When running 'make regen-cases' just to check whether anything changed,
it's annoying that even if nothing changes, the output files are touched,
causing an expensiv rebuild of _bootstrap_python and anything it creates.
So use consistently for all output files.
- Tweak uops debugging output
- Fix the bug from gh-106290
- Rename `SET_IP` to `SAVE_IP` (per https://github.com/faster-cpython/ideas/issues/558)
- Add a `SAVE_IP` uop at the start of the trace (ditto)
- Allow `unbound_local_error`; this gives us uops for `LOAD_FAST_CHECK`, `LOAD_CLOSURE`, and `DELETE_FAST`
- Longer traces
- Support `STORE_FAST_LOAD_FAST`, `STORE_FAST_STORE_FAST`
- Add deps on pycore_uops.h to Makefile(.pre.in)
Remove the following functions from the C API, move them to the internal C
API: add a new pycore_modsupport.h internal header file:
* PyModule_CreateInitialized()
* _PyArg_NoKwnames()
* _Py_VaBuildStack()
No longer export these functions.
* Remove private _PyTraceMalloc C API functions: move them to the
internal C API.
* Don't export most of these functions anymore, but still export
_PyTraceMalloc_GetTraceback() used by tests.
* Rename Include/tracemalloc.h to Include/cpython/tracemalloc.h
Remove the "cpython/pytime.h" header file: it only contained private
functions. Move functions to the internal pycore_time.h header file.
Move tests from _testcapi to _testinternalcapi. Rename also test
methods to have the same name than tested C functions.
No longer export these functions:
* _PyTime_Add()
* _PyTime_As100Nanoseconds()
* _PyTime_FromMicrosecondsClamp()
* _PyTime_FromTimespec()
* _PyTime_FromTimeval()
* _PyTime_GetPerfCounterWithInfo()
* _PyTime_MulDiv()
Remove the following private functions of the C API:
* _PyCodecInfo_GetIncrementalDecoder()
* _PyCodecInfo_GetIncrementalEncoder()
* _PyCodec_DecodeText()
* _PyCodec_EncodeText()
* _PyCodec_Forget()
* _PyCodec_Lookup()
* _PyCodec_LookupTextEncoding()
Move these functions to a new pycore_codecs.h internal header file.
These functions are no longer exported.
Added a new, experimental, tracing optimizer and interpreter (a.k.a. "tier 2"). This currently pessimizes, so don't use yet -- this is infrastructure so we can experiment with optimizing passes. To enable it, pass ``-Xuops`` or set ``PYTHONUOPS=1``. To get debug output, set ``PYTHONUOPSDEBUG=N`` where ``N`` is a debug level (0-4, where 0 is no debug output and 4 is excessively verbose).
All of this code is likely to change dramatically before the 3.13 feature freeze. But this is a first step.
This ensures that `commoninstall` is completed before `bininstall` is
started when parallel builds are used (`make -j install`), and so the
`python3` symlink is only installed after all standard library modules
are installed.
Co-authored-by: Zachary Ware <zachary.ware@gmail.com>
The _xxsubinterpreters module was meant to only use public API. Some internal C-API usage snuck in over the last few years (e.g. gh-28969). This fixes that.
Remove functions in the C API:
* PyEval_AcquireLock()
* PyEval_ReleaseLock()
* PyEval_InitThreads()
* PyEval_ThreadsInitialized()
But keep these functions in the stable ABI.
Mention "make regen-limited-abi" in "make regen-all".
* Remove the Lib/test/imghdrdata/ directory.
* Copy 5 pictures (gif, png, ppm, pgm, xbm) from removed
Lib/test/imghdrdata/ to a new Lib/test/tkinterdata/ directory.
* Update Sphinx from 4.5 to 6.2 in Doc/requirements.txt.
* socket_helper.transient_internet() no longer imports nntplib to
catch nntplib.NNTPTemporaryError.
* ssltests.py no longer runs test_nntplib.
* "make quicktest" no longer runs test_nntplib.
