forked from Archive/PX4-Autopilot
148 lines
5.1 KiB
C
148 lines
5.1 KiB
C
/****************************************************************************
|
|
*
|
|
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* 3. Neither the name PX4 nor the names of its contributors may be
|
|
* used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/**
|
|
* @file drv_gpio.h
|
|
*
|
|
* Generic GPIO ioctl interface.
|
|
*/
|
|
|
|
#ifndef _DRV_GPIO_H
|
|
#define _DRV_GPIO_H
|
|
|
|
#include <sys/ioctl.h>
|
|
|
|
#ifdef CONFIG_ARCH_BOARD_PX4FMU
|
|
/*
|
|
* PX4FMU GPIO numbers.
|
|
*
|
|
* For shared pins, alternate function 1 selects the non-GPIO mode
|
|
* (USART2, CAN2, etc.)
|
|
*/
|
|
# define GPIO_EXT_1 (1<<0) /**< high-power GPIO 1 */
|
|
# define GPIO_EXT_2 (1<<1) /**< high-power GPIO 1 */
|
|
# define GPIO_MULTI_1 (1<<2) /**< USART2 CTS */
|
|
# define GPIO_MULTI_2 (1<<3) /**< USART2 RTS */
|
|
# define GPIO_MULTI_3 (1<<4) /**< USART2 TX */
|
|
# define GPIO_MULTI_4 (1<<5) /**< USART2 RX */
|
|
# define GPIO_CAN_TX (1<<6) /**< CAN2 TX */
|
|
# define GPIO_CAN_RX (1<<7) /**< CAN2 RX */
|
|
|
|
/**
|
|
* Default GPIO device - other devices may also support this protocol if
|
|
* they also export GPIO-like things. This is always the GPIOs on the
|
|
* main board.
|
|
*/
|
|
# define GPIO_DEVICE_PATH "/dev/px4fmu"
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_BOARD_PX4IO
|
|
/*
|
|
* PX4IO GPIO numbers.
|
|
*
|
|
* XXX note that these are here for reference/future use; currently
|
|
* there is no good way to wire these up without a common STM32 GPIO
|
|
* driver, which isn't implemented yet.
|
|
*/
|
|
/* outputs */
|
|
# define GPIO_ACC1_POWER (1<<0) /**< accessory power 1 */
|
|
# define GPIO_ACC2_POWER (1<<1) /**< accessory power 2 */
|
|
# define GPIO_SERVO_POWER (1<<2) /**< servo power */
|
|
# define GPIO_RELAY1 (1<<3) /**< relay 1 */
|
|
# define GPIO_RELAY2 (1<<4) /**< relay 2 */
|
|
# define GPIO_LED_BLUE (1<<5) /**< blue LED */
|
|
# define GPIO_LED_AMBER (1<<6) /**< amber/red LED */
|
|
# define GPIO_LED_SAFETY (1<<7) /**< safety LED */
|
|
|
|
/* inputs */
|
|
# define GPIO_ACC_OVERCURRENT (1<<8) /**< accessory 1/2 overcurrent detect */
|
|
# define GPIO_SERVO_OVERCURRENT (1<<9) /**< servo overcurrent detect */
|
|
# define GPIO_SAFETY_BUTTON (1<<10) /**< safety button pressed */
|
|
|
|
/**
|
|
* Default GPIO device - other devices may also support this protocol if
|
|
* they also export GPIO-like things. This is always the GPIOs on the
|
|
* main board.
|
|
*/
|
|
# define GPIO_DEVICE_PATH "/dev/px4io"
|
|
|
|
#endif
|
|
|
|
#ifndef GPIO_DEVICE_PATH
|
|
# error No GPIO support for this board.
|
|
#endif
|
|
|
|
/*
|
|
* IOCTL definitions.
|
|
*
|
|
* For all ioctls, the (arg) argument is a bitmask of GPIOs to be affected
|
|
* by the operation, with the LSB being the lowest-numbered GPIO.
|
|
*
|
|
* Note that there may be board-specific relationships between GPIOs;
|
|
* applications using GPIOs should be aware of this.
|
|
*/
|
|
#define _GPIOCBASE 0x2700
|
|
#define GPIOC(_x) _IOC(_GPIOCBASE, _x)
|
|
|
|
/** reset all board GPIOs to their default state */
|
|
#define GPIO_RESET GPIOC(0)
|
|
|
|
/** configure the board GPIOs in (arg) as outputs */
|
|
#define GPIO_SET_OUTPUT GPIOC(1)
|
|
|
|
/** configure the board GPIOs in (arg) as inputs */
|
|
#define GPIO_SET_INPUT GPIOC(2)
|
|
|
|
/** configure the board GPIOs in (arg) for the first alternate function (if supported) */
|
|
#define GPIO_SET_ALT_1 GPIOC(3)
|
|
|
|
/** configure the board GPIO (arg) for the second alternate function (if supported) */
|
|
#define GPIO_SET_ALT_2 GPIOC(4)
|
|
|
|
/** configure the board GPIO (arg) for the third alternate function (if supported) */
|
|
#define GPIO_SET_ALT_3 GPIOC(5)
|
|
|
|
/** configure the board GPIO (arg) for the fourth alternate function (if supported) */
|
|
#define GPIO_SET_ALT_4 GPIOC(6)
|
|
|
|
/** set the GPIOs in (arg) */
|
|
#define GPIO_SET GPIOC(10)
|
|
|
|
/** clear the GPIOs in (arg) */
|
|
#define GPIO_CLEAR GPIOC(11)
|
|
|
|
/** read all the GPIOs and return their values in *(uint32_t *)arg */
|
|
#define GPIO_GET GPIOC(12)
|
|
|
|
#endif /* _DRV_GPIO_H */ |