This makes the Tier 2 interpreter a little faster.
I calculated by about 3%,
though I hesitate to claim an exact number.
This starts by doubling the trace size limit (to 512),
making it more likely that loops fit in a trace.
The rest of the approach is to only load
`oparg` and `operand` in cases that use them.
The code generator know when these are used.
For `oparg`, it will conditionally emit
```
oparg = CURRENT_OPARG();
```
at the top of the case block.
(The `oparg` variable may be referenced multiple times
by the instructions code block, so it must be in a variable.)
For `operand`, it will use `CURRENT_OPERAND()` directly
instead of referencing the `operand` variable,
which no longer exists.
(There is only one place where this will be used.)
This uses the new mechanism whereby certain uops
are replaced by others during translation,
using the `_PyUop_Replacements` table.
We further special-case the `_FOR_ITER_TIER_TWO` uop
to update the deoptimization target to point
just past the corresponding `END_FOR` opcode.
Two tiny code cleanups are also part of this PR.
- Ensure that `assert(type_version != 0);` always comes *before* using `type_version`
Also:
- In cases_generator, rename `-v` to from `--verbose` to `--viable`
- Double max trace size to 256
- Add a dependency on executor_cases.c.h for ceval.o
- Mark `_SPECIALIZE_UNPACK_SEQUENCE` as `TIER_ONE_ONLY`
- Add debug output back showing the optimized trace
- Bunch of cleanups to Tools/cases_generator/
* Replace jumps with deopts in tier 2
* Fewer special cases of uop names
* Add target field to uop IR
* Remove more redundant SET_IP and _CHECK_VALIDITY micro-ops
* Extend whitelist of non-escaping API functions.
_PyDict_Pop_KnownHash(): remove the default value and the return type
becomes an int.
Co-authored-by: Stefan Behnel <stefan_ml@behnel.de>
Co-authored-by: Antoine Pitrou <pitrou@free.fr>
In PGO mode, this function caused a compiler error in MSVC.
It turns out that optimizing for space only save the day, and is even faster.
However, without PGO, this is neither necessary nor slower.
Critical sections are helpers to replace the global interpreter lock
with finer grained locking. They provide similar guarantees to the GIL
and avoid the deadlock risk that plain locking involves. Critical
sections are implicitly ended whenever the GIL would be released. They
are resumed when the GIL would be acquired. Nested critical sections
behave as if the sections were interleaved.
* Revert "gh-111089: Use PyUnicode_AsUTF8() in Argument Clinic (#111585)"
This reverts commit d9b606b3d0.
* Revert "gh-111089: Use PyUnicode_AsUTF8() in getargs.c (#111620)"
This reverts commit cde1071b2a.
* Revert "gh-111089: PyUnicode_AsUTF8() now raises on embedded NUL (#111091)"
This reverts commit d731579bfb.
* Revert "gh-111089: Add PyUnicode_AsUTF8() to the limited C API (#111121)"
This reverts commit d8f32be5b6.
* Revert "gh-111089: Use PyUnicode_AsUTF8() in sqlite3 (#111122)"
This reverts commit 37e4e20eaa.
I added _Py_excinfo to the internal API (and added its functions in Python/errors.c) in gh-111530 (9322ce9). Since then I've had a nagging sense that I should have added the type and functions in its own PR. While I do plan on using _Py_excinfo outside crossinterp.c very soon (see gh-111572/gh-111573), I'd still feel more comfortable if the _Py_excinfo stuff went in as its own PR. Hence, here we are.
(FWIW, I may combine that with gh-111572, which I may, in turn, combine with gh-111573. We'll see.)
Joining a thread now ensures the underlying OS thread has exited. This is required for safer fork() in multi-threaded processes.
---------
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
Replace most of calls of _PyErr_WriteUnraisableMsg() and some
calls of PyErr_WriteUnraisable(NULL) with PyErr_FormatUnraisable().
