decoding incomplete input (when the input stream is temporarily exhausted).
codecs.StreamReader now implements buffering, which enables proper
readline support for the UTF-16 decoders. codecs.StreamReader.read()
has a new argument chars which specifies the number of characters to
return. codecs.StreamReader.readline() and codecs.StreamReader.readlines()
have a new argument keepends. Trailing "\n"s will be stripped from the lines
if keepends is false. Added C APIs PyUnicode_DecodeUTF8Stateful and
PyUnicode_DecodeUTF16Stateful.
This checkin is adapted from part 2 (of 3) of Trevor Perrin's patch set.
BACKWARD INCOMPATIBILITY: SHIFT must now be divisible by 5. AFAIK,
nobody will care. long_pow() could be complicated to worm around that,
if necessary.
long_pow():
- BUGFIX: This leaked the base and power when the power was negative
(and so the computation delegated to float pow).
- Instead of doing right-to-left exponentiation, do left-to-right. This
is more efficient for small bases, which is the common case.
- In addition, if the exponent is large (more than FIVEARY_CUTOFF
digits), precompute [a**i % c for i in range(32)], and go left to
right 5 bits at a time.
l_divmod():
- The signature changed so that callers who don't want the quotient,
or don't want the remainder, can pass NULL in the slot they don't
want. This saves them from having to declare a vrbl for unwanted
stuff, and remembering to decref it.
long_mod(), long_div(), long_classic_div():
- Adjust to new l_divmod() signature, and simplified as a result.
This checkin is adapted from part 1 (of 3) of Trevor Perrin's patch set.
x_mul()
- sped a little by optimizing the C
- sped a lot (~2X) if it's doing a square; note that long_pow() squares
often
k_mul()
- more cache-friendly now if it's doing a square
KARATSUBA_CUTOFF
- boosted; gradeschool mult is quicker now, and it may have been too low
for many platforms anyway
KARATSUBA_SQUARE_CUTOFF
- new
- since x_mul is a lot faster at squaring now, the point at which
Karatsuba pays for squaring is much higher than for general mult
Mac-specific modules. Before all modules were compiled but would fail thanks
to a dependence on the code included when Python was built without the compiler
flag.
Closes bug #991962.
This patch includes test cases and documentation updates, as well as NEWS file
updates.
This patch also updates the sre modules so that they don't import the string
module, breaking direct circular imports.
happen in 2.3, but nobody noticed it still was getting generated (the
warning was disabled by default). OverflowWarning and
PyExc_OverflowWarning should be removed for 2.5, and left notes all over
saying so.
truncate() left the stream position unchanged, which meant the
"truncated" data didn't go away:
>>> io.write('abc')
>>> io.truncate(0)
>>> io.write('xyz')
>>> io.getvalue()
'abcxyz'
Patch by Dima Dorfman.
because GNU/k*BSD uses gnu pth to provide pthreads, but will also happen on any
system that does the same.
python fails to build because it doesn't detect gnu pth in pthread
emulation. See C comments in patch for details.
patch taken from http://bugs.debian.org/264315
path, as normalizing the path may alter the meaning of the path if it contains
symlinks.
Also add tests for infinite symlink loops and parent symlinks that need to be
resolved.
reached through a symlink (was comparing path of module to path to function and
were not matching because of the symlink). os.path.realpath() is now used to
solve this discrepency.
Closes bug #570300. Thanks Johannes Gijsbers for the fix.
interning were not clear here -- a subclass could be mutable, for
example -- and had bugs. Explicitly interning a subclass of string
via intern() will raise a TypeError. Internal operations that attempt
to intern a string subclass will have no effect.
Added a few tests to test_builtin that includes the old buggy code and
verifies that calls like PyObject_SetAttr() don't fail. Perhaps these
tests should have gone in test_string.
the tim-doctest-merge-24a2 tag on the the tim-doctest-branch branch.