* WASM: remove nntplib from OMIT_NETWORKING_FILES.
* Remove mentions to nntplib in the email documentation.
Apply BOLT optimizations to libpython for shared builds. Most of the C
code is in libpython so it is critical to apply BOLT there fully realize
BOLT benefits.
This change also reworks how BOLT instrumentation is applied. It
effectively removes the readelf based logic added in gh-101525 and
replaces it with a mechanism that saves a copy of the pre-bolt binary
and restores that copy when necessary. This allows us to perform BOLT
optimizations without having to manually delete the output binary to
force a new bolt run.
Also:
- add a clean-bolt target for purging BOLT files and hook that up to the
clean target
- .gitignore BOLT related files
Before and after this refactor, `make` will no-op after a previous run.
Both versions should also share common make DAG deficiencies where
targets fail to trigger as often as they need to or can trigger
prematurely in certain scenarios. e.g. after this change you may need to
`rm profile-bolt-stamp` to force a BOLT run because there aren't
appropriate non-phony targets for BOLT's make target to depend on.
To make it easier to iterate on custom BOLT settings, the flags to pass
to instrumentation and application are now defined in configure and can
be overridden by passing BOLT_INSTRUMENT_FLAGS and BOLT_APPLY_FLAGS.
This implements PEP 695, Type Parameter Syntax. It adds support for:
- Generic functions (def func[T](): ...)
- Generic classes (class X[T](): ...)
- Type aliases (type X = ...)
- New scoping when the new syntax is used within a class body
- Compiler and interpreter changes to support the new syntax and scoping rules
Co-authored-by: Marc Mueller <30130371+cdce8p@users.noreply.github.com>
Co-authored-by: Eric Traut <eric@traut.com>
Co-authored-by: Larry Hastings <larry@hastings.org>
Co-authored-by: Alex Waygood <Alex.Waygood@Gmail.com>
By convention make targets that don't refer to a file have a dependency
on the fake .PHONY target/file. This ensures that these targets are
always evaluated because there is no rule to create a .PHONY file
and that will force make to think the rule is out of date and needs
to be rebuilt.
This commit consistently associates virtual targets with .PHONY by
declaring the .PHONY dependency immediately above the make rule. This
should avoid race conditions and avoidable rebuilds across multiple make
invocations.
Replaces our built-in SHA3 implementation with a verified one from the HACL* project.
This implementation is used when OpenSSL does not provide SHA3 or is not present.
3.11 shiped with a very slow tiny sha3 implementation to get off of the <=3.10 reference implementation that wound up having serious bugs. This brings us back to a reasonably performing built-in implementation consistent with what we've just replaced our other guaranteed available standard hash algorithms with: code from the HACL* project.
---------
Co-authored-by: Gregory P. Smith <greg@krypto.org>
Deep-frozen code objects are cannot be shared (currently) by
interpreters, due to how adaptive specialization can modify the
bytecodes. We work around this by only using the deep-frozen objects in
the main interpreter. This does incur a performance penalty for
subinterpreters, which we may be able to resolve later.
This avoids conflicting with the shebang of the called scripts as well
as avoiding hard errors on platforms where the called script runs a
failing unchecked command in the usual course of checking since
`SHELL=/bin/sh -e` as of a90863c.
Fixes gh-103776.
* The majority of the monitoring code is in instrumentation.c
* The new instrumentation bytecodes are in bytecodes.c
* legacy_tracing.c adapts the new API to the old sys.setrace and sys.setprofile APIs
Set `SHELL = /bin/sh -e` to ensure that complex recipes fail on the first error rather than incorrectly reporting success.
Co-authored-by: Zachary Ware <zach@python.org>
The function is like Py_AtExit() but for a single interpreter. This is a companion to the atexit module's register() function, taking a C callback instead of a Python one.
We also update the _xxinterpchannels module to use _Py_AtExit(), which is the motivating case. (This is inspired by pain points felt while working on gh-101660.)