Co-authored-by: Victor Stinner <vstinner@python.org>
This moves several general internal APIs out of _xxsubinterpretersmodule.c and into the new Python/crossinterp.c (and the corresponding internal headers).
Specifically:
* _Py_excinfo, etc.: the initial implementation for non-object exception snapshots (in pycore_pyerrors.h and Python/errors.c)
* _PyXI_exception_info, etc.: helpers for passing an exception beween interpreters (wraps _Py_excinfo)
* _PyXI_namespace, etc.: helpers for copying a dict of attrs between interpreters
* _PyXI_Enter(), _PyXI_Exit(): functions that abstract out the transitions between one interpreter and a second that will do some work temporarily
Again, these were all abstracted out of _xxsubinterpretersmodule.c as generalizations. I plan on proposing these as public API at some point.
- There is no longer a separate Python/executor.c file.
- Conventions in Python/bytecodes.c are slightly different -- don't use `goto error`,
you must use `GOTO_ERROR(error)` (same for others like `unused_local_error`).
- The `TIER_ONE` and `TIER_TWO` symbols are only valid in the generated (.c.h) files.
- In Lib/test/support/__init__.py, `Py_C_RECURSION_LIMIT` is imported from `_testcapi`.
- On Windows, in debug mode, stack allocation grows from 8MiB to 12MiB.
- **Beware!** This changes the env vars to enable uops and their debugging
to `PYTHON_UOPS` and `PYTHON_LLTRACE`.
Replace PyUnicode_AsUTF8AndSize() with PyUnicode_AsUTF8() to remove
the explicit check for embedded null characters.
The change avoids to have to include explicitly <string.h> to get the
strlen() function when using a recent version of the limited C API.
This is partly to clear this stuff out of pystate.c, but also in preparation for moving some code out of _xxsubinterpretersmodule.c. This change also moves this stuff to the internal API (new: Include/internal/pycore_crossinterp.h). @vstinner did this previously and I undid it. Now I'm re-doing it. :/
* gh-106320: Re-add _PyLong_FromByteArray(), _PyLong_AsByteArray() and _PyLong_GCD() to the public header files since they are used by third-party packages and there is no efficient replacement.
See https://github.com/python/cpython/issues/111140
See https://github.com/python/cpython/issues/111139
* gh-111262: Re-add _PyDict_Pop() to have a C-API until a new public one is designed.
There were a few things I did in gh-110565 that need to be fixed. I also forgot to add tests in that PR.
(Note that this PR exposes a refleak introduced by gh-110246. I'll take care of that separately.)
Move the following private functions and structures to
pycore_modsupport.h internal C API:
* _PyArg_BadArgument()
* _PyArg_CheckPositional()
* _PyArg_NoKeywords()
* _PyArg_NoPositional()
* _PyArg_ParseStack()
* _PyArg_ParseStackAndKeywords()
* _PyArg_Parser structure
* _PyArg_UnpackKeywords()
* _PyArg_UnpackKeywordsWithVararg()
* _PyArg_UnpackStack()
* _Py_ANY_VARARGS()
Changes:
* Python/getargs.h now includes pycore_modsupport.h to export
functions.
* clinic.py now adds pycore_modsupport.h when one of these functions
is used.
* Add pycore_modsupport.h includes when a C extension uses one of
these functions.
* Define Py_BUILD_CORE_MODULE in C extensions which now include
directly or indirectly (via code generated by Argument Clinic)
pycore_modsupport.h:
* _csv
* _curses_panel
* _dbm
* _gdbm
* _multiprocessing.posixshmem
* _sqlite.row
* _statistics
* grp
* resource
* syslog
* _testcapi: bad_get() no longer uses METH_FASTCALL calling
convention but METH_VARARGS. Replace _PyArg_UnpackStack() with
PyArg_ParseTuple().
* _testcapi: add PYTESTCAPI_NEED_INTERNAL_API macro which is defined
by _testcapi sub-modules which need the internal C API
(pycore_modsupport.h): exceptions.c, float.c, vectorcall.c,
watchers.c.
