Niels Joubert
a5beef00d1
GPS: Official Swift Binary Protocol GPS Driver v3 for Piksi GPS
...
DRIVER FEATURES:
- All logic for RTK vs Normal now lives inside Piksi
- Supports observation uplink through telem radio
- Supports full SBP packet logging
- Reports high-rate green blinking to indicate RTK lock.
- Switchable to accept only Float or Integer RTK locks.
THIS REQUIRES PIKSI FIRMWARE v0.14 OR HIGHER
- Uses Piksi's new Pseudo-Absolute-Positioning mode
- Onboard Piksi must have Pseudo-Absolute mode enabled
- Ground Station Piksi must have a surveyed location in settings
- Ground Station Piksi must send its location to Onboard Piksi.
NEXT STEPS REQUIRED:
- EKF needs to take higher accuracy GPS into account
- EKF needs to take GPS RTK height into account
- GCS needs to support sending SBP observation packets
--- MAVProxy patch forthcoming
2015-04-24 08:01:32 +10:00
Fergus Noble
0480867de2
SITL: Update SBP simulation functions for pseudo-absolute mode
2015-04-24 08:01:32 +10:00
Paul Riseborough
405862bd8f
AP_AHRS: Reduce time delay for EKF initialisation
2015-04-23 20:35:52 +09:00
Paul Riseborough
4a5bf0a266
AP_NavEKF: Reduce EKF start time
...
Makes EKF start conditional on DCM solution tilt error
2015-04-23 20:35:48 +09:00
Paul Riseborough
5184bca87f
AP_AHRS: Prevent DCM reporting good tilt error when inverted
2015-04-23 20:35:39 +09:00
Paul Riseborough
ea8217bd3a
AP_AHRS: Reduce time constant on filtering of DCM error reporting
...
Reduces time constant from 2 to 1 second to make data more useful for pre-flight alignment checks by the EKF
2015-04-23 20:35:35 +09:00
Randy Mackay
7e43eaafab
GPS: TYPE param description to PX4-UAVCAN
2015-04-23 20:17:26 +09:00
Randy Mackay
6e30093924
AP_AHRS: correct sanity checks on update_trig
2015-04-23 09:45:43 +09:00
Jonathan Challinger
6a6ccb4f32
AP_AHRS: add sanity checks
2015-04-22 21:50:51 +09:00
Randy Mackay
c6f71ea2e0
AHRS: make get_error_rp and get_error_yaw const
2015-04-21 22:42:17 +09:00
Randy Mackay
18a73d8630
Camera: use camera feedback flag
2015-04-21 22:22:57 +09:00
Randy Mackay
26383183d2
GCS_MAVLink: version update after generate
2015-04-21 22:22:54 +09:00
Randy Mackay
48c6803717
GCS_MAVLink: generate after fixing camera feedback flags
2015-04-21 22:22:52 +09:00
Randy Mackay
8e2616ddcf
GCS_MAVLink: prefix camera feedback flags
2015-04-21 22:22:49 +09:00
Dario Lindo Andres
a21d328b93
GCS_Mavlink: Update ardupilotmega.xml
...
Define PHOTO flag on CAMERA_FEEDBACK_FLAGS.
2015-04-21 22:22:47 +09:00
Randy Mackay
8ced9cc904
Gimbal: only include for high performance CPUs
2015-04-21 21:47:18 +09:00
Randy Mackay
93ba2d2d32
Mount_MAVLink: uses vehicle's sysid
2015-04-21 21:47:17 +09:00
Randy Mackay
e726a05f3b
Gimbal: fix to parameter init order
...
resolves a compiler warning
2015-04-21 21:47:16 +09:00
Randy Mackay
e9b2153672
Gimbal: formatting fixes
...