The essentially eliminates the global variable, with the associated benefits. This is also a precursor to isolating this bit of state to PyInterpreterState.
Folks that currently read _Py_RefTotal directly would have to start using _Py_GetGlobalRefTotal() instead.
https://github.com/python/cpython/issues/102304
This behavior is optional, because in some extreme cases it
may just make debugging harder. The tool defaults it to off,
but it is on in Makefile.pre.in.
Also note that this makes diffs to generated_cases.c.h noisier,
since whenever you insert or delete a line in bytecodes.c,
all subsequent #line directives will change.
This will keep us from adding new unsupported (i.e. non-const) C global variables, which would break interpreter isolation.
FYI, historically it is very uncommon for new global variables to get added. Furthermore, it is rare for new code to break the c-analyzer. So the check should almost always pass unnoticed.
Note that I've removed test_check_c_globals. A test wasn't a great fit conceptually and was super slow on debug builds. A CI check is a better fit.
This also resolves gh-100237.
https://github.com/python/cpython/issues/81057
This merges their code. They're backed by the same single HACL* static library, having them be a single module simplifies maintenance.
This should unbreak the wasm enscripten builds that currently fail due to linking in --whole-archive mode and the HACL* library appearing twice.
Long unnoticed error fixed: _sha512.SHA384Type was doubly assigned and was actually SHA512Type. Nobody depends on those internal names.
Also rename LIBHACL_ make vars to LIBHACL_SHA2_ in preperation for other future HACL things.
This builds HACL* as a library in one place.
A followup to #101707 which broke some WASM builds. This fixes 2/4 of them, but the enscripten toolchain in the others don't deduplicate linker arguments and error out. A follow-on PR will address those.
Replace the builtin hashlib implementations of SHA2-384 and SHA2-512
originally from LibTomCrypt with formally verified, side-channel resistant
code from the [HACL*](https://github.com/hacl-star/hacl-star/) project.
The builtins remain a fallback only used when OpenSSL does not provide them.
* Write output and metadata in a single run
This halves the time to run the cases generator
(most of the time goes into parsing the input).
* Declare or define opcode metadata based on NEED_OPCODE_TABLES
* Use generated metadata for stack_effect()
* compile.o depends on opcode_metadata.h
* Return -1 from _PyOpcode_num_popped/pushed for unknown opcode
Fix creating install directories in `make sharedinstall` if they exist already outside `DESTDIR`. The previous make rules assumed that the directories would be created via a dependency on a rule for `$(DESTSHARED)` that did not fire if the directory did exist outside `$(DESTDIR)`.
While technically `$(DESTDIR)` could be prepended to the rule name, moving the rules for creating directories straight into the `sharedinstall` rule seems to fit the common practices better. Since the rule explicitly checks whether the individual directories exist anyway, there seems to be no reason to rely on make determining that implicitly as well.
replacing hashlib primitives (for the non-OpenSSL case) with verified implementations from HACL*. This is the first PR in the series, and focuses specifically on SHA2-256 and SHA2-224.
This PR imports Hacl_Streaming_SHA2 into the Python tree. This is the HACL* implementation of SHA2, which combines a core implementation of SHA2 along with a layer of buffer management that allows updating the digest with any number of bytes. This supersedes the previous implementation in the tree.
@franziskuskiefer was kind enough to benchmark the changes: in addition to being verified (thus providing significant safety and security improvements), this implementation also provides a sizeable performance boost!
```
---------------------------------------------------------------
Benchmark Time CPU Iterations
---------------------------------------------------------------
Sha2_256_Streaming 3163 ns 3160 ns 219353 // this PR
LibTomCrypt_Sha2_256 5057 ns 5056 ns 136234 // library used by Python currently
```
The changes in this PR are as follows:
- import the subset of HACL* that covers SHA2-256/224 into `Modules/_hacl`
- rewire sha256module.c to use the HACL* implementation
Co-authored-by: Gregory P. Smith [Google LLC] <greg@krypto.org>
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
(These aren't used yet, but may be coming soon,
and it's easier to keep this tool the same between branches.)
