px4-firmware/msg/PositionSetpoint.msg

38 lines
1.8 KiB
Plaintext
Raw Normal View History

2015-01-28 02:54:58 -04:00
# this file is only used in the position_setpoint triple as a dependency
2018-08-07 10:42:32 -03:00
uint64 timestamp # time since system start (microseconds)
2015-01-28 02:54:58 -04:00
uint8 SETPOINT_TYPE_POSITION=0 # position setpoint
uint8 SETPOINT_TYPE_VELOCITY=1 # velocity setpoint
uint8 SETPOINT_TYPE_LOITER=2 # loiter setpoint
uint8 SETPOINT_TYPE_TAKEOFF=3 # takeoff setpoint
uint8 SETPOINT_TYPE_LAND=4 # land setpoint, altitude must be ignored, descend until landing
uint8 SETPOINT_TYPE_IDLE=5 # do nothing, switch off motors or keep at idle speed (MC)
bool valid # true if setpoint is valid
uint8 type # setpoint type to adjust behavior of position controller
2015-01-28 02:54:58 -04:00
float32 vx # local velocity setpoint in m/s in NED
float32 vy # local velocity setpoint in m/s in NED
float32 vz # local velocity setpoint in m/s in NED
2015-01-28 02:54:58 -04:00
float64 lat # latitude, in deg
float64 lon # longitude, in deg
float32 alt # altitude AMSL, in m
float32 yaw # yaw (only for multirotors), in rad [-PI..PI), NaN = hold current yaw
bool yaw_valid # true if yaw setpoint valid
2015-01-28 02:54:58 -04:00
float32 yawspeed # yawspeed (only for multirotors, in rad/s)
bool yawspeed_valid # true if yawspeed setpoint valid
2015-01-28 02:54:58 -04:00
float32 loiter_radius # loiter radius (only for fixed wing), in m
bool loiter_direction_counter_clockwise # loiter direction is clockwise by default and can be changed using this field
2016-01-22 08:29:27 -04:00
float32 acceptance_radius # navigation acceptance_radius if we're doing waypoint navigation
2016-01-22 08:29:27 -04:00
float32 cruising_speed # the generally desired cruising speed (not a hard constraint)
bool gliding_enabled # commands the vehicle to glide if the capability is available (fixed wing only)
float32 cruising_throttle # the generally desired cruising throttle (not a hard constraint), only has an effect for rover
bool disable_weather_vane # VTOL: disable (in auto mode) the weather vane feature that turns the nose into the wind