Ardupilot2/libraries/AP_HAL_ChibiOS/hwdef/QioTekZealotF427/README.md
QioTek e4f4868d9b HAL_ChibiOS: add QMC5883L on QioTekZealotF427
add QMC5883L on QioTekZealotF427
2020-11-22 06:10:34 +11:00

51 lines
1.2 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

## QioTekZealotF427 Flight Controller
The QioTek Zealot F427 flight controller is sold by a range of resellers listed on the QIOTEK(http://www.Qio-Tek.com)
## Features
• STM32F427VIT6 microcontroller
• Three IMUs, one ICM20689(SPI), one ICM20602(SPI), one BMI088(SPI)
• internal heater for IMUs temperature control
• internal Soft Rubber Damping Ball isolation for All interna IMUs
• Two barometers, one DPS310(SPI), one MS5611(interna I2C)
• builtin IST8310 or QMC5883L magnetometer(interna I2C)
• builtin analog OSD(SPI)
• builtin RAMTRON(SPI)
• microSD card slot
• 5 UARTs plus USB(Type-C)
• PPM & S.Bus input
• 14 PWM outputs
• 4 Relay outputs
• one I2C and one CAN ports
• one S.Bus output(inverter Share Serial5)
• External Buzzer
• builtin RGB LED
• two voltage & current monitoring and servo rail voltage monitoringsupport to 36V)
• two ADC inputs(default one for RSSI, one for Airspeed sensor, both support to 6.6V)
• servo rail BEC independent power input for servos
• builtin BEC6S 1.5Apower inputshare power2 module voltage monitoring
• external safety Switch
• external USB connectors (Type-C USB and JST GH1.25)