Assorted: bump the serial number via a trivial new bumpserialno()
function. The point is to give a single place to set a breakpoint when
waiting for a specific serial number.
of get_line. This makes test_bufio finish in 1.7 seconds instead of 57
seconds on my machine (with Py_DEBUG defined).
Also, rename the local variables n1 and n2 to used_v_size and
total_v_size.
When WITH_PYMALLOC is defined, define PYMALLOC_DEBUG to enable the debug
allocator. This can be done independent of build type (release or debug).
A debug build automatically defines PYMALLOC_DEBUG when pymalloc is
enabled. It's a detected error to define PYMALLOC_DEBUG when pymalloc
isn't enabled.
Two debugging entry points defined only under PYMALLOC_DEBUG:
+ _PyMalloc_DebugCheckAddress(const void *p) can be used (e.g., from gdb)
to sanity-check a memory block obtained from pymalloc. It sprays
info to stderr (see next) and dies via Py_FatalError if the block is
detectably damaged.
+ _PyMalloc_DebugDumpAddress(const void *p) can be used to spray info
about a debug memory block to stderr.
A tiny start at implementing "API family" checks isn't good for
anything yet.
_PyMalloc_DebugRealloc() has been optimized to do little when the new
size is <= old size. However, if the new size is larger, it really
can't call the underlying realloc() routine without either violating its
contract, or knowing something non-trivial about how the underlying
realloc() works. A memcpy is always done in this case.
This was a disaster for (and only) one of the std tests: test_bufio
creates single text file lines up to a million characters long. On
Windows, fileobject.c's get_line() uses the horridly funky
getline_via_fgets(), which keeps growing and growing a string object
hoping to find a newline. It grew the string object 1000 bytes each
time, so for a million-character string it took approximately forever
(I gave up after a few minutes).
So, also:
fileobject.c, getline_via_fgets(): When a single line is outrageously
long, grow the string object at a mildly exponential rate, instead of
just 1000 bytes at a time.
That's enough so that a debug-build test_bufio finishes in about 5 seconds
on my Win98SE box. I'm curious to try this on Win2K, because it has very
different memory behavior than Win9X, and test_bufio always took a factor
of 10 longer to complete on Win2K. It *could* be that the endless
reallocs were simply killing it on Win2K even in the release build.
Also move all _PyMalloc_XXX entry points into obmalloc.c.
The Windows build works fine.
The Unix build is changed here (Makefile.pre.in), but not tested.
No other platform's build process has been fiddled.
Konrad was too kind. Not only did it raise an exception, the specific
exception it raised made no sense. These are old bugs in complex_pow()
and friends:
1. Raising 0 to a negative power isn't a range error, it's a domain
error, so changed c_pow() to set errno to EDOM in that case instead
of ERANGE.
2. Changed complex_pow() to:
A. Used the Py_ADJUST_ERANGE2 macro to try to clear errno of a spurious
ERANGE error due to underflow in the libm pow() called by c_pow().
B. Produced different exceptions depending on the errno value:
i) For errno==EDOM, raise ZeroDivisionError instead of ValueError.
This is for consistency with the non-complex cases 0.0**-2 and
0**-2 and 0L**-2.
ii) For errno==ERANGE, raise OverflowError.
Bugfix candidate.
The proper fix is not quite what was submitted; it's really better to
take the class of the object passed rather than calling PyMethod_New
with NULL pointer args, because that can then cause other core dumps
later.
I also added a testcase for the fix to classmethods() in test_descr.py.
I've already applied this to the 2.2 branch.
As promised in my response to the bug report, I'm not really fixing
it; in fact, one could argule over what the proper fix should do.
Instead, I'm adding a little magic that raises TypeError if you try to
pickle an instance of a class that has __slots__ but doesn't define or
override __getstate__. This is done by adding a bozo __getstate__
that always raises TypeError.
There were several places that assumed the md_dict field was always
set, but it needn't be. Fixed these to be more careful.
I changed PyModule_GetDict() to initialize md_dict to a new dictionary
if it's NULL.
Bugfix candidate.
and (b) stop trying to prevent file growth.
Beef up the file.truncate() docs.