We did development on the branch in case it wouldn't land in time for
2.4a2, but the branch looked good: Edward's tests passed there, ditto
Python's tests, and ditto the Zope3 tests. Together, those hit doctest
heavily.
modes like non-interactive modes. This allows for non-latin-1 users
to write unicode strings directly and sets Japanese users free from
weird manual escaping <wink> in shift_jis environments.
(Reviewed by Martin v. Loewis)
unicodedata.east_asian_width(). You can still implement your own
simple width() function using it like this:
def width(u):
w = 0
for c in unicodedata.normalize('NFC', u):
cwidth = unicodedata.east_asian_width(c)
if cwidth in ('W', 'F'): w += 2
else: w += 1
return w
or broken by basic ctype functions in 4.4BSD descendants. This
will be fixed in their future development branches but they'll keep
the POSIX-incompatibility for their backward-compatiblities in near
future.
* Fixes an incorrect variable in a PyDict_CheckExact.
* Allow general mapping locals arguments for the execfile() function
and exec statement.
* Add tests.
Major rewrite of the math module docs. Slapped in "radians" where
appropriate; grouped the functions into reasonable categories; supplied
many more words to address common confusions about some of the subtler
issues.
discussed recently in python-dev:
In _locale module:
- bind_textdomain_codeset() binding
In gettext module:
- bind_textdomain_codeset() function
- lgettext(), lngettext(), ldgettext(), ldngettext(),
which return translated strings encoded in
preferred system encoding, if
bind_textdomain_codeset() was not used.
- Added equivalent functionality in translate()
function and catalog classes.
Every change was also documented.
and Thread.__delete() was called after a Thread instance was created. Problem
resulted from a currentThread() call in an 'assert' statement being optimized
out and dummy_thread.get_ident() always returning -1 and thus overwriting the
entry for the _MainThread() instance created in 'threading' at import time.
Closes bug #993394.
__oct__, and __hex__. Raise TypeError if an invalid type is
returned. Note that PyNumber_Int and PyNumber_Long can still
return ints or longs. Fixes SF bug #966618.
and installed layouts to make maintenance simple and easy. And it
also adds four new codecs; big5hkscs, euc-jis-2004, shift-jis-2004
and iso2022-jp-2004.
I don't agree it had a bug (see the report), so this is *not* a candidate
for backporting, but the docs were confusing and the Queue implementation
was old enough to vote.
Rewrote put/put_nowait/get/get_nowait from scratch, to use a pair of
Conditions (not_full and not_empty), sharing a common mutex. The code
is 1/4 the size now, and 6.25x easier to understand. For blocking
with timeout, we also get to reuse (indirectly) the tedious timeout
code from threading.Condition. The Full and Empty exceptions raised
by non-blocking calls are now easy (instead of nearly impossible) to
explain truthfully: Full is raised if and only if the Queue truly
is full when the non-blocking put call checks the queue size, and
similarly for Empty versus non-blocking get.
What I don't know is whether the new implementation is slower (or
faster) than the old one. I don't really care. Anyone who cares
a lot is encouraged to check that.
Anthony Tuininga.
This is a derived patch, taking the opportunity to add some organization
to the now-large pile of datetime-related macros, and to factor out
tedious repeated text.
Also improved some clumsy wording in NEWS.
* Map conditions to related signals.
* Make contexts unhashable.
* Eliminate used "default" attribute in exception definitions.
* Eliminate the _filterfunc in favor of a straight list.
Docs:
* Eliminate documented references to conditions that are not signals.
* Eliminate parenthetical notes such as "1/0 --> Inf" which are no
longer true with the new defaults.
during interpreter shutdown instead of masking it with another traceback about
accessing a NoneType when trying to print the exception out in the first place.
Closes bug #754449 (using patch #954922).
- weakref.ref and weakref.ReferenceType will become aliases for each
other
- weakref.ref will be a modern, new-style class with proper __new__
and __init__ methods
- weakref.WeakValueDictionary will have a lighter memory footprint,
using a new weakref.ref subclass to associate the key with the
value, allowing us to have only a single object of overhead for each
dictionary entry (currently, there are 3 objects of overhead per
entry: a weakref to the value, a weakref to the dictionary, and a
function object used as a weakref callback; the weakref to the
dictionary could be avoided without this change)
- a new macro, PyWeakref_CheckRefExact(), will be added
- PyWeakref_CheckRef() will check for subclasses of weakref.ref
This closes SF patch #983019.
