[ 1327110 ] wrong TypeError traceback in generator expressions
by removing the code that can stomp on the users' TypeError raised by the
iterable argument to ''.join() -- PySequence_Fast (now?) gives a perfectly
reasonable message itself. Also, a couple of tests.
PyUnicode_DecodeCharmap() the accept a unicode string as the mapping
argument which is used as a mapping table.
This code isn't used by any of the codecs yet.
about illegal code points. The codec now supports PEP 293 style error handlers.
(This is a variant of the Nik Haldimann's patch that detects truncated data)
decoding incomplete input (when the input stream is temporarily exhausted).
codecs.StreamReader now implements buffering, which enables proper
readline support for the UTF-16 decoders. codecs.StreamReader.read()
has a new argument chars which specifies the number of characters to
return. codecs.StreamReader.readline() and codecs.StreamReader.readlines()
have a new argument keepends. Trailing "\n"s will be stripped from the lines
if keepends is false. Added C APIs PyUnicode_DecodeUTF8Stateful and
PyUnicode_DecodeUTF16Stateful.
need to convert str objects from the iterable to unicode. So, if
someone set the system default encoding to something nasty enough,
the conversion process could mutate the input iterable as a side
effect, and PySequence_Fast doesn't hide that from us if the input was
a list. IOW, can't assume the size of PySequence_Fast's result is
invariant across PyUnicode_FromObject() calls.
much to reduce the size of the code, but greatly improves its clarity.
It's also quicker in what's probably the most common case (the argument
iterable is a list). Against it, if the iterable isn't a list or a tuple,
a temp tuple is materialized containing the entire input sequence, and
that's a bigger temp memory burden. Yawn.
1. u1.join([u2]) is u2
2. Be more careful about C-level int overflow.
Since PySequence_Fast() isn't needed to achieve #1, it's not used -- but
the code could sure be simpler if it were.
unicodedata.east_asian_width(). You can still implement your own
simple width() function using it like this:
def width(u):
w = 0
for c in unicodedata.normalize('NFC', u):
cwidth = unicodedata.east_asian_width(c)
if cwidth in ('W', 'F'): w += 2
else: w += 1
return w
iswide() for east asian width manipulation. (Inspired by David
Goodger, Reviewed by Martin v. Loewis)
- Move _PyUnicode_TypeRecord.flags to the end of the struct so that
no padding is added for UCS-4 builds. (Suggested by Martin v. Loewis)
and left shifts. (Thanks to Kalle Svensson for SF patch 849227.)
This addresses most of the remaining semantic changes promised by
PEP 237, except for repr() of a long, which still shows the trailing
'L'. The PEP appears to promise warnings for operations that
changed semantics compared to Python 2.3, but this is not
implemented; we've suffered through enough warnings related to
hex/oct literals and I think it's best to be silent now.
charmaptranslate_makespace() allocated more memory than required for the
next replacement but didn't remember that fact, so memory size was growing
exponentially every time a replacement string is longer that one character.
This fixes SF bug #828737.
If a length-1 Unicode string was in the freelist and it was
uninitialized or pointed to a very large (magnitude) negative number,
the check
unicode_latin1[unicode->str[0]] == unicode
could cause a segmentation violation, e.g. unicode->str[0] is 0xcbcbcbcb.
Fix this in two ways:
1. Change guard befor unicode_latin1[] to test against 256U. If I
understand correctly, the unsigned long used to store UCS4 on my
box was getting converted to a signed long to compare with the
signed constant 256.
2. Change _PyUnicode_New() to make sure the first element of str is
always initialized to zero. There are several places in the code
where the caller can exit with an error before initializing any
of str, which would leave junk in str[0].
Also, silence a compiler warning on pointer vs. int arithmetic.
Bug fix candidate.
The unicode_resize() family only returns -1 or 0 so simply checking
for != 0 is sufficient, but somewhat unclear. Many Python API
functions return < 0 on error, reserving the right to return 0 or 1 on
success. Change the call sites for consistency with these calls.
when an encoding error occurs and the callback name is unknown,
i.e. when the callback has to be called. The problem was that
the fact that the callback has already been looked up was only
recorded in a local variable in charmap_encoding_error(), because
charmap_encoding_error() got it's own copy of the errorHandler
pointer instead of a pointer to the pointer in
PyUnicode_EncodeCharmap().
