762d925d20
boards: cubepilot orange/yellow fix BOARD_DSHOT_MOTOR_ASSIGNMENT
2020-09-24 10:53:54 -04:00
2728af4264
boards: cubeorange and cubeyellow disable serial console (used for ADSB on new carrier boards)
...
- add console builds (cubepilot_cubeorange_console) for hardware test rack and developers
2020-09-21 11:53:49 -04:00
fc5caf382c
cubepilot_cubeyellow: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
0d9d1e79e8
cubepilot_cubeorange: Updates for NuttX 9.1.0+ External schedule_note
2020-09-16 21:32:04 -04:00
f9adf861dc
spracing_h7extreme Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
f21925f976
cubepilot_io-v2: Updates for NuttX 9.1.0-
2020-09-16 21:32:04 -04:00
e8e463b875
cubepilot_cubeyellow Updates for NuttX 9.1.0-
...
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
5691bf1dee
cubepilot_cubeorange Updates for NuttX 9.1.0-
...
cubepilot_cubeorange: defconfig MMCSD enable multiblock
2020-09-16 21:32:04 -04:00
c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc
2020-09-07 23:09:20 -04:00
787f9c1213
i2c: use board-specific bus numbering for '-X -b <bus>' CLI
...
As boards don't have their external buses labeled consistently, it was not
useful to use an abstraction.
2020-09-03 15:32:35 -04:00
536877cf0a
boards: add UAVCAN timer override mechanism and CUAV X7 add CAN ( #15348 )
...
* X7Pro adds CAN driver
* UAVCAN timer selection moved to default.cmake
* Modify some details about @CUAVcaijie UAVCAN timer selection moved to default.cmake
* Put some timer parameters to micro_hal.h from board_config.h. Fix all h7 boards
Co-authored-by: honglang <honglang@cuav.net>
2020-08-28 12:16:48 -04:00
2c3441aa90
boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12
...
- reduced now that calibration uses uORB::Subscription
- can likely be reduced further (perhaps < 8) with additional testing
2020-08-21 10:12:13 -04:00
91ad8473ab
boards: cubepilot/cubeorange small fixes and improvements
...
- defconfig UART sync with cube yellow (and other boards)
- manually start ak09916 (Here2) on I2C2 with proper rotation
2020-08-16 17:45:47 -04:00
65ab7cef2e
boards: cubepilot/cubeyellow small fixes and improvements
...
- fix UART config (GPS1, etc)
- TELEM2 enable TX DMA
- init simplify (sync with CubeOrange)
- amber LED use for armed state
- manually start ak09916 (Here2) on I2C2 with proper rotation
2020-08-16 17:45:47 -04:00
cfbf69f2a7
boards: rename Hex -> CubePilot
...
- hex_cube-orange_default -> cubepilot_cubeorange_default
- hex_cube-yellow_default -> cubepilot_cubeyellow_default
2020-07-26 13:55:41 -04:00
Daniel Agar
David Sidrane
SalimTerryLi
Beat Küng
CUAVcaijie