px4-firmware/msg/CMakeLists.txt

275 lines
7.8 KiB
CMake
Raw Normal View History

############################################################################
#
# Copyright (c) 2016 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Support IN_LIST if() operator
cmake_policy(SET CMP0057 NEW)
2017-09-25 19:00:59 -03:00
set(msg_files
actuator_armed.msg
actuator_controls.msg
actuator_outputs.msg
adc_report.msg
airspeed.msg
airspeed_validated.msg
battery_status.msg
2017-05-01 08:18:28 -03:00
camera_capture.msg
camera_trigger.msg
cellular_status.msg
collision_constraints.msg
2019-10-14 21:09:39 -03:00
collision_report.msg
commander_state.msg
cpuload.msg
debug_array.msg
debug_key_value.msg
2017-06-07 10:37:25 -03:00
debug_value.msg
debug_vect.msg
differential_pressure.msg
distance_sensor.msg
ekf2_timestamps.msg
ekf_gps_drift.msg
esc_report.msg
esc_status.msg
estimator_innovations.msg
estimator_sensor_bias.msg
estimator_states.msg
estimator_status.msg
follow_target.msg
generator_status.msg
geofence_result.msg
gps_dump.msg
gps_inject_data.msg
home_position.msg
hover_thrust_estimate.msg
input_rc.msg
iridiumsbd_status.msg
irlock_report.msg
landing_gear.msg
landing_target_innovations.msg
landing_target_pose.msg
led_control.msg
log_message.msg
logger_status.msg
manual_control_setpoint.msg
mavlink_log.msg
mission.msg
mission_result.msg
mount_orientation.msg
multirotor_motor_limits.msg
navigator_mission_item.msg
obstacle_distance.msg
offboard_control_mode.msg
2019-10-12 01:55:12 -03:00
onboard_computer_status.msg
optical_flow.msg
orb_test.msg
orb_test_large.msg
orb_test_medium.msg
2018-12-04 09:53:53 -04:00
orbit_status.msg
parameter_update.msg
2018-04-07 14:37:47 -03:00
ping.msg
position_controller_landing_status.msg
position_controller_status.msg
position_setpoint.msg
position_setpoint_triplet.msg
power_button_state.msg
power_monitor.msg
pwm_input.msg
px4io_status.msg
qshell_req.msg
add posix shell squashed & rebased version, not including: - listener changes - src/firmware renaming Commits: tag_to_version.py: fix Python3 error subprocess.communicate returns bytes instead of a str which is not the same for Python3. Therefore, we need to decode the bytes. cmake: remove folder src/firmware The folder src/firmware was not intuitive. Why would the binaries for SITL be inside a src and why even inside a src/firmware folder. Also, the rootfs was put there which made it even more confusing. The CMakeLists.txt files are moved into cmake/ and get now called from the main CMakeLists.txt. qshell: support for return value Instead of just sending commands, qshell will now also wait until the command has finished on QURT and sent back a return value. This will allow all modules on the DSP side to be spawned from the Linux side meaning that we only need one config/startup file instead of two. adb_upload: create folders before pushing Previously the script failed if the folder on the destination was not already existing. This therefore makes pushing easier. posix: spawn PX4 modules in bash This adds the possibility to spawn PX4 modules out of bash. Basically, the main executable can now be started as a server/daemon or as a client. The server replaces the existing functionality of the main exe with the pxh shell, however, it also opens a pipe that clients can talk to. Clients can run or spawn PX4 modules or commands by connecting to the server over the pipe. They clients will get the stdout and return value of their commands via a client specific pipe back. This work will allow to start all modules using a bash script similar to the way it is done in NuttX where the NuttShell scripts the startup scripts and starts the modules. SITL: use new client shell in SITL This is a first step to use the new shell capabilities for SITL. The new startup bash script rcS merges (and therefore replaces) the two existing scripts rcS_gazebo_iris and rcS_jmavsim_iris. More cleanup will be necessary for the rest of the SITL startup scripts. Snapdragon: use new shell to start all modules Instead of different mainapp.config and px4.config files, we can now use a unified rcS bash script which starts all the modules based on parameters, mainly the SYS_AUTOSTART param. Snapdragon: fix the airframe description pxh: argv needs to end with a nullptr The comment was wrong that argv needs an additional 0 termination. Instead it needs a nullptr at the end. px4_posix_tasks: variable cleanup The px4_task_spawn_cmd function got a cleanup while debugging, however, no functional changes. Snapdragon: move some drivers to 4100 config These drivers are supported by the community, so they go into the 4100 config. Snapdragon: update 210qc platform px4_daemon: use doxygen comments apps.h_in: fix string printf: use .c_str() px4_daemon: \b -> \n in printf px4_daemon: handle error in generate_uuid (close the file on error) posix main: some clarifications in comment (it's the symlinks not the script aliases) cmake: remove new install command again This one was probably wrong and untested. Installing needs revisiting. POSIX: remove argument USES_TERMINAL POSIX: copy init and mixer files for SITL Instead of using non-working install commands, the mixer and startup files are now copied as part of the build in cmake. adb_upload.sh: remove leftover commented printf POSIX main: just the pointer instead of memmove POSIX main: remove chroot chroot is removed because it hasn't been used anywhere and seems untested. px4_daemon: remove client pipe when cleaning up px4_daemon: fail if the client pipe already exists The client pipe is supposed to be specific (by UUID), so the path shouldn't exist already. history: limit the number of history entries This is a protection to avoid filling the memory if we are entering a lot of commands (e.g. auto-generated). px4_daemon: add a threadsafe map and use it px4_daemon: whitespace px4_daemon: fix client parsing Sometimes the client ends up reading more than one packet in one read. The parsing is not made for this and would require a (ring)buffer for it. The solution of this commit just reads as much as needed from the pipe which avoids having to do buffering and parsing. posix: changes sitl_run.sh and main.cpp cleanup This changes the paths in sitl_run.sh quite a bit to allow the px4 binary to run in the rootfs directory which should make it convenient and very close to the NuttX variant. Also main.cpp got a big cleanup after the big rebase with some conflicts. Quite some functionality was removed but it has yet to be seen if it needs to be re-added. px4_log: cleanup log levels, now they make sense Before DEBUG and INFO log levels where inverted which didn't make much sense in my eyes. dataman: fix path for bash shell logger: fix paths for bash shell mavlink: fix paths for bash shell param: fix path for bash shell inav: fix paths for bash shell sdlog2: fix paths for bash shell ROMFS: add forgotten mixer to list SITL init: more models, more options - Support for different models using the unified startup script rcS. - Support to choose the estimator by setting the environment variable PX4_ESTIMATOR. - Support to choose the logger by setting the environment variable PX4_LOGGER. rcS: fix string comparison listener: use template file Instead of having all of the C++ code inside the Python file it is nicer to have a separate template file with the C++ headers, etc. px4_log: add PX4_INFO_RAW for raw printfs This allows to do custom formatting but is still transported over sockets to clients. topic_listener: use PX4_INFO_RAW instead of printf commander: use PX4_INFO_RAW for status listener: rewrite to classes and factory posix: fix some argument warnings generate_listener.py: by accident changed shebang listener: big refactor of the generator Hopefully this makes it easier to read and change in the future. rcS: manually take over rebase changes listener: remove leftover try listener: properly clean up topic instance rcS: take over some vehicle specific changes