Also isCopterFlipped returns bool instead of uint8_t
No functional change
2015-04-21 21:47:15 +09:00
Randy Mackay
db6bb295c7
Mount: add gimbal parameter descriptions
2015-04-21 21:47:14 +09:00
Randy Mackay
924a3b2c67
GCS_MAVLink: version update after generate
2015-04-21 21:47:13 +09:00
Randy Mackay
9f10c43708
GCS_MAVLink: generate after GIMBAL/GOPRO msgs added
2015-04-21 21:47:12 +09:00
Angus Peart
86b81120fd
GCS_MAVLink: update gopro message definitions
2015-04-21 21:45:53 +09:00
Jonathan Challinger
231f776dd7
AP_Gimbal: change isCopterFlipped()
2015-04-21 21:45:52 +09:00
Arthur Benemann
e59c6ddbae
AP_SmallEKF: increase start-up time of the SmallEKF
2015-04-21 21:45:51 +09:00
Arthur Benemann
21b909f670
AP_Gimbal: report gimbal angles using a 312 rotation vector
2015-04-21 21:45:50 +09:00
Arthur Benemann
2850c7ab4a
AP_Gimbal: nest AP_Gimbal files into AP_Mount library
2015-04-21 21:45:49 +09:00
Arthur Benemann
608017ba4a
AP_Gimbal: optimize function calls using const refrences
2015-04-21 21:45:48 +09:00
Arthur Benemann
03c0e17a4d
AP_Gimbal: fix typo
2015-04-21 21:45:47 +09:00
Arthur Benemann
03974c93bb
AP_Gimbal: use new quaternion math to handle gimbal lock issue
2015-04-21 21:45:46 +09:00
Arthur Benemann
255c5b3025
AP_Mount: report MAVLink gimbal angle to the GCS
2015-04-21 21:45:45 +09:00
Arthur Benemann
b3c35aee4e
AP_Gimbal: fix problem with rotation math on control loop
2015-04-21 21:45:44 +09:00
Arthur Benemann
4bdf909bbf
AP_Mount: Create new copter parameters to hold gimbal settings
2015-04-21 21:45:43 +09:00
Arthur Benemann
cf2377d113
AP_Gimbal: Move gimbal parameters to a structure
2015-04-21 21:45:42 +09:00
Arthur Benemann
9b94f26583
AP_Gimbal: Relax minimal angle constrains on the gimbal
2015-04-21 21:45:41 +09:00
Arthur Benemann
a05fe7e117
AP_Gimbal: Re-implement the target low-pass filter
2015-04-21 21:45:40 +09:00
Arthur Benemann
b3dd8891c8
AP_Mount: Use AP_Gimbal on the AP_Mount_MAVLink class
2015-04-21 21:45:38 +09:00
Arthur Benemann
ee8c92c850
AP_Gimbal: clean-up for AP_Mount merge
2015-04-21 21:45:37 +09:00
Arthur Benemann
4ad3e786a5
AP_NavEKF: fix initialization of the SmallEKF
...
The constructor 'states' variable was not being called. To make sure other variables where also zeroed now
2015-04-21 21:45:36 +09:00
Arthur Benemann
0189f80462
AP_Gimbal: update getGimbalRateDemVecTilt to use quaternions
2015-04-21 21:45:35 +09:00
Arthur Benemann
4bdae02cfd
AP_Gimbal: disable gimbal motors if copter is fliped
2015-04-21 21:45:34 +09:00
Arthur Benemann
ebaf1e28b1
AP_Gimbal: smooth the RC input with a low pass filter
2015-04-21 21:45:33 +09:00
Arthur Benemann
534790634b
AP_Gimbal: add a radio failsafe state to the gimbal
2015-04-21 21:45:32 +09:00
Arthur Benemann
1da4be3a87
AP_Gimbal: initial implementation of the rate controlled gimbal library
2015-04-21 21:45:30 +09:00
Arthur Benemann
1d9beed42f
AP_SmallEKF: add function to report if the EKF is stable
2015-04-21 21:45:29 +09:00
Arthur Benemann
7b28bf7d44
AP_NavEKF: Remove small EKF dependency on navigation EKF
2015-04-21 21:45:28 +09:00
Arthur Benemann
558a69bdca
Mount_MAVLink: remove code now in AP_Gimbal
2015-04-21 21:44:56 +09:00
Jonathan Challinger
2053d5e42e
GCS_MAVlink: add GIMBAL_ and GOPRO_ messages
2015-04-21 21:40:05 +09:00
Randy Mackay
87e6452ee9
Mission: bug fix when jump target is zero
...