* Remove Include/cpython/modsupport.h header file.
Include/modsupport.h no longer includes the removed header file.
* Fix mypy clinic.py
It already mostly worked, except in the case when invalid keyword
argument with non-ASCII name was passed to function with non-ASCII
parameter names. Then it crashed in the debug mode.
* The lexer, which include the actual lexeme producing logic, goes into
the `lexer` directory.
* The wrappers, one wrapper per input mode (file, string, utf-8, and
readline), go into the `tokenizer` directory and include logic for
creating a lexer instance and managing the buffer for different modes.
---------
Co-authored-by: Pablo Galindo <pablogsal@gmail.com>
Co-authored-by: blurb-it[bot] <43283697+blurb-it[bot]@users.noreply.github.com>
The docs state that the space, tab, colon, and comma characters are
ignored in Py_BuildValue() format strings.
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
Add wrapper for timerfd_create, timerfd_settime, and timerfd_gettime to os module.
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
Co-authored-by: Adam Turner <9087854+AA-Turner@users.noreply.github.com>
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
Co-authored-by: Victor Stinner <vstinner@python.org>
sys.audit() now has assertions to check that the event argument is
not NULL and that the format argument does not use the "N" format.
Add tests on PySys_AuditTuple().
This adds a new field 'state' to PyThreadState that can take on one of three values: _Py_THREAD_ATTACHED, _Py_THREAD_DETACHED, or _Py_THREAD_GC. The "attached" and "detached" states correspond closely to acquiring and releasing the GIL. The "gc" state is current unused, but will be used to implement stop-the-world GC for --disable-gil builds in the near future.
We do the following:
* add a per-interpreter XID registry (PyInterpreterState.xidregistry)
* put heap types there (keep static types in _PyRuntimeState.xidregistry)
* clear the registries during interpreter/runtime finalization
* avoid duplicate entries in the registry (when _PyCrossInterpreterData_RegisterClass() is called more than once for a type)
* use Py_TYPE() instead of PyObject_Type() in _PyCrossInterpreterData_Lookup()
The per-interpreter registry helps preserve isolation between interpreters. This is important when heap types are registered, which is something we haven't been doing yet but I will likely do soon.
In Python/bytecodes.c, you now write
```
DEOPT_IF(condition);
```
The code generator expands this to
```
DEOPT_IF(condition, opcode);
```
where `opcode` is the name of the unspecialized instruction.
This works inside macro expansions too.
**CAVEAT:** The entire `DEOPT_IF(condition)` statement must be on a single line.
If it isn't, the substitution will fail; an error will be printed by the code generator
and the C compiler will report some errors.
Add PyThreadState_GetUnchecked() function: similar to
PyThreadState_Get(), but don't issue a fatal error if it is NULL. The
caller is responsible to check if the result is NULL. Previously,
this function was private and known as _PyThreadState_UncheckedGet().
In a few places we switch to another interpreter without knowing if it has a thread state associated with the current thread. For the main interpreter there wasn't much of a problem, but for subinterpreters we were *mostly* okay re-using the tstate created with the interpreter (located via PyInterpreterState_ThreadHead()). There was a good chance that tstate wasn't actually in use by another thread.
However, there are no guarantees of that. Furthermore, re-using an already used tstate is currently fragile. To address this, now we create a new thread state in each of those places and use it.
One consequence of this change is that PyInterpreterState_ThreadHead() may not return NULL (though that won't happen for the main interpreter).
The existence of background threads running on a subinterpreter was preventing interpreters from getting properly destroyed, as well as impacting the ability to run the interpreter again. It also affected how we wait for non-daemon threads to finish.
We add PyInterpreterState.threads.main, with some internal C-API functions.
This change makes sure sys.path[0] is set properly for subinterpreters. Before, it wasn't getting set at all. This PR does not address the broader concerns from gh-109853.