posix-configs: vehicle specifics to separate files posix-configs: remove leftover lines uORBDevices: new PX4_INFO_RAW instead of printf px4_log: just use printf on NuttX listener: use less binary space, strip on NuttX generate_listener.py: remove commented code cmake: fix syntax error from merge px4_daemon: fixes after rebase of apps.h/cpp fix px4_daemon: namespace missing posix: only create stub for fsync on QURT unitests: reduce dependencies of param test This makes the unit test compile and link again after the bash changes. QURT: some compile fixes after a rebase SITL: arg change for sitl_run.sh to use rcS_test This allows to use a custom startup file for testing. SITL: add the folder test_data SITL: implement shutdown command as systemcmd The shutdown command needs to be a proper systemcmd, otherwise the alias and symlink generation doesn't work and we end up calling shutdown of the host computer which is to be avoided. px4fmu_test: same IO_pass mixer as px4fmu_default px4fmu_test: use normal quad x mixer There is no good reason to use a specific test mixer, except more cmake code around it. Therefore just use the same mixer as default, and at some point px4fmu_test and px4fmu_default can get merged POSIX: cleanup, dir and symlink fixes This cleans up the logic behind the symlinking and creating directories. POSIX: correct arg order in usage info tests: fix paths for SITL tests POSIX: printf fix sitl_run.sh: try to make this run on Mac as well cmake: try to make jenkins happier Path cleanup, the bin is no longer in src/firmware POSIX: fix symlink logic SITL: prefix all exported env variables cmake: fix path for ROS tests integrationtests: fix log path launch: try to make tets with ROS working again px4_defines: fix after wrong merge deconflicting px4_defines: get paths for POSIX correct cmake: fix cmake arguments This was fine with cmake 3.6 but did not work with cmake 3.2.2 cmake: use cp instead of cmake -E copy cmake -E copy does not support copying multiple files with versions < 3.5. Therefore, just use cp for now. ROMFS: fix build error after rebase cmake: fix paths in configs launch: use `spawn_model` again cmake: various fixes after big rebase param: path fixes after rebase posix platform: fixes after rebase test_mixer: fix screwed up rebase
2018-08-02 16:32:51 -03:00
qshell_retval.msg
radio_status.msg
rate_ctrl_status.msg
rc_channels.msg
rc_parameter_map.msg
rpm.msg
safety.msg
satellite_info.msg
sensor_accel.msg
2019-10-14 21:09:39 -03:00
sensor_accel_fifo.msg
sensor_baro.msg
sensor_combined.msg
sensor_correction.msg
sensor_gps.msg
sensor_gyro.msg
sensor_gyro_fft.msg
2019-10-14 21:09:39 -03:00
sensor_gyro_fifo.msg
sensor_mag.msg
sensor_preflight_mag.msg
sensor_selection.msg
sensors_status_imu.msg
subsystem_info.msg
system_power.msg
task_stack_info.msg
tecs_status.msg
telemetry_status.msg
test_motor.msg
timesync.msg
timesync_status.msg
trajectory_bezier.msg
trajectory_waypoint.msg
transponder_report.msg
2017-02-10 10:19:03 -04:00
tune_control.msg
uavcan_parameter_request.msg
uavcan_parameter_value.msg
ulog_stream.msg
ulog_stream_ack.msg
vehicle_acceleration.msg
vehicle_air_data.msg
vehicle_angular_acceleration.msg
vehicle_angular_velocity.msg
vehicle_attitude.msg
vehicle_attitude_setpoint.msg
vehicle_command.msg
vehicle_command_ack.msg
vehicle_constraints.msg
vehicle_control_mode.msg
vehicle_global_position.msg
vehicle_gps_position.msg
vehicle_imu.msg
vehicle_imu_status.msg
vehicle_land_detected.msg
vehicle_local_position.msg
vehicle_local_position_setpoint.msg
vehicle_magnetometer.msg
2018-07-11 09:44:43 -03:00
vehicle_odometry.msg
vehicle_rates_setpoint.msg
vehicle_roi.msg
vehicle_status.msg
vehicle_status_flags.msg
vehicle_trajectory_bezier.msg
vehicle_trajectory_waypoint.msg
vtol_vehicle_status.msg
wheel_encoders.msg
wind_estimate.msg
yaw_estimator_status.msg
)
set(deprecated_msgs
ekf2_innovations.msg # 2019-11-22, Updated estimator interface and logging; replaced by 'estimator_innovations'.