* Doc - add doc for when functions were added
* UserString
* string object methods
* string module functions
'chars' is used for the last parameter everywhere.
These changes will be backported, since part of the changes
have already been made, but they were inconsistent.
error handers in the Unicode codecs: Negative
positions are treated as being relative to the end of
the input and out of bounds positions result in an
IndexError.
Also update the PEP and include an explanation of
this in the documentation for codecs.register_error.
Fixes a small bug in iconv_codecs: if the position
from the callback is negative *add* it to the size
instead of substracting it.
From SF patch #677429.
types. The special handling for these can now be removed from save_newobj().
Add some testing for this.
Also add support for setting the 'fast' flag on the Python Pickler class,
which suppresses use of the memo.
When mwh added extended slicing, strings and unicode became mappings.
Thus, dict was set which prevented an error when doing:
newstr = 'format without a percent' % string_value
This fix raises an exception again when there are no formats
and % with a string value.
'%2147483647d' % -123 segfaults. This was because an integer overflow
in a comparison caused the string resize to be skipped. After fixing
the overflow, this could call _PyString_Resize() with a negative size,
so I (1) test for that and raise MemoryError instead; (2) also added a
test for negative newsize to _PyString_Resize(), raising SystemError
as for all bad arguments.
An identical bug existed in unicodeobject.c, of course.
Will backport to 2.2.2.
Unicode strings (with arbitrary length) are allowed
as entries in the unicode.translate mapping.
Add a test case for multicharacter replacements.
(Multicharacter replacements were enabled by the
PEP 293 patch)
wrong thing for a unicode subclass when there were zero string
replacements. The example given in the SF bug report was only one way
to trigger this; replacing a string of length >= 2 that's not found is
another. The code would actually write outside allocated memory if
replacement string was longer than the search string.
(I wonder how many more of these are lurking? The unicode code base
is full of wonders.)
Bugfix candidate; this same bug is present in 2.2.1.
currently return inconsistent results for ints and longs; in
particular: hex/oct/%u/%o/%x/%X of negative short ints, and x<<n that
either loses bits or changes sign. (No warnings for repr() of a long,
though that will also change to lose the trailing 'L' eventually.)
This introduces some warnings in the test suite; I'll take care of
those later.
The staticforward define was needed to support certain broken C
compilers (notably SCO ODT 3.0, perhaps early AIX as well) botched the
static keyword when it was used with a forward declaration of a static
initialized structure. Standard C allows the forward declaration with
static, and we've decided to stop catering to broken C compilers. (In
fact, we expect that the compilers are all fixed eight years later.)
I'm leaving staticforward and statichere defined in object.h as
static. This is only for backwards compatibility with C extensions
that might still use it.
XXX I haven't updated the documentation.
[ 400998 ] experimental support for extended slicing on lists
somewhat spruced up and better tested than it was when I wrote it.
Includes docs & tests. The whatsnew section needs expanding, and arrays
should support extended slices -- later.
for 'str' and 'unicode', and can be used instead of
types.StringTypes, e.g. to test whether something is "a string":
isinstance(x, string) is True for Unicode and 8-bit strings. This
is an abstract base class and cannot be instantiated directly.
don't understand how this function works, also beefed up the docs. The
most common usage error is of this form (often spread out across gotos):
if (_PyString_Resize(&s, n) < 0) {
Py_DECREF(s);
s = NULL;
goto outtahere;
}
The error is that if _PyString_Resize runs out of memory, it automatically
decrefs the input string object s (which also deallocates it, since its
refcount must be 1 upon entry), and sets s to NULL. So if the "if"
branch ever triggers, it's an error to call Py_DECREF(s): s is already
NULL! A correct way to write the above is the simpler (and intended)
if (_PyString_Resize(&s, n) < 0)
goto outtahere;
Bugfix candidate.
This implements ideas from Marc-Andre, Martin, Guido and me on Python-Dev.
