Revert "Merge pull request #1819 from PX4/chan16" because of #2113

This reverts commit f8c8876642, reversing
changes made to de3888bed7.

src/drivers/px4io/px4io.cpp

@@ -1743,20 +1743,14 @@ PX4IO::io_publish_pwm_outputs()
 	uint16_t ctl[_max_actuators];
 	int ret = io_reg_get(PX4IO_PAGE_SERVOS, 0, ctl, _max_actuators);
 
-	if (ret != OK){
+	if (ret != OK)
 		return ret;
-	}
-
-	unsigned maxouts = sizeof(outputs.output) / sizeof(outputs.output[0]);
-	unsigned actuator_max = (_max_actuators > maxouts) ? maxouts : _max_actuators;
-
 
 	/* convert from register format to float */
-	for (unsigned i = 0; i < actuator_max; i++){
+	for (unsigned i = 0; i < _max_actuators; i++)
 		outputs.output[i] = ctl[i];
-	}
 
-	outputs.noutputs = actuator_max;
+	outputs.noutputs = _max_actuators;
 
 	/* lazily advertise on first publication */
 	if (_to_outputs == 0) {
@@ -2087,13 +2081,13 @@ PX4IO::print_status(bool extended_status)
 		printf("vrssi %u\n", io_reg_get(PX4IO_PAGE_STATUS, PX4IO_P_STATUS_VRSSI));
 	}
 
-	printf("actuators (including S.BUS)");
+	printf("actuators");
 
 	for (unsigned i = 0; i < _max_actuators; i++)
 		printf(" %hi", int16_t(io_reg_get(PX4IO_PAGE_ACTUATORS, i)));
 
 	printf("\n");
-	printf("hardware servo ports");
+	printf("servos");
 
 	for (unsigned i = 0; i < _max_actuators; i++)
 		printf(" %u", io_reg_get(PX4IO_PAGE_SERVOS, i));

src/modules/px4iofirmware/mixer.cpp

@@ -272,9 +272,8 @@ mixer_tick(void)
 
 	if (mixer_servos_armed && should_arm) {
 		/* update the servo outputs. */
-		for (unsigned i = 0; i < PX4IO_SERVO_HARDWARE_COUNT; i++) {
+		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++)
 			up_pwm_servo_set(i, r_page_servos[i]);
-		}
 
 		/* set S.BUS1 or S.BUS2 outputs */
 
@@ -286,9 +285,8 @@ mixer_tick(void)
 
 	} else if (mixer_servos_armed && should_always_enable_pwm) {
 		/* set the disarmed servo outputs. */
-		for (unsigned i = 0; i < PX4IO_SERVO_HARDWARE_COUNT; i++) {
+		for (unsigned i = 0; i < PX4IO_SERVO_COUNT; i++)
 			up_pwm_servo_set(i, r_page_servo_disarmed[i]);
-		}
 
 		/* set S.BUS1 or S.BUS2 outputs */
 		if (r_setup_features & PX4IO_P_SETUP_FEATURES_SBUS1_OUT)

src/modules/px4iofirmware/px4io.h

@@ -51,8 +51,7 @@
 /*
  * Constants and limits.
  */
-#define PX4IO_SERVO_COUNT		16
-#define PX4IO_SERVO_HARDWARE_COUNT	8
+#define PX4IO_SERVO_COUNT		8
 #define PX4IO_CONTROL_CHANNELS		8
 #define PX4IO_CONTROL_GROUPS		4
 #define PX4IO_RC_INPUT_CHANNELS		18

src/modules/px4iofirmware/registers.c

@@ -285,7 +285,7 @@ registers_set(uint8_t page, uint8_t offset, const uint16_t *values, unsigned num
 	case PX4IO_PAGE_DIRECT_PWM:
 
 		/* copy channel data */
-		while ((offset < PX4IO_SERVO_COUNT) && (num_values > 0)) {
+		while ((offset < PX4IO_CONTROL_CHANNELS) && (num_values > 0)) {
 
 			/* XXX range-check value? */
 			if (*values != PWM_IGNORE_THIS_CHANNEL) {

src/modules/px4iofirmware/sbus.c

@@ -163,8 +163,8 @@ sbus1_output(uint16_t *values, uint16_t num_values)
 void
 sbus2_output(uint16_t *values, uint16_t num_values)
 {
-	// XXX S.BUS2 is not implemented, fall back to S.BUS1
-	sbus1_output(values, num_values);
+	char b = 'B';
+	write(sbus_fd, &b, 1);
 }
 
 bool