Added a sanity check for all this to compile.c.
Co-authored-by: Irit Katriel <iritkatriel@yahoo.com>
Add COMPILEALL_OPTS variable in Makefile to override compileall
options (default: -j0) in "make install". Also merge the compileall
commands into a single command building PYC files for the all
optimization levels (0, 1, 2) at once.
Co-authored-by: Gregory P. Smith <greg@krypto.org>
The global allocators were stored in 3 static global variables: _PyMem_Raw, _PyMem, and _PyObject. State for the "small block" allocator was stored in another 13. That makes a total of 16 global variables. We are moving all 16 to the _PyRuntimeState struct as part of the work for gh-81057. (If PEP 684 is accepted then we will follow up by moving them all to PyInterpreterState.)
https://github.com/python/cpython/issues/81057
We do the following:
* move the generated _PyUnicode_InitStaticStrings() to its own file
* move the generated _PyStaticObjects_CheckRefcnt() to its own file
* include pycore_global_objects.h in extension modules instead of pycore_runtime_init.h
These changes help us avoid including things that aren't needed.
https://github.com/python/cpython/issues/90868
Remove the distutils package. It was deprecated in Python 3.10 by PEP
632 "Deprecate distutils module". For projects still using distutils
and cannot be updated to something else, the setuptools project can
be installed: it still provides distutils.
* Remove Lib/distutils/ directory
* Remove test_distutils
* Remove references to distutils
* Skip test_check_c_globals and test_peg_generator since they use
distutils
This got introduced in commit 5884449539
to determine if readline is already linked against curses or tinfo in
the setup.py, which is no longer present.
The switch cases (really TARGET(opcode) macros) have been moved from ceval.c to generated_cases.c.h. That file is generated from instruction definitions in bytecodes.c (which impersonates a C file so the C code it contains can be edited without custom support in e.g. VS Code).
The code generator lives in Tools/cases_generator (it has a README.md explaining how it works). The DSL used to describe the instructions is a work in progress, described in https://github.com/faster-cpython/ideas/blob/main/3.12/interpreter_definition.md.
This is surely a work-in-progress. An easy next step could be auto-generating super-instructions.
**IMPORTANT: Merge Conflicts**
If you get a merge conflict for instruction implementations in ceval.c, your best bet is to port your changes to bytecodes.c. That file looks almost the same as the original cases, except instead of `TARGET(NAME)` it uses `inst(NAME)`, and the trailing `DISPATCH()` call is omitted (the code generator adds it automatically).
The test failed on a buildbot because the pointer was only 7 hex characters. To be safe,
I bumped it down to 3: 4 in case we have 32-bit platforms, and 3 in case the pointer is very small.
Relevant tests moved from test_exceptions to test_traceback to be able to
compare both implementations.
Co-authored-by: Carl Friedrich Bolz-Tereick <cfbolz@gmx.de>
⚠️⚠️ Note for reviewers, hackers and fellow systems/low-level/compiler engineers ⚠️⚠️
If you have a lot of experience with this kind of shenanigans and want to improve the **first** version, **please make a PR against my branch** or **reach out by email** or **suggest code changes directly on GitHub**.
If you have any **refinements or optimizations** please, wait until the first version is merged before starting hacking or proposing those so we can keep this PR productive.
- support EMSDK tot-upstream and git releases
- allow WASM assents for wasm64-emscripten and WASI. This makes single file distributions on WASI easier.
- decouple WASM assets from browser builds
* Add support for the BOLT post-link binary optimizer
Using [bolt](https://github.com/llvm/llvm-project/tree/main/bolt)
provides a fairly large speedup without any code or functionality
changes. It provides roughly a 1% speedup on pyperformance, and a
4% improvement on the Pyston web macrobenchmarks.
