Roman Bapst
bec1a6831e
added method to get gyro bias
...
Signed-off-by: Roman Bapst <roman@px4.io>
2016-06-21 14:13:47 +02:00
Roman Bapst
670c6ca019
change state reset information interface for more convenient handling
...
on firmware side
2016-06-06 13:22:20 +02:00
Paul Riseborough
6a55d908c5
EKF: replace reset event times with event counters
...
Using a 64bit integer was unnecessary given it was only being used to detect a new reset event.
2016-06-01 17:13:00 +10:00
Paul Riseborough
70f76e1a6c
EKF: publish innovation consistency check fail status
2016-06-01 17:13:00 +10:00
Paul Riseborough
e371a303a9
EKF: publish the quaternion reset event
2016-06-01 17:13:00 +10:00
Paul Riseborough
b2e432e211
EKF: publish position and velocity reset data
2016-06-01 17:13:00 +10:00
Paul Riseborough
733862f649
EKF: move the reset status struct to the Ekf class
...
This protects it from being modified externally
2016-06-01 17:13:00 +10:00
Paul Riseborough
4237269fab
EKF: add struct to capture state reset events
2016-06-01 17:13:00 +10:00
Paul Riseborough
65da9173b9
EKF: capture innovation checks and reset events in separate variables
...
rename the innovation check status class variable and remove the reset flags from it.
2016-06-01 17:13:00 +10:00
Paul Riseborough
8125717bf5
EKF: remove un-used airspeed health class variable
...
Airspeed rejection now is captured in _sensor_fault_status
2016-06-01 17:13:00 +10:00
Paul Riseborough
388e500180
EKF: remove un-used magnetometer health class variable
...
replaced by _sensor_health_status
2016-06-01 17:13:00 +10:00
Paul Riseborough
106482b078
EKF: add structure to capture innovation test failures and state resets
2016-06-01 17:13:00 +10:00
Paul Riseborough
d5b5cb5899
EKF: improvements to observation collection
...
Remove unnecessary function calls
Remove un-used functions
Apply a consistent maximum safe data rate check for all observation inputs
2016-05-26 13:27:08 +10:00
Carl Olsson
0fafc49a49
fixed typos ( #147 )
2016-05-22 17:40:43 +02:00
waltjohnson
7c158aa59b
Addressed C99 compiler issues of initializing variables in header and unused included statements.
2016-05-19 09:58:18 -06:00
Paul Riseborough
81469d6621
EKF: Add position, height and velocity reset for EV aiding
2016-05-14 21:17:29 +10:00
Paul Riseborough
3a0fcd03d7
EKF: Add interfaces and variables to use ext vision data
2016-05-14 21:17:29 +10:00
Paul Riseborough
481c624975
EKF: Remove use of vehicle arm status
...
Use single externally set in-air status for all decisions
2016-05-10 10:23:08 +10:00
Paul Riseborough
3cdf56e57c
Merge pull request #122 from CarlOlsson/airspeed_fix
...
fixed_airspeed_healthy_bug
2016-05-09 10:24:22 +10:00
CarlOlsson
ee7d7aeb8a
fixed_airspeed_healthy_bug
2016-05-08 18:30:37 +02:00
Paul Riseborough
c66ed7b662
EKF: Add interface method for filter fault status
2016-05-07 21:18:00 +10:00
Paul Riseborough
020b87933e
EKF: replace fault status struct with a union to facilitate logging
2016-05-07 21:11:16 +10:00
Paul Riseborough
fe9f88a8b4
EKF: test new derivation
...
Use direct attitude parameterisation
Discard scale factors
Add accel bias
2016-05-05 21:23:03 +10:00
Paul Riseborough
10bf05e9a6
EKF: publish the vertical position offset
2016-04-22 08:30:46 +10:00
Lorenz Meier
9487eac505
Merge pull request #98 from priseborough/pr-ekf2StatusReporting
...
