standalone #1
|
@ -5,6 +5,7 @@ RUN apt-get update && apt-get install -y \
|
|||
vim \
|
||||
build-essential \
|
||||
ros-kinetic-mavros \
|
||||
dos2unix \
|
||||
ros-kinetic-mavros-extras \
|
||||
ros-kinetic-mavros-msgs \
|
||||
ros-kinetic-catkin
|
||||
|
@ -20,5 +21,6 @@ ENV CATKIN_SETUP_FILE devel/setup.bash
|
|||
|
||||
RUN apt-get clean
|
||||
COPY ./ros_entrypoint.sh /ros_entrypoint.sh
|
||||
RUN /bin/bash -c "dos2unix /ros_entrypoint.sh"
|
||||
|
||||
HEALTHCHECK --interval=5s --timeout=5s --retries=3 CMD /ros_entrypoint.sh rostopic list
|
15
README.md
15
README.md
|
@ -1,4 +1,19 @@
|
|||
# XbeeMav
|
||||
|
||||
|
||||
## Usage
|
||||
|
||||
To run xbee_mav and ros master as a docker pod, use:
|
||||
- `docker compose -f docker-compose-test-stadalone.yml up --build`
|
||||
|
||||
To run xbee_mav as an exclusive service to flash xbee devices, use:
|
||||
- `docker compose -f docker-compose-flash-device.yml up --build`
|
||||
|
||||
#### Note: The xbee config file is located in:
|
||||
- `/xbeemav/Resources/XBee_Config.xml`.
|
||||
#### This setup assumes the xbee is attached to `/dev/ttyUSB0` and programmed to work at a baud rate of `230400`.
|
||||
|
||||
|
||||
## Description
|
||||
|
||||
The "xbee_ros_node" package provides many tools (ROS nodes) to configure, test and communicate Xbee devices.
|
||||
|
|
|
@ -0,0 +1,12 @@
|
|||
version: "3.8"
|
||||
|
||||
services:
|
||||
xbee-mav:
|
||||
command: rosrun xbee_ros_node xbee_config /dev/ttyUSB0 230400
|
||||
build:
|
||||
context: .
|
||||
dockerfile: Dockerfile
|
||||
devices:
|
||||
- /dev/ttyUSB0:/dev/ttyUSB0
|
||||
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
version: "3.8"
|
||||
|
||||
|
||||
|
||||
services:
|
||||
|
||||
ros-master:
|
||||
image: git.spirirobotics.com/spiri/services-ros1-core:main
|
||||
command: stdbuf -o L roscore
|
||||
environment:
|
||||
- "ROS_MASTER_URI=http://ros-master:11311"
|
||||
restart: always
|
||||
ports:
|
||||
- "11311:11311"
|
||||
deploy:
|
||||
resources:
|
||||
limits:
|
||||
memory: 1G
|
||||
# Madness, setting a low ulimit here fixes memory leaks
|
||||
# https://answers.ros.org/question/336963/rosout-high-memory-usage/
|
||||
ulimits:
|
||||
nofile:
|
||||
soft: 1024
|
||||
hard: 524288
|
||||
networks:
|
||||
- sim_network
|
||||
|
||||
xbee-mav:
|
||||
# command: rosrun xbee_ros_node xbee_config /dev/ttyUSB0 230400
|
||||
command: tail -f /dev/null
|
||||
depends_on:
|
||||
- ros-master
|
||||
build:
|
||||
context: .