Change test_largefile.py to stop assuming that f.truncate() moves the
file pointer to the truncation point, and to verify instead that it leaves
the file position alone. Remove the test for what happens when a
specified size exceeds the original file size (it's ill-defined, according
to the Single Unix Spec).
dropping MS's inadequate _chsize() function. This was inspired by
SF patch 498109 ("fileobject truncate support for win32"), which I
rejected.
libstdtypes.tex: Someone who knows should update the availability
blurb. For example, if it's available on Linux, it would be good to
say so.
test_largefile: Uncommented the file.truncate() tests, and reworked to
do more. The old comment about "permission errors" in the truncation
tests under Windows was almost certainly due to that the file wasn't open
for *write* access at this point, so of course MS wouldn't let you
truncate it. I'd be appalled if a Unixish system did.
CAUTION: Someone should run this test on Linux (etc) too. The
truncation part was commented out before. Note that test_largefile isn't
run by default.
Adapter from SF patch 528038; fixes SF bug 527816.
The wrapper for __nonzero__ should be wrap_inquiry rather than
wrap_unaryfunc, since the slot returns an int, not a PyObject *.
Another year in the quest to out-guess random C behavior.
Added macros Py_ADJUST_ERANGE1(X) and Py_ADJUST_ERANGE2(X, Y). The latter
is useful for functions with complex results. Two corrections to errno-
after-libm-call are attempted:
1. If the platform set errno to ERANGE due to underflow, clear errno.
Some unknown subset of libm versions and link options do this. It's
allowed by C89, but I never figured anyone would do it.
2. If the platform did not set errno but overflow occurred, force
errno to ERANGE. C89 required setting errno to ERANGE, but C99
doesn't. Some unknown subset of libm versions and link options do
it the C99 way now.
Bugfix candidate, but hold off until some Linux people actually try it,
with and without -lieee. I'll send a help plea to Python-Dev.
PyNumber_Add() tries the nb_add slot first, then falls back to
sq_concat. However, tt didn't check the return value of sq_concat.
If sq_concat returns NotImplemented, raise the standard TypeError.
[ 526072 ] pickling os.stat results round II
structseq's constructors can now take "invisible" fields in a dict.
Gave the constructors better error messages.
their __reduce__ method puts these fields in a dict.
(this is all in aid of getting os.stat_result's to pickle portably)
Also fixes
[ 526039 ] devious code can crash structseqs
Thought needed about how much of this counts as a bugfix. Certainly
#526039 needs to be fixed.
platform realloc(p, 0) returns NULL, so MALLOC_ZERO_RETURNS_NULL can
be correctly undefined yet realloc(p, 0) can return NULL anyway.
Prevent realloc(p, 0) doing free(p) and returning NULL via a different
hack. Would probably be better to get rid of MALLOC_ZERO_RETURNS_NULL
entirely.
Bugfix candidate.
Due to the bizarre definition of _PyLong_Copy(), creating an instance
of a subclass of long with a negative value could cause core dumps
later on. Unfortunately it looks like the behavior of _PyLong_Copy()
is quite intentional, so the fix is more work than feels comfortable.
This fix is almost, but not quite, the code that Naofumi Honda added;
in addition, I added a test case.
Objects/
fileobject.c
stringobject.c
unicodeobject.c
This commit doesn't include the cleanup patches for stringobject.c and
unicodeobject.c which are shown separately in the patch manager. Those
patches will be regenerated and applied in a subsequent commit, so as
to preserve a fallback position (this commit to those files).
Fix for the UTF-8 decoder: it will now accept isolated surrogates
(previously it raised an exception which causes round-trips to
fail).
Added new tests for UTF-8 round-trip safety (we rely on UTF-8 for
marshalling Unicode objects, so we better make sure it works for
all Unicode code points, including isolated surrogates).
Bumped the PYC magic in a non-standard way -- please review. This
was needed because the old PYC format used illegal UTF-8 sequences
for isolated high surrogates which now raise an exception.
NULL, so that you can call PyType_Ready() to initialize a type that
is to be separately compiled with C on Windows.
inherit_special(): Add a long comment explaining that you have to set
tp_new if your base class is PyBaseObject_Type.
Fix for SF bug #492345. (I could've sworn I checked this in, but
apparently I didn't!)
This code:
class Classic:
pass
class New(Classic):
__metaclass__ = type
attempts to create a new-style class with only classic bases -- but it
doesn't work right. Attempts to fix it so it works caused problems
elsewhere, so I'm now raising a TypeError in this case.
delivered bizarre results. Check float_divmod for a Py_NotImplemented
return and pass it along (instead of treating Py_NotImplemented as a
2-tuple).