)
foreach(msg IN LISTS deprecated_msgs)
if(msg IN_LIST msg_files)
get_filename_component(msg_we ${msg} NAME_WE)
list(APPEND invalid_msgs ${msg_we})
endif()
endforeach()
if(invalid_msgs)
list(LENGTH invalid_msgs invalid_msgs_size)
if(${invalid_msgs_size} GREATER 1)
foreach(msg IN LISTS invalid_msgs)
string(CONCAT invalid_msgs_cs ${invalid_msgs_cs} "'${msg}', ")
endforeach()
STRING(REGEX REPLACE ", +$" "" invalid_msgs_cs ${invalid_msgs_cs})
message(FATAL_ERROR "${invalid_msgs_cs} are listed as deprecated. Please use different names for the messages.")
else()
message(FATAL_ERROR "'${invalid_msgs}' is listed as deprecated. Please use a different name for the message.")
endif()
endif()
if(NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
# Check that the msg directory and the CMakeLists.txt file exists
if(EXISTS ${EXTERNAL_MODULES_LOCATION}/msg/CMakeLists.txt)
add_subdirectory(${EXTERNAL_MODULES_LOCATION}/msg external_msg)
# Add each of the external message files to the global msg_files list
foreach(external_msg_file ${config_msg_list_external})
list(APPEND msg_files ${EXTERNAL_MODULES_LOCATION}/msg/${external_msg_file})
endforeach()
endif()
endif()
2017-09-25 19:00:59 -03:00
# headers
set(msg_out_path ${PX4_BINARY_DIR}/uORB/topics)
set(msg_source_out_path ${CMAKE_CURRENT_BINARY_DIR}/topics_sources)
set(uorb_headers ${msg_out_path}/uORBTopics.hpp)
2017-09-25 19:00:59 -03:00
set(uorb_sources ${msg_source_out_path}/uORBTopics.cpp)
foreach(msg_file ${msg_files})
get_filename_component(msg ${msg_file} NAME_WE)
list(APPEND uorb_headers ${msg_out_path}/${msg}.h)
list(APPEND uorb_sources ${msg_source_out_path}/${msg}.cpp)
endforeach()
if (px4_constrained_flash_build)
set(added_arguments --constrained-flash)
endif()
2017-09-25 19:00:59 -03:00
# Generate uORB headers
add_custom_command(OUTPUT ${uorb_headers}
COMMAND ${PYTHON_EXECUTABLE} tools/px_generate_uorb_topic_files.py
--headers
-f ${msg_files}
-i ${CMAKE_CURRENT_SOURCE_DIR}
-o ${msg_out_path}
-e templates/uorb
-t ${CMAKE_CURRENT_BINARY_DIR}/tmp/headers
-q
${added_arguments}
DEPENDS
${msg_files}
templates/uorb/msg.h.em
templates/uorb/uORBTopics.hpp.em
tools/px_generate_uorb_topic_files.py
tools/px_generate_uorb_topic_helper.py
2017-09-25 19:00:59 -03:00
COMMENT "Generating uORB topic headers"
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
VERBATIM
)
add_custom_target(uorb_headers DEPENDS ${uorb_headers})
2017-09-25 19:00:59 -03:00
# Generate uORB sources
add_custom_command(OUTPUT ${uorb_sources}
COMMAND ${PYTHON_EXECUTABLE} tools/px_generate_uorb_topic_files.py
--sources
-f ${msg_files}
-i ${CMAKE_CURRENT_SOURCE_DIR}
-o ${msg_source_out_path}
-e templates/uorb
-t ${CMAKE_CURRENT_BINARY_DIR}/tmp/sources
-q
${added_arguments}
DEPENDS
${msg_files}
templates/uorb/msg.cpp.em
templates/uorb/uORBTopics.cpp.em
tools/px_generate_uorb_topic_files.py
tools/px_generate_uorb_topic_helper.py
2017-09-25 19:00:59 -03:00
COMMENT "Generating uORB topic sources"
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
VERBATIM
)
add_library(uorb_msgs ${uorb_sources})
target_link_libraries(uorb_msgs PRIVATE m)
add_dependencies(uorb_msgs prebuild_targets uorb_headers)