The builtin eval() function now accepts any mapping for the locals argument.
Time sensitive steps guarded by PyDict_CheckExact() to keep from slowing
down the normal case. My timings so no measurable impact.
The LaTeX is untested (well, so is the new API, for that matter).
Note that I also changed NULL to get spelled consistently in concrete.tex.
If that was a wrong thing to do, Fred should yell at me.
New include file timefuncs.h exports private API function
_PyTime_DoubleToTimet() from timemodule.c. timemodule should export
some other functions too (look for painful bits in datetimemodule.c).
Added insane-argument checking to datetime's assorted fromtimestamp()
and utcfromtimestamp() methods. Added insane-argument tests of these
to test_datetime, and insane-argument tests for ctime(), localtime()
and gmtime() to test_time.
iswide() for east asian width manipulation. (Inspired by David
Goodger, Reviewed by Martin v. Loewis)
- Move _PyUnicode_TypeRecord.flags to the end of the struct so that
no padding is added for UCS-4 builds. (Suggested by Martin v. Loewis)
(Code contributed by Jiwon Seo.)
The documentation portion of the patch is being re-worked and will be
checked-in soon. Likewise, PEP 289 will be updated to reflect Guido's
rationale for the design decisions on binding behavior (as described in
in his patch comments and in discussions on python-dev).
The test file, test_genexps.py, is written in doctest format and is
meant to exercise all aspects of the the patch. Further additions are
welcome from everyone. Please stress test this new feature as much as
possible before the alpha release.
close() calls would attempt to free() the buffer already free()ed on
the first close(). [bug introduced with patch #788249]
Making sure that the buffer is free()ed in file object deallocation is
a belt-n-braces bit of insurance against a memory leak.
array.extend() now accepts iterable arguments implements as a series
of appends. Besides being a user convenience and matching the behavior
for lists, this the saves memory and cycles that would be used to
create a temporary array object.
lists. Speeds append() operations and reduces memory requirements
(because of more conservative overallocation).
Paves the way for the feature request for array.extend() to support
arbitrary iterable arguments.
The writelines() method now accepts any iterable argument and writes
the lines one at a time rather than using ''.join(lines) followed by
a single write. Results in considerable memory savings and makes the
method suitable for use with generator expressions.
(Championed by Bob Ippolito.)
The update() method for mappings now accepts all the same argument forms
as the dict() constructor. This includes item lists and/or keyword
arguments.
are within proper boundaries as specified in the docs.
This can break possible code (datetime module needed changing, for instance)
that uses 0 for values that need to be greater 1 or greater (month, day, and
day of year).
Fixes bug #897625.
recent gcc on Linux/x86)
[ 899109 ] 1==float('nan')
by implementing rich comparisons for floats.
Seems to make comparisons involving NaNs somewhat less surprising
when the underlying C compiler actually implements C99 semantics.
to list_init.
* Replaced the code in list_extend with the superior code from list_fill.
* Eliminated list_fill.
Results:
* list.extend() no longer creates an intermediate tuple except to handle
the special case of x.extend(x). The saves memory and time.
* list.extend(x) runs
about the same x is a list or tuple,
a little faster when x is an iterable not defining __len__, and
twice as fast when x is an iterable defining __len__.
* the code is about 15 lines shorter and no longer duplicates
functionality.
The Py2.3 approach overallocated small lists by up to 8 elements.
The last checkin would limited this to one but slowed down (by 20 to 30%)
the creation of small lists between 3 to 8 elements.
This tune-up balances the two, limiting overallocation to 3 elements
(significantly reducing space consumption from Py2.3) and running faster
than the previous checkin.