* Remove unused <locale.h> includes.
* Remove unused <fcntl.h> include in traceback.h.
* Remove redundant <assert.h> and <stddef.h> includes. They are already
included by "Python.h".
* Remove <object.h> include in faulthandler.c. Python.h already includes it.
* Add missing <stdbool.h> in pycore_pythread.h if HAVE_PTHREAD_STUBS
is defined.
* Fix also warnings in pthread_stubs.h: don't redefine macros if they
are already defined, like the __NEED_pthread_t macro.
* pycore_pythread.h is now the central place to make sure that
_POSIX_THREADS and _POSIX_SEMAPHORES macros are defined if
available.
* Make sure that pycore_pythread.h is included when _POSIX_THREADS
and _POSIX_SEMAPHORES macros are tested.
* PY_TIMEOUT_MAX is now defined as a constant, since its value
depends on _POSIX_THREADS, instead of being defined as a macro.
* Prevent integer overflow in the preprocessor when computing
PY_TIMEOUT_MAX_VALUE on Windows:
replace "0xFFFFFFFELL * 1000 < LLONG_MAX"
with "0xFFFFFFFELL < LLONG_MAX / 1000".
* Document the change and give hints how to fix affected code.
* Add an exception for PY_TIMEOUT_MAX name to smelly.py
* Add PY_TIMEOUT_MAX to the stable ABI
These are the most popular specializations of `LOAD_ATTR` and `STORE_ATTR`
that weren't already viable uops:
* Split LOAD_ATTR_METHOD_WITH_VALUES
* Split LOAD_ATTR_METHOD_NO_DICT
* Split LOAD_ATTR_SLOT
* Split STORE_ATTR_SLOT
* Split STORE_ATTR_INSTANCE_VALUE
Also:
* Add `-v` flag to code generator which prints a list of non-viable uops
(easter-egg: it can print execution counts -- see source)
* Double _Py_UOP_MAX_TRACE_LENGTH to 128
I had dropped one of the DEOPT_IF() calls! :-(
PyImport_GetImporter() now sets RuntimeError if it fails to get sys.path_hooks
or sys.path_importer_cache or they are not list and dict correspondingly.
Previously it could return NULL without setting error in obscure cases,
crash or raise SystemError if these attributes have wrong type.
PyMutex is a one byte lock with fast, inlineable lock and unlock functions for the common uncontended case. The design is based on WebKit's WTF::Lock.
PyMutex is built using the _PyParkingLot APIs, which provides a cross-platform futex-like API (based on WebKit's WTF::ParkingLot). This internal API will be used for building other synchronization primitives used to implement PEP 703, such as one-time initialization and events.
This also includes tests and a mini benchmark in Tools/lockbench/lockbench.py to compare with the existing PyThread_type_lock.
Uncontended acquisition + release:
* Linux (x86-64): PyMutex: 11 ns, PyThread_type_lock: 44 ns
* macOS (arm64): PyMutex: 13 ns, PyThread_type_lock: 18 ns
* Windows (x86-64): PyMutex: 13 ns, PyThread_type_lock: 38 ns
PR Overview:
The primary purpose of this PR is to implement PyMutex, but there are a number of support pieces (described below).
* PyMutex: A 1-byte lock that doesn't require memory allocation to initialize and is generally faster than the existing PyThread_type_lock. The API is internal only for now.
* _PyParking_Lot: A futex-like API based on the API of the same name in WebKit. Used to implement PyMutex.
* _PyRawMutex: A word sized lock used to implement _PyParking_Lot.
* PyEvent: A one time event. This was used a bunch in the "nogil" fork and is useful for testing the PyMutex implementation, so I've included it as part of the PR.