|
||||
dockerfile: Dockerfile
|
||||
devices:
|
||||
- /dev/ttyUSB0:/dev/ttyUSB0
|
||||
environment:
|
||||
- "ROS_MASTER_URI=http://ros-master:11311"
|
||||
networks:
|
||||
- sim_network
|
||||
|
||||
networks:
|
||||
sim_network:
|
||||
driver: bridge
|
|
@ -2,9 +2,9 @@
|
|||
|
||||
<XBeeConfig>
|
||||
<Settings>
|
||||
<Parameter Command="CM" Description="Channel Mask">00FFFFFFFFFFF7FFFF</Parameter>
|
||||
<Parameter Command="CM" Description="Channel Mask">00FFFFFFFFFFFFFFFF</Parameter>
|
||||
<Parameter Command="HP" Description="Preamble ID">1</Parameter>
|
||||
<Parameter Command="ID" Description="Network ID">5FFF</Parameter>
|
||||
<Parameter Command="ID" Description="Network ID">7777</Parameter>
|
||||
<Parameter Command="MT" Description="Broadcast Multi-Transmits">0</Parameter>
|
||||
<Parameter Command="PL" Description="TX Power Level">4</Parameter>
|
||||
<Parameter Command="RR" Description="Unicast Retries">A</Parameter>
|
||||
|
@ -16,10 +16,10 @@
|
|||
<Parameter Command="DH" Description="Destination Address High">0</Parameter>
|
||||
<Parameter Command="DL" Description="Destination Address Low">FFFF</Parameter>
|
||||
<Parameter Command="TO" Description="Transmit Options">C0</Parameter>
|
||||
<Parameter Command="NI" Description="Node Identifier">'Node 1'</Parameter>
|
||||
<Parameter Command="NI" Description="Node Identifier">Router</Parameter>
|
||||
<Parameter Command="NT" Description="Network Dsicovery Back-Off">82</Parameter>
|
||||
<Parameter Command="NO" Description="Network Dsicovery Options">0</Parameter>
|
||||
<Parameter Command="CI" Description="Cluster ID">11</Parameter>
|
||||
<Parameter Command="CI" Description="Cluster ID">1</Parameter>
|
||||
<Parameter Command="EE" Description="Encryption Enbale">0</Parameter>
|
||||
<Parameter Command="KY" Description="Encryption Key"></Parameter>
|
||||
<Parameter Command="BD" Description="Baud Rate">8</Parameter>
|
||||
|
@ -46,7 +46,7 @@
|
|||
<Parameter Command="P4" Description="DIO14/DIN">1</Parameter>
|
||||
<Parameter Command="PD" Description="Pull Direction">7FFF</Parameter>
|
||||
<Parameter Command="PR" Description="Pull-Up/Down Resistor">7FFF</Parameter>
|
||||
<Parameter Command="M0" Description=" PWM0 Duty Cycle">0</Parameter>
|
||||
<Parameter Command="M0" Description="PWM0 Duty Cycle">0</Parameter>
|
||||
<Parameter Command="M1" Description="PWM1 Duty Cycle">0</Parameter>
|
||||
<Parameter Command="LT" Description="Associate LED Blink Time">0</Parameter>
|
||||
<Parameter Command="RP" Description="RSSI PWM Timer">28</Parameter>
|
||||
|
@ -56,7 +56,7 @@
|
|||
<Parameter Command="IR" Description="Sample Rate">0</Parameter>
|
||||
<Parameter Command="SM" Description="Sleep Mode">0</Parameter>
|
||||
<Parameter Command="SO" Description="Sleep Options">2</Parameter>
|
||||
<Parameter Command="SN" Description="Nu,ber of Cycles between On/Sleep">1</Parameter>
|
||||
<Parameter Command="SN" Description="Number of Cycles between On/Sleep">1</Parameter>
|
||||
<Parameter Command="SP" Description="Sleep Time">12C</Parameter>
|
||||
<Parameter Command="ST" Description="Wake Time">BB8</Parameter>
|
||||
<Parameter Command="WH" Description="Wake Host Delay">0</Parameter>
|
||||
|
|
|
@ -5,5 +5,7 @@
|
|||
<Device Address= "1" >0013A20041C4FEAB</Device>
|
||||
<Device Address= "2" >0013A20041C4FC1C</Device>
|
||||
<Device Address= "3" >0013A20041C4FC97</Device>
|
||||
<Device Address= "4" >0013A20041C4FF68</Device>
|
||||
<Device Address= "5" >0013A20041C4FC42</Device>
|
||||
</Addresses>
|
||||
|
||||
|
|
|