"Short" Unicode strings are encoded into a "big enough" stack buffer,
then exactly as much string space as they turn out to need is allocated
at the end. This should have speed benefits akin to Martin's "measure
once, allocate once" strategy, but without needing a distinct measuring
pass.
"Long" Unicode strings allocate as much heap space as they could possibly
need (4 x # Unicode chars), and do a realloc at the end to return the
untouched excess. Since the overallocation is likely to be substantial,
this shouldn't burden the platform realloc with unusably small excess
blocks.
Also simplified uses of the PyString_xyz functions. Also added a release-
build check that 4*size doesn't overflow a C int. Sooner or later, that's
going to happen.
http://www.python.org/sf/444708
This adds the optional argument for str.strip
to unicode.strip too and makes it possible
to call str.strip with a unicode argument
and unicode.strip with a str argument.
pointers is a signed type. Changing "allocated" to a signed int makes
undetected overflow more likely, but there was no overflow detection
before either.
Add a method zfill to str, unicode and UserString and change
Lib/string.py accordingly.
This activates the zfill version in unicodeobject.c that was
commented out and implements the same in stringobject.c. It also
adds the test for unicode support in Lib/string.py back in and
uses repr() instead() of str() (as it was before Lib/string.py 1.62)
PEP 285. Everything described in the PEP is here, and there is even
some documentation. I had to fix 12 unit tests; all but one of these
were printing Boolean outcomes that changed from 0/1 to False/True.
(The exception is test_unicode.py, which did a type(x) == type(y)
style comparison. I could've fixed that with a single line using
issubtype(x, type(y)), but instead chose to be explicit about those
places where a bool is expected.
Still to do: perhaps more documentation; change standard library
modules to return False/True from predicates.
Objects/
fileobject.c
stringobject.c
unicodeobject.c
This commit doesn't include the cleanup patches for stringobject.c and
unicodeobject.c which are shown separately in the patch manager. Those
patches will be regenerated and applied in a subsequent commit, so as
to preserve a fallback position (this commit to those files).
Fix for the UTF-8 decoder: it will now accept isolated surrogates
(previously it raised an exception which causes round-trips to
fail).
Added new tests for UTF-8 round-trip safety (we rely on UTF-8 for
marshalling Unicode objects, so we better make sure it works for
all Unicode code points, including isolated surrogates).
Bumped the PYC magic in a non-standard way -- please review. This
was needed because the old PYC format used illegal UTF-8 sequences
for isolated high surrogates which now raise an exception.
This is best reproduced by
while 1:
class U(unicode):
pass
U(u"xxxxxx")
The unicode_dealloc() code wasn't properly freeing the str and defenc
fields of the Unicode object when freeing a subtype instance. Fixed
this by a subtle refactoring that actually reduces the amount of code
slightly.
This patch implements what we have discussed on python-dev late in
September: str(obj) and unicode(obj) should behave similar, while
the old behaviour is retained for unicode(obj, encoding, errors).
The patch also adds a new feature with which objects can provide
unicode(obj) with input data: the __unicode__ method. Currently no
new tp_unicode slot is implemented; this is left as option for the
future.
Note that PyUnicode_FromEncodedObject() no longer accepts Unicode
objects as input. The API name already suggests that Unicode
objects do not belong in the list of acceptable objects and the
functionality was only needed because
PyUnicode_FromEncodedObject() was being used directly by
unicode(). The latter was changed in the discussed way:
* unicode(obj) calls PyObject_Unicode()
* unicode(obj, encoding, errors) calls PyUnicode_FromEncodedObject()
One thing left open to discussion is whether to leave the
PyUnicode_FromObject() API as a thin API extension on top of
PyUnicode_FromEncodedObject() or to turn it into a (macro) alias
for PyObject_Unicode() and deprecate it. Doing so would have some
surprising consequences though, e.g. u"abc" + 123 would turn out
as u"abc123"...