It is gated behind an `--enable-bolt` configure arg because not all
toolchains and environments are supported. It has been tested on a
Linux x86_64 toolchain, using llvm-bolt built from the LLVM 14.0.6
sources (their binary distribution of this version did not include bolt).
Compared to [a previous attempt](https://github.com/faster-cpython/ideas/issues/224),
this commit uses bolt's preferred "instrumentation" approach, as well as adds some non-PIE
flags which enable much better optimizations from bolt.
The effects of this change are a bit more dependent on CPU microarchitecture
than other changes, since it optimizes i-cache behavior which seems
to be a bit more variable between architectures. The 1%/4% numbers
were collected on an Intel Skylake CPU, and on an AMD Zen 3 CPU I
got a slightly larger speedup (2%/4%), and on a c6i.xlarge EC2 instance
I got a slightly lower speedup (1%/3%).
The low speedup on pyperformance is not entirely unexpected, because
BOLT improves i-cache behavior, and the benchmarks in the pyperformance
suite are small and tend to fit in i-cache.
This change uses the existing pgo profiling task (`python -m test --pgo`),
though I was able to measure about a 1% macrobenchmark improvement by
using the macrobenchmarks as the training task. I personally think that
both the PGO and BOLT tasks should be updated to use macrobenchmarks,
but for the sake of splitting up the work this PR uses the existing pgo task.
* Simplify the build flags
* Add a NEWS entry
* Update Makefile.pre.in
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
* Update configure.ac
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
* Add myself to ACKS
* Add docs
* Other review comments
* fix tab/space issue
* Make it more clear that --enable-bolt is experimental
* Add link to bolt's github page
Co-authored-by: Dong-hee Na <donghee.na92@gmail.com>
We only statically initialize for core code and builtin modules. Extension modules still create
the tuple at runtime. We'll solve that part of interpreter isolation separately.
This change includes generated code. The non-generated changes are in:
* Tools/clinic/clinic.py
* Python/getargs.c
* Include/cpython/modsupport.h
* Makefile.pre.in (re-generate global strings after running clinic)
* very minor tweaks to Modules/_codecsmodule.c and Python/Python-tokenize.c
All other changes are generated code (clinic, global strings).
Remove the "configure --with-cxx-main" build option: it didn't work
for many years. Remove the MAINCC variable from configure and
Makefile.
The MAINCC variable was added by the issue gh-42471: commit
0f48d98b74. Previously, --with-cxx-main
was named --with-cxx.
Keep CXX and LDCXXSHARED variables, even if they are no longer used
by Python build system.
* gh-95218: Move tests for importlib.resources into test_importlib.resources.
* Also update makefile
* Include test_importlib/resources in code ownership rule.
The `_testcapimodule.c` file is getting too large to work with effectively.
This PR lays out a general structure of how tests can be split up, with more splitting to come later if the structure is OK.
Vectorcall tests aren't the biggest issue -- it's just an area I want to work on next, so I'm starting here.
An issue specific to vectorcall tests is that it wasn't clear that e.g. `MethodDescriptor2` is related to testing vectorcall: the `/* Test PEP 590 */` section had an ambiguous end. Separate file should make things like this much clearer.
OTOH, for some pieces it might not be clear where they should be -- I left `meth_fastcall` with tests of the other calling conventions. IMO, even with the ambiguity it's still worth it to split the huge file up.
I'm not sure about the buildsystem changes, hopefully CI will tell me what's wrong.
@vstinner, @markshannon: Do you think this is a good idea?
Automerge-Triggered-By: GH:encukou
Add script ``Tools/scripts/check_modules.py`` to check and validate builtin
and shared extension modules. The script also handles ``Modules/Setup`` and
will eventually replace ``setup.py``.
Co-authored-by: Victor Stinner <vstinner@python.org>
Co-authored-by: Erlend Egeberg Aasland <erlend.aasland@protonmail.com>
It makes it easier to look for module states in sysconfig without
special casing suffixes "_CFLAGS", "_DEPS", "_LDFLAGS", "_OBJS",
and "CTYPES_MALLOC_CLOSURE".
