Peter Barker
484d97597b
GCS_MAVLink: pass mavlink acks into accelcal library if it exists
2018-03-28 09:28:23 +09:00
Peter Barker
9ad058783a
AP_AccelCal: stop using mavlink_snoop for target traffic
2018-03-28 09:28:23 +09:00
Michael du Breuil
050b8ebb32
AP_Motors: Allow specifying which battery is used for compensation
2018-03-27 22:12:21 +01:00
Michael du Breuil
8dd55a85cd
SITL: Create a second voltage to monitor for battery voltages
2018-03-27 22:12:21 +01:00
Michael du Breuil
3f581d0479
AP_Frsky_Telem: Remove unneeded battery failsafe parameters
2018-03-27 22:12:21 +01:00
Michael du Breuil
4a11093ebb
AP_BattMonitor: Support critical and low battery failsafes
...
Also removes the example script, as it was broken, and causing more
headaches then it was worth
2018-03-27 22:12:21 +01:00
Michael du Breuil
98e327640d
AP_Motors: Use battery singleton
2018-03-27 22:12:21 +01:00
Michael du Breuil
c66d15efd7
AP_Compass: Read current for compensation from the battery singleton
2018-03-27 22:12:21 +01:00
Michael du Breuil
97fce557f5
GCS_MAVLink: Support AFS changes
2018-03-27 22:12:21 +01:00
Michael du Breuil
dab13f0e34
AP_AdvancedFailsafe: Allow GCS teriminate to supply a reason cause
2018-03-27 22:12:21 +01:00
priseborough
12fd19ea26
AP_NavEKF2: Clarify definition for gps_glitching flag
2018-03-27 20:28:57 +09:00
priseborough
5785523a0d
AP_NavEKF3: Clarify definition for gps_glitching flag
2018-03-27 20:28:56 +09:00
priseborough
d600a96809
AP_Notify: Clarify definition for gps_glitching flag
2018-03-27 20:28:56 +09:00
priseborough
6a91b294b4
AP_NavEKF: Clarify definition for gps_glitching flag
2018-03-27 20:28:54 +09:00
Peter Barker
08189e0754
SITL: add parameter for Vicon observation delay
2018-03-27 20:28:53 +09:00
Peter Barker
dfcf4788d3
SITL: add vicon-over-mavlink support
2018-03-27 20:28:52 +09:00
Peter Barker
85b41a8abb
AP_HAL_SITL: add vicon-over-mavlink support
2018-03-27 20:28:51 +09:00
Peter Barker
1151d76345
AP_HAL_SITL: sim: namespace for specifying SITL devices from cmdline
2018-03-27 20:28:50 +09:00
Peter Barker
a5a36c04d1
GCS_MAVLink: feed vision position data into AHRS
2018-03-27 20:28:49 +09:00
Paul Riseborough
c680b931dc
AP_NavEKF2: Enable fusion of external nav position data
2018-03-27 20:28:42 +09:00
Peter Barker
aae4ed2553
AP_AHRS_NavEKF: accept external position estimates into AHRS
2018-03-27 20:28:00 +09:00
Peter Barker
20412dc0db
AP_AHRS: accept external position estimates into AHRS
2018-03-27 20:27:59 +09:00
Peter Barker
0d77cfb6c3
SITL: method to return current vehicle location
2018-03-27 20:13:03 +09:00
Peter Barker
c343a286c5
AP_Math: quaternion: add contructor from float[4]
2018-03-27 20:13:03 +09:00
Randy Mackay
b2eeceb82d
AP_RSSI: add PH2 ADC to ANA_PIN param values
2018-03-27 14:20:57 +09:00
bnsgeyer
690e8fd3f4
AP_Motors: TradHeli - Changed RSC mode 3 to a spline fit throttle curve
2018-03-27 09:07:03 +11:00
bnsgeyer
600e0dac92
AP_Math: added support for cubic spline interpolation
2018-03-27 09:07:03 +11:00
Peter Barker
ca907a5078
AP_Notify: correct parameter documentation
...