CONVERT_TO_DOUBLE: Added comments; this macro is obscure.
PyDict_UpdateFromSeq2(): removed it.
PyDict_MergeFromSeq2(): made it public and documented it.
PyDict_Merge() docs: updated to reveal <wink> that the second
argument can be any mapping object.
no get function was defined, the property's doc string was
inaccessible. This was because the test for prop_get was made
*before* the test for a NULL/None object argument.
Also changed the property class defined in Python in a comment to test
for NULL to decide between get and delete; this makes it less Python
but then, assigning None to a property doesn't delete it!
PyString_FromString():
Since the length of the string is already being stored in size,
changed the strcpy() to a memcpy() for a small speed improvement.
out the for loop at the end intended to zero out new items wasn't
doing anything, because sv->ob_size was already equal to newsize. The
fix slightly refactors the function, introducing a variable oldsize
and doing away with sizediff (which was used only once), and using
oldsize and newsize consistently. I also added comments explaining
what the two for loops do. (Looking at the CVS annotation of this
function, it's no miracle a bug crept in -- this has been patched by
many different folks! :-)
This is best reproduced by
while 1:
class U(unicode):
pass
U(u"xxxxxx")
The unicode_dealloc() code wasn't properly freeing the str and defenc
fields of the Unicode object when freeing a subtype instance. Fixed
this by a subtle refactoring that actually reduces the amount of code
slightly.
PyCell_Set() incremenets the reference count, so the earlier XINCREF
causes a leak.
Also make a number of small performance improvements to the code on
the assumption that most of the time variables are not rebound across
a FastToLocals() / LocalsToFast() pair.
Replace uses of PyCell_Set() and PyCell_Get() with PyCell_SET() and
PyCell_GET(), since the frame is guaranteed to contain cells.
Add a missing DECREF in an obscure corner. If the str() or repr() of
an object passed to a string interpolation -- e.g. "%s" % obj --
returns a non-string, the returned object was leaked.
Repair an indentation glitch.
Replace a bunch of PyString_AsString() calls (and their ilk) with
macros.
It was easier than I thought, assuming that no other things contribute
to the instance size besides slots -- a pretty good bet. With a test
suite, no less!
happy if one could delete the __dict__ attribute of an instance. I
love to make Jim happy, so here goes...
- New-style objects now support deleting their __dict__. This is for
all intents and purposes equivalent to assigning a brand new empty
dictionary, but saves space if the object is not used further.
int_mul(): new and vastly simpler overflow checking. Whether it's
faster or slower will likely vary across platforms, favoring boxes
with fast floating point. OTOH, we no longer have to worry about
people shipping broken LONG_BIT definitions <0.9 wink>.
There's now a new structmember code, T_OBJECT_EX, which is used for
all __slot__ variables (except __weakref__, which has special behavior
anyway). This new code raises AttributeError when the variable is
NULL rather than converting NULL to None.
string object (or a Unicode that's trivially converted to ASCII).
PyObject_GetAttr(): add an 'else' to the Unicode test like
PyObject_SetAttr() already has.
Rather than tweaking the inheritance of type object slots (which turns
out to be too messy to try), this fix adds a __hash__ to the list and
dict types (the only mutable types I'm aware of) that explicitly
raises an error. This has the advantage that list.__hash__([]) also
raises an error (previously, this would invoke object.__hash__([]),
returning the argument's address); ditto for dict.__hash__.
The disadvantage for this fix is that 3rd party mutable types aren't
automatically fixed. This should be added to the rules for creating
subclassable extension types: if you don't want your object to be
hashable, add a tp_hash function that raises an exception.
Also, it's possible that I've forgotten about other mutable types for
which this should be done.
SF patch #480716 by Greg Chapman fixes the problem that super's
__get__ method always returns an instance of super, even when the
instance whose __get__ method is called is an instance of a subclass
of super.
Other issues fixed:
- super(C, C()).__class__ would return the __class__ attribute of C()
rather than the __class__ attribute of the super object. This is
confusing. To fix this, I decided to change the semantics of super
so that it only applies to code attributes, not to data attributes.
After all, overriding data attributes is not supported anyway.
- While super(C, x) carefully checked that x is an instance of C,
super(C).__get__(x) made no such check, allowing for a loophole.