EKF: improve reporting of filter status
2016-04-20 11:44:02 +02:00
Roman Bapst
99fc61c27c
ekf2 airspeed fusion:
...
- finished logic for fusion
- fixed bug where previous control status was set in the wrong location
2016-04-19 09:53:31 +02:00
Paul Riseborough
31bf342fc1
EKF: publish GPS check status
2016-04-19 17:38:22 +10:00
Paul Riseborough
6fa13c7806
EKF: publish control mode status
2016-04-19 17:37:27 +10:00
Roman Bapst
60abf07bee
added function to return accelerometer bias
2016-04-18 17:52:16 +02:00
Roman Bapst
f32303de69
added function to return accelerometer bias
2016-04-18 17:00:17 +02:00
Paul Riseborough
e10093854a
EKF: correct outputs for IMU offset
2016-04-12 11:14:31 +10:00
CarlOlsson
81fc086b76
adopted ekf_interface.h
2016-03-30 17:01:03 +02:00
Paul Riseborough
6b2e2dba90
EKF: Add GPS height option and improve height recovery
2016-03-16 10:40:51 +11:00
Paul Riseborough
dca186c6e8
EKF: Add required declarations for optical flow
2016-03-11 11:03:43 +11:00
mcsauder
f9e3db0504
Move variable initializations from header file to constructor to allow C99 compliance.
2016-03-02 08:42:38 +01:00
Paul Riseborough
cd0cac066a
EKF: Calculate and publish horizontal and vertical position accuracy
...
This calculation takes into account the uncertainty of the origin.
Dead reckoning status is also published
2016-02-25 10:38:07 +11:00
Paul Riseborough
a30830a7a9
EKF: Scale position observation noise with GPS quality
...
This allows the filter to adapt to variations in GPs quality.
The range of adjustment in observation noise is limited to the range between a lower limit set by the GPS observation noise parameter and an upper limit set by the no-aiding observation noise.
2016-02-25 10:16:32 +11:00
mcsauder
6c96f45f08
Remove whitespace differences with upstream for pull request.
2016-02-23 19:49:27 -07:00
mcsauder
fad1c87631
Merge upstream and resolve merge conflicts.
2016-02-23 19:29:30 -07:00
mcsauder
72243c4a84
Resolve tab/space differences with upstream master.
2016-02-18 03:28:40 -07:00
mcsauder
437f6ca5fb
Moved initialization to object constructors to allow C99 compiler compatibility.
2016-02-18 03:21:04 -07:00
bugobliterator
263c48d089
EKF: remove dependecies and allow ekf to be built as standalone shared lib
2016-02-17 17:33:18 -08:00
Paul Riseborough
9017e077f8
EKF: Publish the magnetic declination we wish to save for next startup
2016-02-14 22:01:53 +01:00
Roman
ad978c642f
estimator interface:
...
added flag for in_air status of vehicle
2016-02-14 20:43:22 +01:00
Roman
ce0ddc0207
-added comments
...
-removed unused print functions
-removed false _imu_time_last variable (correct is _time_last_imu)
2016-02-14 09:49:26 +01:00
Paul Riseborough
3f81eb7d1b
EKF: fix formatting
2016-02-04 17:15:03 +11:00
Paul Riseborough
7de1d39ce4
EKF: Improve use of position and velocity observation noise parameters
...
Fix bug where noise parameters were not being squared when calculating the observation variance.
Use GPS reported speed accuracy to set velocity observation noise and use the parameter to set the minimum.
2016-02-03 18:15:38 +11:00
bugobliterator
d79e12dfa1
EKF: fix code style
2016-01-31 00:12:16 -08:00
bugobliterator
8200ef4d17
EKF: allocate and unallocate buffer more robustly
2016-01-31 00:12:16 -08:00
bugobliterator
c6249a2825
EKF: change estimator base class name to estimation interface
2016-01-31 00:12:07 -08:00