[Marc-Andre didn't have time to check this in before the deadline. I
hope this is OK, Marc-Andre! You can still make changes and commit
them on the trunk after the branch has been made, but then please mail
Barry a context diff if you want the change to be merged into the
2.2b1 release branch. GvR]
many types were subclassable but had a xxx_dealloc function that
called PyObject_DEL(self) directly instead of deferring to
self->ob_type->tp_free(self). It is permissible to set tp_free in the
type object directly to _PyObject_Del, for non-GC types, or to
_PyObject_GC_Del, for GC types. Still, PyObject_DEL was a tad faster,
so I'm fearing that our pystone rating is going down again. I'm not
sure if doing something like
void xxx_dealloc(PyObject *self)
{
if (PyXxxCheckExact(self))
PyObject_DEL(self);
else
self->ob_type->tp_free(self);
}
is any faster than always calling the else branch, so I haven't
attempted that -- however those types whose own dealloc is fancier
(int, float, unicode) do use this pattern.
elements which are not Unicode objects or strings. (This matches
the string.join() behaviour.)
Fix a memory leak in the .join() method which occurs in case
the Unicode resize fails.
Restore the test_unicode output.
+ These were leaving the hash fields at 0, which all string and unicode
routines believe is a legitimate hash code. As a result, hash() applied
to str and unicode subclass instances always returned 0, which in turn
confused dict operations, etc.
+ Changed local names "new"; no point to antagonizing C++ compilers.
Removed all instances of Py_UCS2 from the codebase, and so also (I hope)
the last remaining reliance on the platform having an integral type
with exactly 16 bits.
PyUnicode_DecodeUTF16() and PyUnicode_EncodeUTF16() now read and write
one byte at a time.
And remove all the extern decls in the middle of .c files.
Apparently, it was excluded from the header file because it is
intended for internal use by the interpreter. It's still intended for
internal use and documented as such in the header file.
#caused warnings with the VMS C compiler. (SF bug #442998, in part.)
On a narrow system the current code should never be executed since ch
will always be < 0x10000.
Marc-Andre: you may end up fixing this a different way, since I
believe you have plans to generate \U for surrogate pairs. I'll leave
that to you.
Implement sys.maxunicode.
Explicitly wrap around upper/lower computations for wide Py_UNICODE.
When decoding large characters with UTF-8, represent expected test
results using the \U notation.
Add configure option --enable-unicode.
Add config.h macros Py_USING_UNICODE, PY_UNICODE_TYPE, Py_UNICODE_SIZE,
SIZEOF_WCHAR_T.
Define Py_UCS2.
Encode and decode large UTF-8 characters into single Py_UNICODE values
for wide Unicode types; likewise for UTF-16.
Remove test whether sizeof Py_UNICODE is two.
unicodeobject.h, which forces sizeof(Py_UNICODE) == sizeof(Py_UCS4).
(this may be good enough for platforms that doesn't have a 16-bit
type. the UTF-16 codecs don't work, though)
UTF-16 codec will now interpret and remove a *leading* BOM mark. Sub-
sequent BOM characters are no longer interpreted and removed.
UTF-16-LE and -BE pass through all BOM mark characters.
These changes should get the UTF-16 codec more in line with what
the Unicode FAQ recommends w/r to BOM marks.
to string.join(), so that when the latter figures out in midstream that
it really needs unicode.join() instead, unicode.join() can actually get
all the sequence elements (i.e., there's no guarantee that the sequence
passed to string.join() can be iterated over *again* by unicode.join(),
so string.join() must not pass on the original sequence object anymore).
Patch #419651: Metrowerks on Mac adds 0x itself
C std says %#x and %#X conversion of 0 do not add the 0x/0X base marker.
Metrowerks apparently does. Mark Favas reported the same bug under a
Compaq compiler on Tru64 Unix, but no other libc broken in this respect
is known (known to be OK under MSVC and gcc).
So just try the damn thing at runtime and see what the platform does.
Note that we've always had bugs here, but never knew it before because
a relevant test case didn't exist before 2.1.
patch for sharing single character Unicode objects.
Martin's patch had to be reworked in a number of ways to take Unicode
resizing into consideration as well. Here's what the updated patch
implements:
* Single character Unicode strings in the Latin-1 range are shared
(not only ASCII chars as in Martin's original patch).