* pycore_llist.h: Defines common operations on doubly-linked list. Not strictly necessary (could do the list operations manually), but they come up frequently in the "nogil" fork. ( Similar to https://man.freebsd.org/cgi/man.cgi?queue)
---------
Co-authored-by: Eric Snow <ericsnowcurrently@gmail.com>
There is a WIP proposal to enable webassembly stack switching which have been
implemented in v8:
https://github.com/WebAssembly/js-promise-integration
It is not possible to switch stacks that contain JS frames so the Emscripten JS
trampolines that allow calling functions with the wrong number of arguments
don't work in this case. However, the js-promise-integration proposal requires
the [type reflection for Wasm/JS API](https://github.com/WebAssembly/js-types)
proposal, which allows us to actually count the number of arguments a function
expects.
For better compatibility with stack switching, this PR checks if type reflection
is available, and if so we use a switch block to decide the appropriate
signature. If type reflection is unavailable, we should use the current EMJS
trampoline.
We cache the function argument counts since when I didn't cache them performance
was negatively affected.
Co-authored-by: T. Wouters <thomas@python.org>
Co-authored-by: Brett Cannon <brett@python.org>
I must have overlooked this when refactoring the code generator.
The Tier 1 interpreter contained a few silly things like
```
goto resume_frame;
STACK_SHRINK(1);
```
(and other variations, some where the unconditional `goto` was hidden in a macro).
* Rename SAVE_IP to _SET_IP
* Rename EXIT_TRACE to _EXIT_TRACE
* Rename SAVE_CURRENT_IP to _SAVE_CURRENT_IP
* Rename INSERT to _INSERT (This is for Ken Jin's abstract interpreter)
* Rename IS_NONE to _IS_NONE
* Rename JUMP_TO_TOP to _JUMP_TO_TOP
This adds a 16-bit inline cache entry to the conditional branch instructions POP_JUMP_IF_{FALSE,TRUE,NONE,NOT_NONE} and their instrumented variants, which is used to keep track of the branch direction.
Each time we encounter these instructions we shift the cache entry left by one and set the bottom bit to whether we jumped.
Then when it's time to translate such a branch to Tier 2 uops, we use the bit count from the cache entry to decided whether to continue translating the "didn't jump" branch or the "jumped" branch.
The counter is initialized to a pattern of alternating ones and zeros to avoid bias.
The .pyc file magic number is updated. There's a new test, some fixes for existing tests, and a few miscellaneous cleanups.
Fix _thread.start_new_thread() race condition. If a thread is created
during Python finalization, the newly spawned thread now exits
immediately instead of trying to access freed memory and lead to a
crash.
thread_run() calls PyEval_AcquireThread() which checks if the thread
must exit. The problem was that tstate was dereferenced earlier in
_PyThreadState_Bind() which leads to a crash most of the time.
Move _PyThreadState_CheckConsistency() from thread_run() to
_PyThreadState_Bind().
thread_run() of _threadmodule.c now calls
_PyThreadState_CheckConsistency() to check if tstate is a dangling
pointer when Python is built in debug mode.
Rename ceval_gil.c is_tstate_valid() to
_PyThreadState_CheckConsistency() to reuse it in _threadmodule.c.
Symbols of the C API should be prefixed by "Py_" to avoid conflict
with existing names in 3rd party C extensions on "#include <Python.h>".
test.pythoninfo now logs Py_C_RECURSION_LIMIT constant and other
_testcapi and _testinternalcapi constants.
Statistics gathering is now off by default. Use the "-X pystats"
command line option or set the new PYTHONSTATS environment variable
to 1 to turn statistics gathering on at Python startup.
Statistics are no longer dumped at exit if statistics gathering was
off or statistics have been cleared.
Changes:
* Add PYTHONSTATS environment variable.
* sys._stats_dump() now returns False if statistics are not dumped
because they are all equal to zero.
* Add PyConfig._pystats member.
* Add tests on sys functions and on setting PyConfig._pystats to 1.
* Add Include/cpython/pystats.h and Include/internal/pycore_pystats.h
header files.
* Rename '_py_stats' variable to '_Py_stats'.
* Exclude Include/cpython/pystats.h from the Py_LIMITED_API.