This is now fixed.
slot_tp_descr_set(): When deleting an attribute described by a
descriptor implemented in Python, the descriptor's __del__ method is
called by the slot_tp_descr_set dispatch function. This is bogus --
__del__ already has a different meaning. Renaming this use of __del__
is renamed to __delete__.
Bugfix candidate.
int_repr(): we've never had a buffer big enough to hold the largest
possible result on a 64-bit box. Now that we're using snprintf instead
of sprintf, this can lead to nonsense results instead of random stack
corruption.
pass the buffer length. Stop using it. It should be deprecated, but too
late in the release cycle to do that now.
New static format_float() does the same thing but requires passing the
buffer length too. Use it instead.
const char* instead of char*. The change is conceptually correct, and
indirectly fixes a compiler wng introduced when somebody else innocently
passed a const char* to this function.
sprintf() to PyOS_snprintf() for buffer overrun avoidance.
complex_print(), complex_repr(), complex_str(): Call complex_to_buf()
passing in sizeof(buf).
confusing error messages. If a new-style class has no sequence or
mapping behavior, attempting to use the indexing notation with a
non-integer key would complain that the sequence index must be an
integer, rather than complaining that the operation is not supported.
of multiple inheritance from a mix of new- and classic-style classes.
This is his patch, plus a start at some test cases from me. Will check
in more, plus a NEWS blurb, later tonight.
object, so the "Metroworks only" section should not decref it in case
of error (the caller is responsible for decref'ing in case of error --
and does).
helping for types that defined tp_richcmp but not tp_compare, although
that's when it's most valuable, and strings moved into that category
since the fast path was first introduced. Now it helps for same-type
non-Instance objects that define rich or 3-way compares.
For all the edits here, the rest just amounts to moving the fast path from
do_richcmp into PyObject_RichCompare, saving a layer of function call
(measurable on my box!). This loses when NESTING_LIMIT is exceeded, but I
don't care about that (fast-paths are for normal cases, not pathologies).
Also added a tasteful <wink> label to get out of PyObject_RichCompare, as
the if/else nesting in this routine was getting incomprehensible.
Try to ensure that divmod(-0.0, 1.0) -> (-0.0, +0.0) across platforms.
It always did on Windows, and still does. It didn't on Linux. Alas,
there's no platform-independent way to write a test case for this.
Bugfix candidate.
presence of NaNs. So pass the issue on to the platform libm fabs();
after all, fabs() is a std C function because you can't implement it
correctly in portable C89.
should just avoid calling it in the first place to avoid waiting for a repr
of a large object like a dict or list. The result of PyObject_Repr() was
being leaked as well.
Bugfix candidate!
XXX Remaining problems:
- The GC module doesn't know about these; I think it has its reasons
to disallow calling __del__, but for now, __del__ on new-style
objects is called when the GC module discards an object, for better
or for worse.
- The code to call a __del__ handler is really ridiculously
complicated, due to all the different debug #ifdefs. I've copied
this from the similar code in classobject.c, so I'm pretty sure I
did it right, but it's not pretty. :-(
- No tests yet.
object.h: Added PyType_CheckExact macro.
typeobject.c, type_new():
+ Use the new macro.
+ Assert that the arguments have the right types rather than do incomplete
runtime checks "sometimes".
+ If this isn't the 1-argument flavor() of type, and there aren't 3 args
total, produce a "types() takes 1 or 3 args" msg before
PyArg_ParseTupleAndKeywords produces a "takes exactly 3" msg.
the va_list until we are sure we have a format string and need to use it;
this avoid premature initialization and having to finalize it several
different places because of error returns.
and functions: we only need to call PyObject_ClearWeakRefs() if the weakref
list is non-NULL. Since these objects are common but weakrefs are still
unusual, saving the call at deallocation time makes a lot of sense.
PyObject_CallFunctionObArgs() and PyObject_CallMethodObArgs() have the
advantage that no format strings need to be parsed. The CallMethod
variant also avoids creating a new string object in order to retrieve
a method from an object as well.
outer level, the iterator protocol is used for memory-efficiency (the
outer sequence may be very large if fully materialized); at the inner
level, PySequence_Fast() is used for time-efficiency (these should
always be sequences of length 2).
dictobject.c, new functions PyDict_{Merge,Update}FromSeq2. These are
wholly analogous to PyDict_{Merge,Update}, but process a sequence-of-2-
sequences argument instead of a mapping object. For now, I left these
functions file static, so no corresponding doc changes. It's tempting
to change dict.update() to allow a sequence-of-2-seqs argument too.