* Move Lib/tkinter/test/test_tkinter/ to Lib/test/test_tkinter/.
* Move Lib/tkinter/test/test_ttk/ to Lib/test/test_ttk/.
* Add Lib/test/test_ttk/__init__.py based on test_ttk_guionly.py.
* Add Lib/test/test_tkinter/__init__.py
* Remove old Lib/test/test_tk.py.
* Remove old Lib/test/test_ttk_guionly.py.
* Add __main__ sub-modules.
* Update imports and update references to rename files.
* Move Lib/lib2to3/tests/ to Lib/test/test_lib2to3/.
* Remove Lib/test/test_lib2to3.py.
* Update imports.
* all_project_files(): use different paths and sort files
to make the tests more reproducible.
* Update references to tests.
Move the follow functions and type from frameobject.h to pyframe.h,
so the standard <Python.h> provide frame getter functions:
* PyFrame_Check()
* PyFrame_GetBack()
* PyFrame_GetBuiltins()
* PyFrame_GetGenerator()
* PyFrame_GetGlobals()
* PyFrame_GetLasti()
* PyFrame_GetLocals()
* PyFrame_Type
Remove #include "frameobject.h" from many C files. It's no longer
needed.
All install targets use the "all" target as synchronization point to
prevent race conditions with PGO builds. PGO builds use recursive make,
which can lead to two parallel `./python setup.py build` processes that
step on each others toes.
"test" targets now correctly compile PGO build in a clean repo.
Remove the token.h header file. There was never any public tokenizer
C API. The token.h header file was only designed to be used by Python
internals.
Move Include/token.h to Include/internal/pycore_token.h. Including
this header file now requires that the Py_BUILD_CORE macro is
defined. It no longer checks for the Py_LIMITED_API macro.
Rename functions:
* PyToken_OneChar() => _PyToken_OneChar()
* PyToken_TwoChars() => _PyToken_TwoChars()
* PyToken_ThreeChars() => _PyToken_ThreeChars()
`HOSTRUNNER` is a program which can be used to run `BUILDPYTHON` for the host platform (for example, `python.js` requires `node`).
Also change depedencies from `build_all` to `all` so that targets which can't build everything (e.g. WASM) can still run `buildbottest` and `pythoninfo`.
cc @tiran
Move the following API from Include/opcode.h (public C API) to a new
Include/internal/pycore_opcode.h header file (internal C API):
* EXTRA_CASES
* _PyOpcode_Caches
* _PyOpcode_Deopt
* _PyOpcode_Jump
* _PyOpcode_OpName
* _PyOpcode_RelativeJump
Fix signal.NSIG value on FreeBSD to accept signal numbers greater
than 32, like signal.SIGRTMIN and signal.SIGRTMAX.
* Add Py_NSIG constant.
* Add pycore_signal.h internal header file.
* _Py_Sigset_Converter() now includes the range of valid signals in
the error message.
- drop unnecessary ``=1`` suffix from Emscripten flags
- drop unnecessary ``-sWASM`` flag for side modules
- rename ``build_platform`` to ``build_wasm``. I introduced the target
for WASM builds a couple of months ago.
- fix ``--enable-test-modules`` for browser builds
* Move the code for generating Modules/_sre/sre_constants.h from
Lib/re/_constants.py into a separate script
Tools/scripts/generate_sre_constants.py.
* Add target `regen-sre` in the makefile.
* Make target `regen-all` depending on `regen-sre`.
Remove the Include/code.h header file. C extensions should only
include the main <Python.h> header file.
Python.h includes directly Include/cpython/code.h instead.
The side effect of this bug was that venv environments directly
used the main interpreter instead of the intermediate stub executable,
which can cause problems when a script uses system APIs that
require the use of an application bundle.
This effectively reverts the Makefile change in gh-31637. I've added some notes so it is more clear what is going on.