* Move pystats.h include from object.h to Python.h.
* Add _Py_StatsOn() and _Py_StatsOff() functions. Remove
'_py_stats_struct' variable from the API: make it static in
specialize.c.
* Document API in Include/pystats.h and Include/cpython/pystats.h.
* Complete pystats documentation in Doc/using/configure.rst.
* Don't write "all zeros" stats: if _stats_off() and _stats_clear()
or _stats_dump() were called.
* _PyEval_Fini() now always call _Py_PrintSpecializationStats() which
does nothing if stats are all zeros.
Co-authored-by: Michael Droettboom <mdboom@gmail.com>
Move the private _PyErr_WriteUnraisableMsg() functions to the
internal C API (pycore_pyerrors.h).
Move write_unraisable_exc() from _testcapi to _testinternalcapi.
Remove <ctype.h> in C files which don't use it; only sre.c and
_decimal.c still use it.
Remove _PY_PORT_CTYPE_UTF8_ISSUE code from pyport.h:
* Code added by commit b5047fd019
in 2004 for MacOSX and FreeBSD.
* Test removed by commit 52ddaefb6b
in 2007, since Python str type now uses locale independent
functions like Py_ISALPHA() and Py_TOLOWER() and the Unicode
database.
Modules/_sre/sre.c replaces _PY_PORT_CTYPE_UTF8_ISSUE with new
functions: sre_isalnum(), sre_tolower(), sre_toupper().
Remove unused includes:
* _localemodule.c: remove <stdio.h>.
* getargs.c: remove <float.h>.
* dynload_win.c: remove <direct.h>, it no longer calls _getcwd()
since commit fb1f68ed7c (in 2001).
Python.h no longer includes <time.h>, <sys/select.h> and <sys/time.h>
standard header files.
* Add <time.h> include to xxsubtype.c.
* Add <sys/time.h> include to posixmodule.c and semaphore.c.
* readline.c includes <sys/select.h> instead of <sys/time.h>.
* resource.c no longer includes <time.h> and <sys/time.h>.
Replace <ctype.h> locale dependent functions with Python "pyctype.h"
locale independent functions:
* Replace isalpha() with Py_ISALPHA().
* Replace isdigit() with Py_ISDIGIT().
* Replace isxdigit() with Py_ISXDIGIT().
* Replace tolower() with Py_TOLOWER().
Leave Modules/_sre/sre.c unchanged, it uses locale dependent
functions on purpose.
Include explicitly <ctype.h> in _decimal.c to get isascii().
pycore_create_interpreter() now returns a status, rather than
calling Py_FatalError().
* PyInterpreterState_New() now calls Py_ExitStatusException() instead
of calling Py_FatalError() directly.
* Replace Py_FatalError() with PyStatus in init_interpreter() and
_PyObject_InitState().
* _PyErr_SetFromPyStatus() now raises RuntimeError, instead of
ValueError. It can now call PyErr_NoMemory(), raise MemoryError,
if it detects _PyStatus_NO_MEMORY() error message.
Argument Clinic now only includes pycore_gc.h if PyGC_Head is needed,
and only includes pycore_runtime.h if _Py_ID() is needed.
* Add 'condition' optional argument to Clinic.add_include().
* deprecate_keyword_use() includes pycore_runtime.h when using
the _PyID() function.
* Fix rendering of includes: comments start at the column 35.
* Mark PC/clinic/_wmimodule.cpp.h and
"Objects/stringlib/clinic/*.h.h" header files as generated in
.gitattributes.
Effects:
* 42 header files generated by AC no longer include the internal C
API, instead of 4 header files before. For example,
Modules/clinic/_abc.c.h no longer includes the internal C API.
* Fix _testclinic_depr.c.h: it now always includes pycore_runtime.h
to get _Py_ID().
Python built with "configure --with-trace-refs" (tracing references)
is now ABI compatible with Python release build and debug build.
