dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
43,557 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

27 Commits

Author SHA1 Message Date
Thomas Stastny 4b920a6628 GotoControl: add go-to control interface to mc position controller 
goto control class handles smoothing of goto setpoints, outputs trajectory setpoint for mc pos control
some minor encapsulation done in mc pos control for readability
new param MPC_YAWAAUTO_MAX limiting heading accelerations in heading smoother
 2023-11-30 17:16:02 +01:00
Roman Bapst dd2322d622
Added PerformanceModel for fixed wing (#22091) 
* created a Performance Model for fixed wing vehicle
- added compensation for maximum climbrate, minimum sinkrate, minimum airspeed and trim airspeed based on weight ratio and air density
- added atmosphere lib to standard atmosphere calculations


---------

Signed-off-by: RomanBapst <bapstroman@gmail.com>
Co-authored-by: Thomas Stastny <thomas.stastny@auterion.com>
 2023-11-21 17:13:50 +01:00
SalimTerryLi 9c467198be module_config: support custom actuators_metadata backed by module-level params 2023-05-02 10:09:52 +02:00
Eric Katzfey 73db1a02ca
modal_io: add rpm unit to parameters (#21473) 2023-04-18 07:41:45 +02:00
Hamish Willee e6eed43648
Spelling errors (#19935) 2022-07-27 14:33:16 +10:00
Beat Küng b2dc9ee710 control_allocator: add title & help url to geometry UI 2022-02-25 08:30:58 +01:00
Beat Küng 9ca58f5e97 actuator outputs: always add reverse range param 
and remove the possibility to set min > max to reverse.

Initially the idea was to add the checkbox on the UI side, to avoid adding
another param, but I don't think I'll go through the extra effort on the
QGC side.
 2022-01-14 12:18:29 -05:00
Beat Küng d1abdd0f8d output drivers: add option to generate a separate output range reversing param 
Makes it a bit easier to configure. Reversing by setting MIN > MAX is still
supported.
 2021-12-24 20:06:13 -05:00
Beat Küng ccc1f0e8fa generate_actuators_metadata: minor additions (index_offset, item_label_prefix) 2021-12-24 20:06:13 -05:00
Beat Küng 5bcc5d3a13 generate_actuators_metadata.py: add mixer rules support 2021-12-24 20:06:13 -05:00
Beat Küng 80300c36b4 parameter units: add 'A' (Ampere) 2021-12-10 09:03:08 -05:00
Beat Küng 357a16aca6 pwm_out_sim: split module.yaml into HIL+SIM files 2021-11-23 12:40:22 -05:00
Beat Küng 36296794c8 module config: add generate_actuators_metadata.py script 2021-11-23 12:40:22 -05:00
Beat Küng 2ff6baa250 actuator params: use module_name as prefix to channel label 2021-11-23 12:40:22 -05:00
Beat Küng 6537f480b1 module.yaml: make long param description optional 
Some params are very simple and don't need more.
 2021-11-23 12:40:22 -05:00
Beat Küng f1686b1abf px4io: add dynamic mixing support 2021-10-18 18:45:19 -04:00
Beat Küng ab1d76ae7d params: use PWM_MAIN_* instead of PWM_FMU_* 2021-10-18 18:45:19 -04:00
Beat Küng 563cf61126 module_schema.yaml: add actuator_output section 
The parameter additions are only used internally for the pwm generator.
 2021-10-18 18:45:19 -04:00
Beat Küng 436258c1c5 config: cleanup ethernet configuration 2021-04-04 21:20:36 -04:00
Beat Küng 2dace0c9ea param: limit short description lenght to 150 for existing, 70 for yaml 2021-03-23 12:55:11 -04:00
garfieldG 3cd9b3c2cf Added support in Mavlink Ethernet channel parameters 
Mavlink Ethernet channel settings such as udp port, remote port and broadcast mode now can be changed dynamically via parameters.
 2021-02-25 08:52:38 -08:00
Hamish Willee 979243f38f
params: make parameter units more consistent (#15502) 2020-08-24 11:33:08 +02:00
Timothy Scott 993fa5bd37 Refactored to work with new battery_status module 2019-12-05 16:38:04 +01:00
Beat Küng d44302c03b module_schema.yaml: add 'decimal' and 'increment' for floats 2019-10-11 08:14:17 +02:00
Beat Küng 5fe4c61b42 rc_input: add RC_PORT_CONFIG param to configure RC port 
The parameter will only be available if the board defines an 'RC' serial
port in SERIAL_PORTS (in default.cmake).
 2019-07-16 08:09:22 +02:00
Beat Küng 4c90d2c025 module_schema: enforce serial config param names to end in _CONFIG or _CFG 
For consistency & documentation
 2018-09-27 23:39:20 +02:00
Beat Küng d418a09e1d module_schema.yaml: move from test/ to validation/ 
It doesn't really fit to test/, and also no other existing place.
 2018-09-25 07:53:29 +02:00