We also update the "Check if generated files are up to date" job to run "make regen-deepfreeze" to ensure "make regen-global-objects" catches deepfreeze.c.
https://bugs.python.org/issue47146
- Remove ``--with-tclk-*`` options from `configure`
- Use pkg-config to detect `_tkinter` dependencies (Tcl/Tk, X11)
- Manual override via environment variables `TCLTK_CFLAGS` and `TCLTK_LIBS`
We have to run "make regen-deepfreeze" before running Tools/scripts/generate-global-objects.py; otherwise we will miss any changes to global objects in deep-frozen modules (which aren't committed in the repo). However, building $(PYTHON_FOR_FREEZE) fails if one of its source files had a global object (e.g. via _Py_ID(...)) added or removed, without generate-global-objects.py running first. So "make regen-global-objects" would sometimes fail.
We solve this by running generate-global-objects.py before *and* after "make regen-deepfreeze". To speed things up and cut down on noise, we also avoid updating the global objects files if there are no changes to them.
https://bugs.python.org/issue46712
- Add requires_fork and requires_subprocess to more tests
- Skip extension import tests if dlopen is not available
- Don't assume that _testcapi is a shared extension
- Skip a lot of socket tests that don't work on Emscripten
- Skip mmap tests, mmap emulation is incomplete
- venv does not work yet
- Cannot get libc from executable
The "entire" test suite is now passing on Emscripten with EMSDK from git head (91 suites are skipped).
Move forward declarations of Python C API types to a new pytypedefs.h
header file to solve interdependency issues between header files.
pytypedefs.h contains forward declarations of the following types:
* PyCodeObject
* PyFrameObject
* PyGetSetDef
* PyInterpreterState
* PyLongObject
* PyMemberDef
* PyMethodDef
* PyModuleDef
* PyObject
* PyThreadState
* PyTypeObject
Rename Include/buffer.h header file to Include/pybuffer.h to avoid
conflicts with projects having an existing "buffer.h" header file.
* Incude pybuffer.h before object.h in Python.h.
* Remove #include "buffer.h" from Include/cpython/object.h.
* Add a forward declaration of the PyObject type in pybuffer.h to fix
an inter-dependency issue.
We're no longer using _Py_IDENTIFIER() (or _Py_static_string()) in any core CPython code. It is still used in a number of non-builtin stdlib modules.
The replacement is: PyUnicodeObject (not pointer) fields under _PyRuntimeState, statically initialized as part of _PyRuntime. A new _Py_GET_GLOBAL_IDENTIFIER() macro facilitates lookup of the fields (along with _Py_GET_GLOBAL_STRING() for non-identifier strings).
https://bugs.python.org/issue46541#msg411799 explains the rationale for this change.
The core of the change is in:
* (new) Include/internal/pycore_global_strings.h - the declarations for the global strings, along with the macros
* Include/internal/pycore_runtime_init.h - added the static initializers for the global strings
* Include/internal/pycore_global_objects.h - where the struct in pycore_global_strings.h is hooked into _PyRuntimeState
* Tools/scripts/generate_global_objects.py - added generation of the global string declarations and static initializers
I've also added a --check flag to generate_global_objects.py (along with make check-global-objects) to check for unused global strings. That check is added to the PR CI config.
The remainder of this change updates the core code to use _Py_GET_GLOBAL_IDENTIFIER() instead of _Py_IDENTIFIER() and the related _Py*Id functions (likewise for _Py_GET_GLOBAL_STRING() instead of _Py_static_string()). This includes adding a few functions where there wasn't already an alternative to _Py*Id(), replacing the _Py_Identifier * parameter with PyObject *.
The following are not changed (yet):
* stop using _Py_IDENTIFIER() in the stdlib modules
* (maybe) get rid of _Py_IDENTIFIER(), etc. entirely -- this may not be doable as at least one package on PyPI using this (private) API
* (maybe) intern the strings during runtime init
https://bugs.python.org/issue46541
This change is a prerequisite for generating code for other global objects (like strings in gh-30928).