The first part of the growth pattern (0, 4, 8, 16) neatly meshes with
allocators that trigger data movement only when crossing a power of two
boundary. Also, then even numbers mesh well with common data alignments.
realloc(). This is achieved by tracking the overallocation size in a new
field and using that information to skip calls to realloc() whenever
possible.
* Simplified and tightened the amount of overallocation. For larger lists,
this overallocates by 1/8th (compared to the previous scheme which ranged
between 1/4th to 1/32nd over-allocation). For smaller lists (n<6), the
maximum overallocation is one byte (formerly it could be upto eight bytes).
This saves memory in applications with large numbers of small lists.
* Eliminated the NRESIZE macro in favor of a new, static list_resize function
that encapsulates the resizing logic. Coverting this back to macro would
give a small (under 1%) speed-up. This was too small to warrant the loss
of readability, maintainability, and de-coupling.
* Some functions using NRESIZE had grown unnecessarily complex in their
efforts to bend to the macro's calling pattern. With the new list_resize
function in place, those other functions could be simplified. That is
being saved for a separate patch.
* The ob_item==NULL check could be eliminated from the new list_resize
function. This would entail finding each piece of code that sets ob_item
to NULL and adding a new line to invalidate the overallocation tracking
field. Rather than impose a new requirement on other pieces of list code,
it was preferred to leave the NULL check in place and retain the benefits
of decoupling, maintainability and information hiding (only PyList_New()
and list_sort() need to know about the new field). This approach also
reduces the odds of breaking an extension module.
(Collaborative effort by Raymond Hettinger, Hye-Shik Chang, Tim Peters,
and Armin Rigo.)
which can be reviewed via
http://coding.derkeiler.com/Archive/Python/comp.lang.python/2003-12/1011.html
Duncan Booth investigated, and discovered that an "optimisation" was
in fact a pessimisation for small numbers of elements in a source list,
compared to not having the optimisation, although with large numbers
of elements in the source list the optimisation was quite beneficial.
He posted his change to comp.lang.python (but not to SF).
Further research has confirmed his assessment that the optimisation only
becomes a net win when the source list has more than 100 elements.
I also found that the optimisation could apply to tuples as well,
but the gains only arrive with source tuples larger than about 320
elements and are nowhere near as significant as the gains with lists,
(~95% gain @ 10000 elements for lists, ~20% gain @ 10000 elements for
tuples) so I haven't proceeded with this.
The code as it was applied the optimisation to list subclasses as
well, and this also appears to be a net loss for all reasonable sized
sources (~80-100% for up to 100 elements, ~20% for more than 500
elements; I tested up to 10000 elements).
Duncan also suggested special casing empty lists, which I've extended
to all empty sequences.
On the basis that list_fill() is only ever called with a list for the
result argument, testing for the source being the destination has
now happens before testing source types.
Original idea by Guido van Rossum.
Idea for skipable inner iterators by Raymond Hettinger.
Idea for argument order and identity function default by Alex Martelli.
Implementation by Hye-Shik Chang (with tweaks by Raymond Hettinger).
comments about why both calls to cyclic gc here can cause problems.
I'll backport to 2.3 maint. Since the calls were introduced in 2.3,
that will be the end of it.
and left shifts. (Thanks to Kalle Svensson for SF patch 849227.)
This addresses most of the remaining semantic changes promised by
PEP 237, except for repr() of a long, which still shows the trailing
'L'. The PEP appears to promise warnings for operations that
changed semantics compared to Python 2.3, but this is not
implemented; we've suffered through enough warnings related to
hex/oct literals and I think it's best to be silent now.
by the function object or by the method object, the function
object's attribute usually wins. Christian Tismer pointed out that
that this is really a mistake, because this only happens for special
methods (like __reduce__) where the method object's version is
really more appropriate than the function's attribute. So from now
on, all method attributes will have precedence over function
attributes with the same name.
Also SF patch 843455.
This is a critical bugfix.
I'll backport to 2.3 maint, but not beyond that. The bugs this fixes
have been there since weakrefs were introduced.
* Install the unittests, docs, newsitem, include file, and makefile update.