Moreover, it now also supports the Limited API.
Change Py_TRACE_REFS build:
* Remove _PyObject_EXTRA_INIT macro.
* The PyObject structure no longer has two extra members (_ob_prev
and _ob_next).
* Use a hash table (_Py_hashtable_t) to trace references (all
objects): PyInterpreterState.object_state.refchain.
* Py_TRACE_REFS build is now ABI compatible with release build and
debug build.
* Limited C API extensions can now be built with Py_TRACE_REFS:
xxlimited, xxlimited_35, _testclinic_limited.
* No longer rename PyModule_Create2() and PyModule_FromDefAndSpec2()
functions to PyModule_Create2TraceRefs() and
PyModule_FromDefAndSpec2TraceRefs().
* _Py_PrintReferenceAddresses() is now called before
finalize_interp_delete() which deletes the refchain hash table.
* test_tracemalloc find_trace() now also filters by size to ignore
the memory allocated by _PyRefchain_Trace().
Test changes for Py_TRACE_REFS:
* Add test.support.Py_TRACE_REFS constant.
* Add test_sys.test_getobjects() to test sys.getobjects() function.
* test_exceptions skips test_recursion_normalizing_with_no_memory()
and test_memory_error_in_PyErr_PrintEx() if Python is built with
Py_TRACE_REFS.
* test_repl skips test_no_memory().
* test_capi skisp test_set_nomemory().
Move PyUnstable_ExecutableKinds and associated macros from the
internal C API to the public C API.
Rename constants: replace "PY_" prefix with "PyUnstable_" prefix.
This mis-initialization caused the executor optimization to kick in sooner than intended. It also set the lower 4 bits of the counter to `1` -- those bits are supposed to be reserved (the actual counter is in the upper 12 bits).
Also remove NOP instructions.
The "stubs" are not optimized in this fashion (their SAVE_IP should always be preserved since it's where to jump next, and they don't contain NOPs by their nature).
Remove these private functions from the public C API:
* _PyRun_AnyFileObject()
* _PyRun_InteractiveLoopObject()
* _PyRun_SimpleFileObject()
* _Py_SourceAsString()
Move them to the internal C API: add a new pycore_pythonrun.h header
file. No longer export these functions.
* Rename _PyUnstable_GetUnaryIntrinsicName() to
PyUnstable_GetUnaryIntrinsicName()
* Rename _PyUnstable_GetBinaryIntrinsicName()
to PyUnstable_GetBinaryIntrinsicName().
Functions like PyErr_SetFromErrno() and SetFromWindowsErr() should be
called immediately after using the C API which sets errno or the Windows
error code.
Move these private functions to the internal C API
(pycore_abstract.h):
* _Py_convert_optional_to_ssize_t()
* _PyNumber_Index()
Argument Clinic now emits #include "pycore_abstract.h" when these
functions are used.
The parser of the c-analyzer tool now uses a list of files which use
the limited C API, rather than a list of files using the internal C
API.
Instead of using `GO_TO_INSTRUCTION(CALL_PY_EXACT_ARGS)` we just add the macro elements of the latter to the macro for the former. This requires lengthening the uops array in struct opcode_macro_expansion. (It also required changes to stacking.py that were merged already.)
Move private functions to the internal C API (pycore_sysmodule.h):
* _PySys_GetAttr()
* _PySys_GetSizeOf()
No longer export most of these functions.
Fix also a typo in Include/cpython/optimizer.h: add a missing space.
Move private functions to the internal C API (pycore_dict.h):
* _PyDictView_Intersect()
* _PyDictView_New()
* _PyDict_ContainsId()
* _PyDict_DelItemId()
* _PyDict_DelItem_KnownHash()
* _PyDict_GetItemIdWithError()
* _PyDict_GetItem_KnownHash()
* _PyDict_HasSplitTable()
* _PyDict_NewPresized()
* _PyDict_Next()
* _PyDict_Pop()
* _PyDict_SetItemId()
* _PyDict_SetItem_KnownHash()
* _PyDict_SizeOf()
No longer export most of these functions.