This would result in copter flying to a waypoint high above home
2015-04-21 20:42:49 +09:00
Andrew Tridgell
a0969905ce
AP_AHRS: make get_error_rp() and get_error_yaw() const
...
this makes them usable by multiple consumers, and allows use by EKF
2015-04-21 21:42:17 +10:00
Andrew Tridgell
2dfe3cb844
DataFlash: added a perf counter for microSD overruns
...
this allows us to tell if a microSD can handle a high logging rate
2015-04-21 20:45:30 +10:00
Andy Piper
b0937154f5
DataFlash: log compass health
...
This patch simply logs the health of each compass for easy diagnosis.
2015-04-21 13:18:24 +09:00
Andrew Tridgell
c153d31dd2
DataFlash: speed up DataFlash in Replay
2015-04-21 10:14:41 +10:00
Andrew Tridgell
dcb25632fb
AP_Compass: removed old setHIL compass offset
2015-04-21 08:30:05 +10:00
Andrew Tridgell
a4bad1c703
HAL_SITL: use SIM_MAG_OFS in SITL compass
2015-04-21 08:29:51 +10:00
Andrew Tridgell
1ce9cb693a
SITL: added SIM_MAG_OFS for setting compass offsets in SITL
2015-04-21 08:29:27 +10:00
Andrew Tridgell
179e47c618
HAL_Linux: prevent time from going backwards in Replay
2015-04-20 15:12:51 +10:00
Andrew Tridgell
d7000c4105
AP_Compass: fixed compass timestamps in Replay
2015-04-20 15:12:51 +10:00
Randy Mackay
337a94e52e
Camera: remove empty configure_msg method
2015-04-20 13:50:15 +09:00
Randy Mackay
d456b97fd2
Camera: control_cmd triggers pic
2015-04-20 13:50:12 +09:00
Jaime Machuca
38491c4ff7
Camera: fix mission cmds sending msgs to components
...
mission commands were triggering the sending of
mavlink mission items when they should have been sending
command long messages
2015-04-20 13:50:10 +09:00
Randy Mackay
4eb3263653
Camera: mission cmds send do-digicam msgs to components
...
This allows digicam-control and digicam-configure mission
command to trigger sending the equivalent mavlink messages
to components
2015-04-20 13:50:08 +09:00
Randy Mackay
8dcd555037
Camera: trigger_pic sends do-digicam-control to components
...
This (optionally) allows pictures triggered from ch7/ch8
switch to send a mavlink do-digicam-control message to
components
2015-04-20 13:50:06 +09:00
Randy Mackay
1f705eb6a3
GCS_MAVLink: add send_to_components method
2015-04-20 13:50:04 +09:00
Randy Mackay
888c2289ce
Mission: support do-digicam-control parameters
2015-04-20 13:50:01 +09:00
Peter Barker
c95348c1d9
SITL: Avoid run-time FPEs due to bad gyro settings if SIM_DRIFT_TIME is set to 0
...
_gyro_drift essentially suffers a divide-by-zero if SIM_DRIFT_TIME is 0. The gyro initialisation routines in AP_InertialSensor do not return once the generated NaN propogates back to them.