* Exercise the new functions whereever sets.py was being used.
Includes the docs for libfuncs.tex. Separate docs for the types are
forthcoming.
subtype_dealloc(): This left the dying object exposed to gc, so that
if cyclic gc triggered during the weakref callback, gc tried to delete
the dying object a second time. That's a disaster. subtype_dealloc()
had a (I hope!) unique problem here, as every normal dealloc routine
untracks the object (from gc) before fiddling with weakrefs etc. But
subtype_dealloc has obscure technical reasons for re-registering the
dying object with gc (already explained in a large comment block at
the bottom of the function).
The fix amounts to simply refraining from reregistering the dying object
with gc until after the weakref callback (if any) has been called.
This is a critical bug (hard to predict, and causes seemingly random
memory corruption when it occurs). I'll backport it to 2.3 later.
It works like the pure python verion except:
* it stops storing data after of the iterators gets deallocated
* the data queue is implemented with two stacks instead of one dictionary.
key provides C support for the decorate-sort-undecorate pattern.
reverse provide a stable sort of the list with the comparisions reversed.
* Amended the docs to guarantee sort stability.
* Added C coded getrandbits(k) method that runs in linear time.
* Call the new method from randrange() for ranges >= 2**53.
* Adds a warning for generators not defining getrandbits() whenever they
have a call to randrange() with too large of a population.
If a length-1 Unicode string was in the freelist and it was
uninitialized or pointed to a very large (magnitude) negative number,
the check
unicode_latin1[unicode->str[0]] == unicode
could cause a segmentation violation, e.g. unicode->str[0] is 0xcbcbcbcb.
Fix this in two ways:
1. Change guard befor unicode_latin1[] to test against 256U. If I
understand correctly, the unsigned long used to store UCS4 on my
box was getting converted to a signed long to compare with the
signed constant 256.
2. Change _PyUnicode_New() to make sure the first element of str is
always initialized to zero. There are several places in the code
where the caller can exit with an error before initializing any
of str, which would leave junk in str[0].
Also, silence a compiler warning on pointer vs. int arithmetic.
Bug fix candidate.
Add support for the iterator and mapping protocols.
For Py2.3, this was done for shelve, dumbdbm and other mapping objects, but
not for bsddb and dbhash which were inadvertently missed.
file_truncate(): C doesn't define what fflush(fp) does if fp is open
for update, and the preceding I/O operation on fp was input. On Windows,
fflush() actually changes the current file position then. Because
Windows doesn't support ftruncate() directly, this not only caused
Python's file.truncate() to change the file position (contra our docs),
it also caused the file not to change size.
Repaired by getting the initial file position at the start, restoring
it at the end, and tossing all the complicated micro-efficiency checks
trying to avoid "provably unnecessary" seeks. file.truncate() can't
be a frequent operation, and seeking to the current file position has
got to be cheap anyway.
Bugfix candidate.
* Relaxed the argument restrictions for non-operator methods. They now
allow any iterable instead of requiring a set. This makes the module
a little easier to use and paves the way for an efficient C
implementation which can take better advantage of iterable arguments
while screening out immutables.
* Deprecated Set.update() because it now duplicates Set.union_update()
* Adapted the tests and docs to include the above changes.
* Added more test coverage including testing identities and checking
to make sure non-restartable generators work as arguments.
Will backport to Py2.3.1 so that the interface remains consistent
across versions. The deprecation of update() will be changed to
a FutureWarning.
number. This accounts for the 2 refcount leaks per test_complex run
Michael Hudson discovered (I figured only I would have the stomach to
look for leaks in floating-point code <wink>).
The default seed is time.time().
Multiplied by 256 before truncating so that fractional seconds are used.
This way, two successive calls to random.seed() are much more likely
to produce different sequences.
The fix is confined to the Windows installer.
Not a bugfix candidate: the need for the new -n switch added here was
introduced by moving to the idlefork IDLE (so this change isn't needed
or helpful before 2.3).
arbitrary bytes before the actual zip compatible archive. Zipfiles
containing comments at the end of the file are still not supported.