Move also the _PyDictViewObject structure to the internal C API.
Move dict_getitem_knownhash() function from _testcapi to the
_testinternalcapi extension. Update test_capi.test_dict for this
change.
I was comparing the last preceding poke with the *last* peek,
rather than the *first* peek.
Unfortunately this bug obscured another bug:
When the last preceding poke is UNUSED, the first peek disappears,
leaving the variable unassigned. This is how I fixed it:
- Rename CopyEffect to CopyItem.
- Change CopyItem to contain StackItems instead of StackEffects.
- Update those StackItems when adjusting the manager higher or lower.
- Assert that those StackItems' offsets are equivalent.
- Other clever things.
---------
Co-authored-by: Irit Katriel <1055913+iritkatriel@users.noreply.github.com>
Remove the internal _PyDict_GetItemStringWithError() function. It can
now be replaced with the new public PyDict_ContainsString() and
PyDict_GetItemStringRef() functions.
getargs.c now now uses a strong reference for current_arg.
find_keyword() returns a strong reference.
Replace _PyDict_GetItemStringWithError() calls with
PyDict_GetItemStringRef() which returns a strong reference to the
item.
Co-authored-by: Serhiy Storchaka <storchaka@gmail.com>
Replace PyDict_GetItem() calls with PyDict_GetItemRef()
or PyDict_GetItemWithError() to handle errors.
* Replace PyLong_AS_LONG() with _PyLong_AsInt()
and check for errors.
* Check for PyDict_Contains() error.
* pycore_init_builtins() checks for _PyType_Lookup() failure.
Remove private _PyDict_GetItemStringWithError() function of the
public C API: the new PyDict_GetItemStringRef() can be used instead.
* Move private _PyDict_GetItemStringWithError() to the internal C API.
* _testcapi get_code_extra_index() uses PyDict_GetItemStringRef().
Avoid using private functions in _testcapi which tests the public C
API.
Such C API functions as PyErr_SetString(), PyErr_Format(),
PyErr_SetFromErrnoWithFilename() and many others no longer crash or
ignore errors if it failed to format the error message or decode the
filename. Instead, they keep a corresponding error.
This finishes the work begun in gh-107760. When, while projecting a superblock, we encounter a call to a short, simple function, the superblock will now enter the function using `_PUSH_FRAME`, continue through it, and leave it using `_POP_FRAME`, and then continue through the original code. Multiple frame pushes and pops are even possible. It is also possible to stop appending to the superblock in the middle of a called function, when running out of space or encountering an unsupported bytecode.
* Split `CALL_PY_EXACT_ARGS` into uops
This is only the first step for doing `CALL` in Tier 2.
The next step involves tracing into the called code object and back.
After that we'll have to do the remaining `CALL` specialization.
Finally we'll have to deal with `KW_NAMES`.
Note: this moves setting `frame->return_offset` directly in front of
`DISPATCH_INLINED()`, to make it easier to move it into `_PUSH_FRAME`.
Mark Shannon
Michael Droettboom
Guido van Rossum
Hugo van Kemenade
Serhiy Storchaka
Sam Gross
Victor Stinner
Brandt Bucher
Irit Katriel
AN Long
Markus Mohrhard
Sergey B Kirpichev
Samuel Thibault
Anthony Shaw
Eric Snow
Antoine Pitrou
Tian Gao
Yilei Yang
Pablo Galindo Salgado
Savannah Ostrowski
Nikita Sobolev
gsallam
scoder
Furkan Onder
Kirill Podoprigora
Donghee Na
Łukasz Langa
Lysandros Nikolaou
Zackery Spytz
denballakh
Masaru Tsuchiyama
Brett Cannon
Carl Meyer
Hood Chatham
Jelle Zijlstra
云line
Ken Jin
Steve Dower
Finn Womack