2015-04-19 07:24:45 +10:00
Jonathan Challinger
12957867fd
AC_PosControl: fix thr twitch when changing modes
2015-04-18 12:38:44 +09:00
Randy Mackay
44d2ae06fb
Mount: unix style line endings
2015-04-17 22:59:34 +09:00
Randy Mackay
06ea18f97e
Filter: fix LPF example sketch
2015-04-17 22:54:06 +09:00
Randy Mackay
99a9a88529
Filter: dt check fix for LPF
2015-04-17 10:59:03 +09:00
Jonathan Challinger
f20a91ec95
Filter: add dt<0 check to LPF
2015-04-17 10:47:06 +09:00
Randy Mackay
22e1156c31
Filter: add some comments to LowPassFilter
2015-04-17 10:47:04 +09:00
Jonathan Challinger
738b1967ad
AC_PosControl: use LowPassFilterVector2f
2015-04-17 10:47:01 +09:00
Jonathan Challinger
8f667b3d1c
AC_PosControl: fix up comments
2015-04-17 10:46:59 +09:00
Jonathan Challinger
4993fd4d71
AP_Motors: use new lowpass filter
2015-04-17 10:46:47 +09:00
Jonathan Challinger
87500d9d70
AC_AttitudeControl: use new lowpass filter
2015-04-17 10:46:45 +09:00
Jonathan Challinger
76da2868d0
Filter: rework LowPassFilter
2015-04-17 10:46:42 +09:00
Leonard Hall
c2a6a0a9e2
AC_PosControl: add accel filter parameter
2015-04-16 21:00:45 +09:00
Leonard Hall
a632a57d79
AC_PosControl: accessors to log z-axis vel and accel
2015-04-16 21:00:32 +09:00
Leonard Hall
0aca3c4be6
AC_PosControl: add relax Alt Hold controllers
2015-04-16 21:00:25 +09:00
Leonard Hall
24b8d32b0e
AC_AttitudeControl: add comment
2015-04-16 21:00:22 +09:00
Leonard Hall
7cb3c4ba39
AC_PosControl: add feed forward to Alt Hold
2015-04-16 21:00:20 +09:00
Randy Mackay
a1e6a3ee32
AC_PosControl: minor format fix
2015-04-16 21:00:14 +09:00
Jonathan Challinger
3e0dab7b2d
AC_PosControl: remove accel error filter and set throttle output filter instead
2015-04-16 21:00:07 +09:00
Jonathan Challinger
b7f7624aac
AC_AttitudeControl: add throttle filter cutoff parameter to set_throttle_out functions
2015-04-16 21:00:04 +09:00
Jonathan Challinger
e80776f1f5
AP_Motors: remove MOT_THR_FILT parameter and add interface to configure filter
2015-04-16 21:00:01 +09:00
Jonathan Challinger
518e798f53
AC_AttitudeControl: rework angle_boost
2015-04-16 20:59:58 +09:00
Jonathan Challinger
7abd02baf2
AC_PosControl: change int32/int16 to float in accel_to_throttle
2015-04-16 20:59:55 +09:00
Jonathan Challinger
d14893fcd5
AC_PosControl: don't limit throttle any more
2015-04-16 20:59:51 +09:00
Jonathan Challinger
f3555d0d43
AC_AttitudeControl: modify throttle interface to specify stabilization
2015-04-16 20:59:45 +09:00
Jonathan Challinger
5c2341009a
AC_AttitudeControl: throttle is a float
2015-04-16 20:59:42 +09:00
Jonathan Challinger
8e442675a7
AP_Motors: introduce set_stabilize(bool), specifies whether torque demands should be output
2015-04-16 20:59:40 +09:00
Jonathan Challinger
bc2afb31dd
AP_Motors: virtual not necessary in child class
2015-04-16 20:59:37 +09:00
Jonathan Challinger
a2c69fe90d
AP_Motors: add optional motor output throttle filter
2015-04-16 20:59:31 +09:00
Leonard Hall
4d9da2720b
AC_AttitudeControl: add get for angle bf errors
2015-04-16 13:29:52 +09:00
Leonard Hall
88be3d67e7
AP_Motors: add get for throttle comp
2015-04-16 13:29:50 +09:00
Leonard Hall
791fbcf9b3
AP_Motors_Class: time constants of throttle comp
2015-04-16 13:29:46 +09:00
Michael du Breuil
04e9141881
AP_TECS: Allow tecs to control throttle during takeoff
2015-04-16 08:56:37 +10:00
Michael du Breuil
a9fc2b8a32
AP_Vehicle: Moved takeoff_throttle_max into plane parameters
2015-04-16 08:56:36 +10:00
Andrew Tridgell
4586de6637
AP_NavEKF: enable optimisation in Linux build
...
only really need debugging for SITL
2015-04-16 08:36:16 +10:00