* The ASCII and Latin-1 codecs make use of this optimization,
providing a noticable speedup for single character strings. Most
Unicode methods can use the optimization as well (by virtue
of using PyUnicode_FromUnicode()).
* Some code cleanup was done (replacing memcpy with Py_UNICODE_COPY)
* The PyUnicode_Resize() can now also handle the case of resizing
unicode_empty which previously resulted in an error.
* Modified the internal API _PyUnicode_Resize() and
the public PyUnicode_Resize() API to handle references to
shared objects correctly. The _PyUnicode_Resize() signature
changed due to this.
* Callers of PyUnicode_FromUnicode() may now only modify the Unicode
object contents of the returned object in case they called the API
with NULL as content template.
Note that even though this patch passes the regression tests, there
may still be subtle bugs in the sharing code.
"%#x" % 0
blew up, at heart because C sprintf supplies a base marker if and only if
the value is not 0. I then fixed that, by tolerating C's inconsistency
when it does %#x, and taking away that *Python* produced 0x0 when
formatting 0L (the "long" flavor of 0) under %#x itself. But after talking
with Guido, we agreed it would be better to supply 0x for the short int
case too, despite that it's inconsistent with C, because C is inconsistent
with itself and with Python's hex(0) (plus, while "%#x" % 0 didn't work
before, "%#x" % 0L *did*, and returned "0x0"). Similarly for %#X conversion.
http://sourceforge.net/tracker/index.php?func=detail&aid=415514&group_id=5470&atid=105470
For short ints, Python defers to the platform C library to figure out what
%#x should do. The code asserted that the platform C returned a string
beginning with "0x". However, that's not true when-- and only when --the
*value* being formatted is 0. Changed the code to live with C's inconsistency
here. In the meantime, the problem does not arise if you format a long 0 (0L)
instead. However, that's because the code *we* wrote to do %#x conversions on
longs produces a leading "0x" regardless of value. That's probably wrong too:
we should drop leading "0x", for consistency with C, when (& only when) formatting
0L. So I changed the long formatting code to do that too.
implementation details inside the ucnhash module.
also cleaned up the unicode copyright blurb a little; Secret Labs'
internal revision history isn't that interesting...
except that it always returns Unicode objects.
A new C API PyObject_Unicode() is also provided.
This closes patch #101664.
Written by Marc-Andre Lemburg. Copyright assigned to Guido van Rossum.
in case the parameters are out of bounds and fixes error handling
for .count(), .startswith() and .endswith() for the case of
mixed string/Unicode objects.
This patch adds Python style index semantics to PyUnicode_Count()
indices (including the special handling of negative indices).
The patch is an extended version of patch #103249 submitted
by Michael Hudson (mwh) on SF. It also includes new test cases.
The mapping dictionaries can now contain 1-n mappings, meaning
that character ordinals may be mapped to strings or Unicode object,
e.g. 0x0078 ('x') -> u"abc", causing the ordinal to be replaced by
the complete string or Unicode object instead of just one character.
Another feature introduced by the patch is that of mapping oridnals to
the emtpy string. This allows removing characters.
The patch is different from patch #103100 in that it does not cause a
performance hit for the normal use case of 1-1 mappings.
Written by Marc-Andre Lemburg, copyright assigned to Guido van Rossum.
codec to not apply Latin-1 mappings for keys which are not found
in the mapping dictionaries, but instead treat them as undefined
mappings.
The patch was originally written by Martin v. Loewis with some
additional (cosmetic) changes and an updated test script
by Marc-Andre Lemburg.
The standard codecs were recreated from the most current files
available at the Unicode.org site using the Tools/scripts/gencodec.py
tool.
This patch closes the bugs #116285 and #119960.
after unicode_empty has been freed, otherwise it might not point to
the real start of the unicode_freelist. Final closure for SF bug
#110681, Jitterbug PR#398.
Add definitions of INT_MAX and LONG_MAX to pyport.h.
Remove includes of limits.h and conditional definitions of INT_MAX
and LONG_MAX elsewhere.
This closes SourceForge patch #101659 and bug #115323.