@ -13,58 +13,41 @@ bool setupXBee(const std::string &device_port, const unsigned int baud_rate) {
|
|||
XBeeModule xbee_module;
|
||||
XMLConfigParser config_parser;
|
||||
|
||||
if (xbee_module.Init_Port(device_port, baud_rate)) {
|
||||
// Init port at specified baud rate
|
||||
if (!xbee_module.Init_Port(device_port, baud_rate)) {
|
||||
std::cout << "XBee Configuration Failed. Could not Init_Port." << std::endl;
|
||||
return false;
|
||||
}
|
||||
|
||||
// Run xbee flashing process in a separate thread
|
||||
std::thread th_service(&XBeeModule::Run_Service, &xbee_module);
|
||||
|
||||
while (!xbee_module.Is_Connected() &&
|
||||
!xbee_module.Check_Time_Out_Exceeded()) {
|
||||
// Wait till connection to device is established
|
||||
while (!xbee_module.Is_Connected() && !xbee_module.Check_Time_Out_Exceeded()) {
|
||||
continue;
|
||||
}
|
||||
|
||||
if (xbee_module.Is_Connected()) {
|
||||
std::cout << "Connected to XBee." << std::endl;
|
||||
std::cout << "Loading Config File..." << std::endl;
|
||||
// Load external config file
|
||||
if (!config_parser.Load_Config()) {
|
||||
std::cout << "XBee Configuration Failed. Could not config file." << std::endl;
|
||||
return false;
|
||||
}
|
||||
|
||||
if (config_parser.Load_Config()) {
|
||||
std::cout << "Config Loaded Successfully." << std::endl;
|
||||
std::cout << "Transferring Data..." << std::endl;
|
||||
std::vector<XBee_Parameter_S> *config_parameters =
|
||||
config_parser.Get_Loaded_Parameters();
|
||||
|
||||
for (std::size_t i = 0; i < config_parameters->size(); i++) {
|
||||
std::string current_command;
|
||||
xbee_module.Format_AT_Command(config_parameters->at(i),
|
||||
¤t_command);
|
||||
// Flash config params to device
|
||||
std::cout << "Connected to XBee. Flashing Config File..." << std::endl;
|
||||
std::vector<XBee_Parameter_S> *config_parameters = config_parser.Get_Loaded_Parameters();
|
||||
for (auto& param : *config_parameters) {
|
||||
std::string current_command = "";
|
||||
xbee_module.Format_AT_Command(param, ¤t_command);
|
||||
xbee_module.Send_Data(current_command);
|
||||
}
|
||||
|
||||
std::string write_command = "ATWR \r";
|
||||
xbee_module.Send_Data(write_command);
|
||||
}
|
||||
}
|
||||
|
||||
// Kill service once device has been flashed
|
||||
th_service.join();
|
||||
|
||||
std::cout << "Exiting AT Command Mode..." << std::endl;
|
||||
|
||||
if (xbee_module.Is_Connected())
|
||||
{
|
||||
xbee_module.Exit_AT_Command_Mode();
|
||||
|
||||
if (config_parser.Is_Config_Loaded_Successfully())
|
||||
{
|
||||
std::cout << "XBee Configured Successfully." << std::endl;
|
||||
std::cout << "Flashing process complete." << std::endl;
|
||||
return true;
|
||||
}
|
||||
else
|
||||
{
|
||||
std::cout << "XBee Configuration Failed." << std::endl;
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
std::cout << "XBee Configuration Failed." << std::endl;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
|
|
@ -13,7 +13,7 @@ int main(int argc, char*argv[])
|
|||
{
|
||||
std::string device_port;
|
||||
unsigned int baud_rate = 0;
|
||||
const unsigned int DEFAULT_BAUD_RATE = 9600;
|
||||
const unsigned int DEFAULT_BAUD_RATE = 230400;
|
||||
const std::string DEFAULT_DEVICE_PORT = "/dev/ttyUSB0";
|
||||
|
||||
if (argc < 1)
|
||||
|
@ -26,7 +26,7 @@ int main(int argc, char*argv[])
|
|||
else
|
||||
sscanf(argv[2], "%u", &baud_rate);
|
||||
|
||||
//setupXBee(device_port, baud_rate);
|
||||
setupXBee(device_port, baud_rate);
|
||||
}
|
||||
catch (const std::exception& e)
|
||||
{
|
||||
|
|
Loading…
Reference in New Issue