This is causing parameter parsing to fail at the moment
2018-03-26 10:52:48 +09:00
Peter Barker
96d7eb6bed
DataFlash: handle log sending as part of periodic function
2018-03-26 09:22:47 +09:00
Andrew Tridgell
c311599e0a
HAL_ChibiOS: make DEFAULT_PARAMETERS relative to source root
2018-03-24 16:12:10 +11:00
ChristopherOlson
c39a802655
SRV_Channel:Servo Library - set allowable min value to 500 pwm uS
...
Mostly for helicopter and airplane that may be using 760uS centered servos
2018-03-24 09:52:28 +09:00
kozinalexey
5df2b1a3ac
chibios hal config for F4BY
2018-03-24 06:39:09 +11:00
Peter Barker
ed5140307a
GCS_MAVLink: move handling of visual odometry messages up
2018-03-23 09:28:07 +09:00
Peter Barker
2efd9341cd
AP_HAL_ChibiOS: copy the common linker script to outdir, use it from there
...
The directory we write the linker script to might not have the correct relative path to reference this common.ld script. So make it reference common.ld in the current directory and copy common.ld to the output directory
2018-03-23 11:06:24 +11:00
Andrew Tridgell
e02f753b01
AP_Notify: removed unused code
2018-03-23 09:36:31 +11:00
night-ghost
64c2e691f8
full system status on 2 LEDs + buzzer pin as parameter
2018-03-23 09:36:31 +11:00
Peter Barker
0a08bba437
GCS_MAVLink: eliminate AP_HAL::Print and AP_HAL::Stream
2018-03-23 08:12:38 +11:00
Peter Barker
6c7c916c78
AP_HAL: eliminate AP_HAL::Print and AP_HAL::Stream
...
Just *way* too many layers involved here
2018-03-23 08:12:38 +11:00
night-ghost
b54ac274f5
HAL_F4Light: added Revolution_SD board to rebuild script
2018-03-23 07:48:40 +11:00
night-ghost
d3bd5a5fb8
HAL_F4Light: Revolution_SD now works! Pinout in board's 1_read_me.md
...
also increased reliability of work with SD card on another boards
2018-03-23 07:48:40 +11:00
night-ghost
de9932f6e0
HAL_F4Light: latest fixes
2018-03-23 07:48:40 +11:00
night-ghost
b9dd569edd
HAL_F4Light: added support for DataFlash chips large than 128MBit
2018-03-23 07:48:40 +11:00
night-ghost
04dedd77d7
HAL_F4light: fixed 'instant reboot' modes
2018-03-23 07:48:40 +11:00
night-ghost
a3ebb5c069
HAL_F4Light: added support scripts for binaries with bootloader, fixed non-BL versions
2018-03-23 07:48:40 +11:00
Lucas De Marchi
cf3a9cddc8
AP_HAL_Linux: fix build error with flexible array
...
Apparently this code came in part from libuavcan that defines this
struct Control. They also had the same issue detailed on
https://github.com/UAVCAN/libuavcan/issues/116 .
The solution here is much simpler though: stick to the design of cmsg()
even if it's C. As per cmsg(3), use a union together with CMSG_SPACE().
2018-03-22 00:49:58 -07:00
Peter Barker
d5c57d949b
AP_Scheduler: eliminate goto update_spare_ticks
2018-03-22 10:01:45 +11:00
Peter Barker
badfde6f18
AP_Scheduler: use continue instead of nested-if (NFC)
2018-03-22 10:01:45 +11:00
Peter Barker
224ea50260
AP_Scheduler: continue in place of nested if (NFC)
2018-03-22 10:01:45 +11:00
Michael du Breuil
6652dd73e4
GCS_MAVLink: Correct sending SCALED_PRESSURE.press_diff
...
Closes #6642
2018-03-21 13:36:35 +00:00
Michael du Breuil
a46c60f4de
AP_Airspeed: Create a singleton
2018-03-21 13:36:35 +00:00