Note a curious extension to the std C rules: x, X and o formatting can never produce
a sign character in C, so the '+' and ' ' flags are meaningless for them. But
unbounded ints *can* produce a sign character under these conversions (no fixed-
width bitstring is wide enough to hold all negative values in 2's-comp form). So
these flags become meaningful in Python when formatting a Python long which is too
big to fit in a C long. This required shuffling around existing code, which hacked
x and X conversions to death when both the '#' and '0' flags were specified: the
hacks weren't strong enough to deal with the simultaneous possibility of the ' ' or
'+' flags too, since signs were always meaningless before for x and X conversions.
Isomorphic shuffling was required in unicodeobject.c.
Also added dozens of non-trivial new unbounded-int test cases to test_format.py.
all, either to see whether the # of chars fit in an int, or that the
amount of memory needed fit in a size_t. Checking these is expensive, but
the alternative is silently wrong answers (as in the bug report) or
core dumps (which were easy to provoke using Unicode strings).
resized after creation. 0-length strings are usually shared
and _PyString_Resize() fails on these shared strings.
Fixes [ Bug #111667 ] unicode core dump.
Properly end a comment block. It was terminated fine later but by a subsequent
block and. It was also in #if 0. This patch is so trivial I can't believe I am
talking about it. :)
function (together with other locale aware ones) should into a new collation
support module. See python-dev for a discussion of this removal.
Note: This patch should also be applied to the 1.6 branch.
the Python Unicode implementation.
The internal buffer used for implementing the buffer protocol
is renamed to defenc to make this change visible. It now holds the
default encoded version of the Unicode object and is calculated
on demand (NULL otherwise).
Since the default encoding defaults to ASCII, this will mean that
Unicode objects which hold non-ASCII characters will no longer
work on C APIs using the "s" or "t" parser markers. C APIs must now
explicitly provide Unicode support via the "u", "U" or "es"/"es#"
parser markers in order to work with non-ASCII Unicode strings.
(Note: this patch will also have to be applied to the 1.6 branch
of the CVS tree.)
The UTF-8 decoder is still buggy (i.e. it doesn't pass Markus Kuhn's
stress test), mainly due to the following construct:
#define UTF8_ERROR(details) do { \
if (utf8_decoding_error(&s, &p, errors, details)) \
goto onError; \
continue; \
} while (0)
(The "continue" statement is supposed to exit from the outer loop,
but of course, it doesn't. Indeed, this is a marvelous example of
the dangers of the C programming language and especially of the C
preprocessor.)
comments, docstrings or error messages. I fixed two minor things in
test_winreg.py ("didn't" -> "Didn't" and "Didnt" -> "Didn't").
There is a minor style issue involved: Guido seems to have preferred English
grammar (behaviour, honour) in a couple places. This patch changes that to
American, which is the more prominent style in the source. I prefer English
myself, so if English is preferred, I'd be happy to supply a patch myself ;)
value is calculated from the character values, in a way
that makes sure an 8-bit ASCII string and a unicode string
with the same contents get the same hash value.
(as a side effect, this also works for ISO Latin 1 strings).
for more details, see the python-dev discussion.
Fixed a bug in PyUnicode_Count() which would have caused a
core dump in case of substring coercion failure.
Synchronized .count() with the string method of the same name
to return len(s)+1 for s.count('').
Fixed %c formatting to check for one character arguments. Thanks
to Finn Bock for finding this bug.
Added a fix for bug PR#348 which originated from not resetting
the globals correctly in _PyUnicode_Fini().
Change the default encoding to 'ascii' (it was previously
defined as UTF-8).
Note: The implementation still uses UTF-8 to implement
the buffer protocol, so C APIs will still see UTF-8. This
is on purpose: rather than fixing the Unicode implementation,
the C APIs should be made Unicode aware.
Added support for user settable default encodings. The
current implementation uses a per-process global which
defines the value of the encoding parameter in case it
is set to NULL (meaning: use the default encoding).
Fix the string methods that implement slice-like semantics with
optional args (count, find, endswith, etc.) to properly handle
indeces outside [INT_MIN, INT_MAX]. Previously the "i" formatter
for PyArg_ParseTuple was used to get the indices. These could overflow.