Add a testcase to test_zipimport, and update NEWS.
This closes sf #775637 and sf #669036.
are satisfied in a case-insensitive manner, the attempt to import (the
non-existent) fcntl gets satisfied by FCNTL.py instead, and the tempfile
module defines a Unix-specific _set_cloexec() function in that case. As
a result, temp files can't be created then (blows up with an AttributeError
trying to reference fcntl.fcntl). This just popped up in the spambayes
project, where there is no apparent workaround (which is why I'm pushing
this in now).
New Plan (releases to be made off the head, ongoing random 2.4 stuff
to be done on a short-lived branch, provided anyone is motivated enough
to create one).
skip over functions with private names (as indicated by the underscore
naming convention). The old default created too much of a risk that
user tests were being skipped inadvertently. Note, this change could
break code in the unlikely case that someone had intentionally put
failing tests in the docstrings of private functions. The breakage
is easily fixable by specifying the old behavior when calling testmod()
or Tester(). The more likely case is that the silent failure was
unintended and that the user needed to be informed so the test could be
fixed.
Related to SF patch 723231 (which pointed out the problem, but didn't
fix it, just shut up the warning msg -- which was pointing out a dead-
serious bug!).
Bugfix candidate.
behavior, creating many threads very quickly. A long debugging session
revealed that the Windows implementation of PyThread_start_new_thread()
was choked with "laziness" errors:
1. It checked MS _beginthread() for a failure return, but when that
happened it returned heap trash as the function result, instead of
an id of -1 (the proper error-return value).
2. It didn't consider that the Win32 CreateSemaphore() can fail.
3. When creating a great many threads very quickly, it's quite possible
that any particular bootstrap call can take virtually any amount of
time to return. But the code waited for a maximum of 5 seconds, and
didn't check to see whether the semaphore it was waiting for got
signaled. If it in fact timed out, the function could again return
heap trash as the function result. This is actually what confused
the test program, as the heap trash usually turned out to be 0, and
then multiple threads all got id 0 simultaneously, confusing the
hell out of threading.py's _active dict (mapping id to thread
object). A variety of baffling behaviors followed from that.
WRT #1 and #2, error returns are checked now, and "thread.error: can't
start new thread" gets raised now if a new thread (or new semaphore)
can't be created. WRT #3, we now wait for the semaphore without a
timeout.
Also removed useless local vrbls, folded long lines, and changed callobj
to a stack auto (it was going thru malloc/free instead, for no discernible
reason).
Bugfix candidate.
I won't have time to write real docs, but spent a lot of time adding
comments to his code and fleshing out the exported functions' docstrings.
There's probably opportunity to consolidate how docstrings get extracted
too, and the new code for that is probably better than the old code for
that (which strained mightily to recover from 2.2's new class/type
gimmicks).
SF bug #760703: SocketHandler and LogRecord don't work well together
SF bug #757821: logging module docs
Applied Vinay Sajip's patch with a few minor fixups and a NEWS item.
Patched __init__.py - added new function
makeLogRecord (for bug report 760703).
Patched handlers.py - updated some docstrings and
deleted some old commented-out code.
Patched test_logging.py to make use of makeLogRecord.
Patched liblogging.tex to fill documentation gaps (both
760703 and bug 757821).
now accepts "True" when a test expects "1", and similarly for "False"
versus "0". This is un-doctest-like, but on balance makes it much
more pleasant to write doctests that pass under 2.2 and 2.3. I expect
it to go away again, when 2.2 is forgotten. In the meantime, there's
a new doctest module constant that can be passed to a new optional
argument, if you want to turn this behavior off.
Note that this substitution is very simple-minded: the expected and
actual outputs have to consist of single tokens. No attempt is made,
e.g., to accept [True, False] when a test expects [1, 0]. This is a
simple hack for simple tests, and I intend to keep it that way.
fix the hangs on Win98SE when starting IDLE via "python" from a DOS box,
but did appear to make them harder to provoke. I closed that bug report
as being hopeless (and if someone wants to open it again, don't dare
assign it to me again <0.1 wink>).
have to insert it in front of other classes, nor do dirty tricks like
inserting a "dummy" HTTPHandler after a ProxyHandler when building an
opener with proxy support.