(We borrowed some code from Tools/scripts/deepfreeze.py.)
https://bugs.python.org/issue46541
When Python is built without --enable-shared, the "python" program is
now linked to object files, rather than being linked to the Python
library (libpython.a), to make sure that all symbols are exported.
Previously, the linker omitted some symbols like the Py_FrozenMain()
function.
When Python is configured with --without-static-libpython, the Python
static library (libpython.a) is no longer built.
* Check --without-static-libpython earlier in configure.ac
* Add LINK_PYTHON_OBJS and LINK_PYTHON_DEPS variables to Makefile.
* test_capi now ensures that the "Py_FrozenMain" symbol is exported.
The array of small PyLong objects has been statically declared. Here I also statically initialize them. Consequently they are no longer initialized dynamically during runtime init.
I've also moved them under a new sub-struct in _PyRuntimeState, in preparation for static allocation and initialization of other global objects.
https://bugs.python.org/issue45953
This change is strictly renames and moving code around. It helps in the following ways:
* ensures type-related init functions focus strictly on one of the three aspects (state, objects, types)
* passes in PyInterpreterState * to all those functions, simplifying work on moving types/objects/state to the interpreter
* consistent naming conventions help make what's going on more clear
* keeping API related to a type in the corresponding header file makes it more obvious where to look for it
https://bugs.python.org/issue46008
* Check NS API return values for NULL to prevent segfault in
``_bootstrap_python``.
* Set modPathInitialized to 1 so the ``decode_to_dict`` path is used.
Signed-off-by: Christian Heimes <christian@python.org>
The build system now uses a :program:`_bootstrap_python` interpreter for
freezing and deepfreezing again. To speed up build process the build tools
:program:`_bootstrap_python` and :program:`_freeze_module` are no longer
build with LTO.
Cross building depends on a build Python interpreter, which must have same
version and bytecode as target host Python.
The getpath.py file is frozen at build time and executed as code over a namespace. It is never imported, nor is it meant to be importable or reusable. However, it should be easier to read, modify, and patch than the previous code.
This commit attempts to preserve every previously tested quirk, but these may be changed in the future to better align platforms.
The presence of frozen module headers in srcdir interfers with OOT
build. Make considers headers in srcdir up to date, but later builds do
not use VPATH to locate files. make clean now removes the headers, too.
Also remove stale ``_bootstrap_python`` from .gitignore.
Instead we use $(PYTHON_FOR_REGEN) .../deepfreeze.py with the
frozen .h file as input, as we did for Windows in bpo-45850.
We also get rid of the code that generates the .h files
when make regen-frozen is run (i.e., .../make_frozen.py),
and the MANIFEST file.
Restore Python 3.8 and 3.9 as Windows host Python again
Co-authored-by: Kumar Aditya <59607654+kumaraditya303@users.noreply.github.com>
* Make internal APIs that take PyFrameConstructor take a PyFunctionObject instead.
* Add reference to function to frame, borrow references to builtins and globals.
* Add COPY_FREE_VARS instruction to allow specialization of calls to inner functions.
Jason R. Coombs
Guido van Rossum
Irit Katriel
Victor Stinner
Jeffery To
Eric Snow
Mark Shannon
Erlend E. Aasland
Jonathan Protzenko
Gregory Szorc
Jelle Zijlstra
Carl Meyer
Zachary Ware
Dong-hee Na
Michał Górny
Jacob Bower
Gregory P. Smith
Kai Zhang
Christian Heimes
Miro Hrončok
Brandt Bucher
serge-sans-paille
Brett Cannon
Pablo Galindo Salgado
Łukasz Langa
Skip Montanaro
Kevin Modzelewski
Aivars Kalvāns
Petr Viktorin
Kumar Aditya
Dennis Sweeney
Ken Jin
Inada Naoki
Ethan Smith
Serhiy Storchaka
Ronald Oussoren
Hood Chatham
Erlend Egeberg Aasland
Dominic Davis-Foster
Kumar Aditya
Steve Dower
Neil Schemenauer