This patch changes the string methods to use the "O&" formatter with
the slice_index() function from ceval.c which is used to do the same
job for Python code slices (e.g. 'abcabcabc'[0:1000000000L]).
For more comments, read the patches@python.org archives.
For documentation read the comments in mymalloc.h and objimpl.h.
(This is not exactly what Vladimir posted to the patches list; I've
made a few changes, and Vladimir sent me a fix in private email for a
problem that only occurs in debug mode. I'm also holding back on his
change to main.c, which seems unnecessary to me.)
Fixed a reference leak in the allocator.
Renamed utf8_string to _PyUnicode_AsUTF8String() and made
it external for use by other parts of the interpreter.
The maxsplit functionality in .splitlines() was replaced by the keepends
functionality which allows keeping the line end markers together
with the string.
* New exported API PyUnicode_Resize()
* The experimental Keep-Alive optimization was turned back
on after some tweaks to the implementation. It should now
work without causing core dumps... this has yet to tested
though (switching it off is easy: see the unicodeobject.c
file for details).
* Fixed a memory leak in the Unicode freelist cleanup code.
* Added tests to correctly process the return code from
_PyUnicode_Resize().
* Fixed a bug in the 'ignore' error handling routines
of some builtin codecs. Added test cases for these to
test_unicode.py.
his copy of test_contains.py seems to be broken -- the lines he
deleted were already absent). Checkin messages:
New Unicode support for int(), float(), complex() and long().
- new APIs PyInt_FromUnicode() and PyLong_FromUnicode()
- added support for Unicode to PyFloat_FromString()
- new encoding API PyUnicode_EncodeDecimal() which converts
Unicode to a decimal char* string (used in the above new
APIs)
- shortcuts for calls like int(<int object>) and float(<float obj>)
- tests for all of the above
Unicode compares and contains checks:
- comparing Unicode and non-string types now works; TypeErrors
are masked, all other errors such as ValueError during
Unicode coercion are passed through (note that PyUnicode_Compare
does not implement the masking -- PyObject_Compare does this)
- contains now works for non-string types too; TypeErrors are
masked and 0 returned; all other errors are passed through
Better testing support for the standard codecs.
Misc minor enhancements, such as an alias dbcs for the mbcs codec.
Changes:
- PyLong_FromString() now applies the same error checks as
does PyInt_FromString(): trailing garbage is reported
as error and not longer silently ignored. The only characters
which may be trailing the digits are 'L' and 'l' -- these
are still silently ignored.
- string.ato?() now directly interface to int(), long() and
float(). The error strings are now a little different, but
the type still remains the same. These functions are now
ready to get declared obsolete ;-)
- PyNumber_Int() now also does a check for embedded NULL chars
in the input string; PyNumber_Long() already did this (and
still does)
Followed by:
Looks like I've gone a step too far there... (and test_contains.py
seem to have a bug too).
I've changed back to reporting all errors in PyUnicode_Contains()
and added a few more test cases to test_contains.py (plus corrected
the join() NameError).
Attached you find an update of the Unicode implementation.
The patch is against the current CVS version. I would appreciate
if someone with CVS checkin permissions could check the changes
in.
The patch contains all bugs and patches sent this week and also
fixes a leak in the codecs code and a bug in the free list code
for Unicode objects (which only shows up when compiling Python
with Py_DEBUG; thanks to MarkH for spotting this one).
Walter Dörwald
Andrew M. Kuchling
Fred Drake
Michael W. Hudson
Marc-André Lemburg
Skip Montanaro
Thomas Heller
Tim Peters
Hye-Shik Chang
Nicholas Bastin
Guido van Rossum
Raymond Hettinger
Martin v. Löwis
Jeremy Hylton
Mark Hammond
Neal Norwitz
Neil Schemenauer
Barry Warsaw
Andrew MacIntyre
Fredrik Lundh
Ka-Ping Yee
Trent Mick
Peter Schneider-Kamp
Thomas Wouters
Greg Stein
Sjoerd Mullender