Python-Dev. Fixed typos in test comments. Added some trivial new test
guts to show the parallelism (now) among __delitem__, __setitem__ and
__getitem__ wrt error conditions.
Still a bugfix candidate for 2.2.3 final, but waiting for Fred to get a
chance to chime in.
Someone review this, please! Final releases are getting close, Fred
(the weakref guy) won't be around until Tuesday, and the pre-patch
code can indeed raise spurious RuntimeErrors in the presence of
threads or mutating comparison functions.
See the bug report for my confusions: I can't see any reason for why
__delitem__ iterated over the keys. The new one-liner implementation
is much faster, can't raise RuntimeError, and should be better-behaved
in all respects wrt threads.
New tests test_weak_keyed_bad_delitem and
test_weak_keyed_cascading_deletes fail before this patch.
Bugfix candidate for 2.2.3 too, if someone else agrees with this patch.
float_pow(): Don't let the platform pow() raise -1.0 to an integer power
anymore; at least glibc gets it wrong in some cases. Note that
math.pow() will continue to deliver wrong (but platform-native) results
in such cases.
tp_free is NULL or PyObject_Del at the end. Because it's a base type
it must call tp_free in its dealloc function, and because it's gc'able
it must not call PyObject_Del.
inherit_slots(): Don't inherit tp_free unless the type and its base
agree about whether they're gc'able. If the type is gc'able and the
base is not, and the base uses the default PyObject_Del for its
tp_free, give the type PyObject_GC_Del for its tp_free (the appropriate
default for a gc'able type).
cPickle.c: The Pickler and Unpickler types claim to be base classes
and gc'able, but their dealloc functions didn't call tp_free.
Repaired that. Also call PyType_Ready() on these typeobjects, so
that the correct (PyObject_GC_Del) default memory-freeing function
gets plugged into these types' tp_free slots.
one good use: a subclass adding a method to express the duration as
a number of hours (or minutes, or whatever else you want to add). The
native breakdown into days+seconds+us is often clumsy. Incidentally
moved a large chunk of object-initialization code closer to the top of
the file, to avoid worse forward-reference trickery.
- When redirecting, always use GET. This is common practice and
more-or-less sanctioned by the HTTP standard.
- Add a handler for 307 redirection, which becomes an error for POST,
but a regular redirect for GET and HEAD.
After removing that, two testers on machines where C: is not the system
drive reported that the installer suggested their system drive instead
of C:, and that's what they wanted it to do.
Reverted a Py2.3b1 change to iterator in subclasses of list and tuple.
They had been changed to use __getitem__ whenever it had been overriden
in the subclass.
This caused some usabilty and performance problems. Also, it was
inconsistent with the rest of python where many container methods
access the underlying object directly without first checking for
an overridden getter. Users needing a change in iterator behavior
should override it directly.
- The socket module now provides the functions inet_pton and inet_ntop
for converting between string and packed representation of IP addresses.
See SF patch #658327.
This still needs a bit of work in the doc area, because it is not
available on all platforms (especially not on Windows).
Raymond Hettinger
Martin v. Löwis
Tim Peters
Skip Montanaro
Walter Dörwald
Brett Cannon
Anthony Baxter
Andrew M. Kuchling
Johannes Gijsbers
Dave Cole
Barry Warsaw
Neal Norwitz
Hye-Shik Chang
Matthias Klose
Michael W. Hudson
Jeremy Hylton
Marc-André Lemburg
Fred Drake
Greg Ward
Gustavo Niemeyer
Neil Schemenauer
Jim Fulton
Guido van Rossum
Thomas Heller
Andrew MacIntyre
Nicholas Bastin
Just van Rossum
Armin Rigo
Alex Martelli
Jack Jansen