Also changed the name of dictionary's keyword argument from "mapping"
to "x". Got a better name? "mapping_or_sequence_of_pairs" isn't
attractive, although more so than "mosop" <wink>.
abstract.h, abstract.tex: Added new PySequence_Fast_GET_SIZE function,
much faster than going thru the all-purpose PySequence_Size.
libfuncs.tex:
- Document dictionary().
- Fiddle tuple() and list() to admit that their argument is optional.
- The long-winded repetitions of "a sequence, a container that supports
iteration, or an iterator object" is getting to be a PITA. Many
months ago I suggested factoring this out into "iterable object",
where the definition of that could include being explicit about
generators too (as is, I'm not sure a reader outside of PythonLabs
could guess that "an iterator object" includes a generator call).
- Please check my curly braces -- I'm going blind <0.9 wink>.
abstract.c, PySequence_Tuple(): When PyObject_GetIter() fails, leave
its error msg alone now (the msg it produces has improved since
PySequence_Tuple was generalized to accept iterable objects, and
PySequence_Tuple was also stomping on the msg in cases it shouldn't
have even before PyObject_GetIter grew a better msg).
of the if block where it was before. The name is only used inside
that if block, but the storage is referenced outside it via the 's'
variable.
(This patch was part of SF patch #474590 -- RISC OS support.)
The C-code in fileobject.readinto(buffer) which parses
the arguments assumes that size_t is interchangeable
with int:
size_t ntodo, ndone, nnow;
if (f->f_fp == NULL)
return err_closed();
if (!PyArg_Parse(args, "w#", &ptr, &ntodo))
return NULL;
This causes a problem on Alpha / Tru64 / OSF1 v5.1
where size_t is a long and sizeof(long) != sizeof(int).
The patch I'm proposing declares ntodo as an int. An
alternative might be to redefine w# to expect size_t.
[We can't change w# because there are probably third party modules
relying on it. GvR]
response to a message by Laura Creighton on c.l.py. E.g.
>>> 0+''
TypeError: unsupported operand types for +: 'int' and 'str'
(previously this did not mention the operand types)
>>> ''+0
TypeError: cannot concatenate 'str' and 'int' objects
There really isn't a good reason for instance method objects to have
their own __dict__, __doc__ and __name__ properties that just delegate
the request to the function (callable); the default attribute behavior
already does this.
The test suite had to be fixed because the error changes from
TypeError to AttributeError.
'slotdef' structure typedef and 'struct wrapperbase'. By adding the
wrapper docstrings to the slotdef structure, the slotdefs array can
serve as the data structure that drives add_operators(); the wrapper
descriptor contains a pointer to slotdef structure. This replaces
lots of custom code from add_operators() by a loop over the slotdefs
array, and does away with all the tab_xxx tables.
This patch implements what we have discussed on python-dev late in
September: str(obj) and unicode(obj) should behave similar, while
the old behaviour is retained for unicode(obj, encoding, errors).
The patch also adds a new feature with which objects can provide
unicode(obj) with input data: the __unicode__ method. Currently no
new tp_unicode slot is implemented; this is left as option for the
future.
Note that PyUnicode_FromEncodedObject() no longer accepts Unicode
objects as input. The API name already suggests that Unicode
objects do not belong in the list of acceptable objects and the
functionality was only needed because
PyUnicode_FromEncodedObject() was being used directly by
unicode(). The latter was changed in the discussed way:
* unicode(obj) calls PyObject_Unicode()
* unicode(obj, encoding, errors) calls PyUnicode_FromEncodedObject()
One thing left open to discussion is whether to leave the
PyUnicode_FromObject() API as a thin API extension on top of
PyUnicode_FromEncodedObject() or to turn it into a (macro) alias
for PyObject_Unicode() and deprecate it. Doing so would have some
surprising consequences though, e.g. u"abc" + 123 would turn out
as u"abc123"...
[Marc-Andre didn't have time to check this in before the deadline. I
hope this is OK, Marc-Andre! You can still make changes and commit
them on the trunk after the branch has been made, but then please mail
Barry a context diff if you want the change to be merged into the
2.2b1 release branch. GvR]
the left-hand operand may not be the proxy in all cases. If it isn't,
we end up doing two things: a) unwrapping something that isn't a
PyWeakReference (later resulting in a core dump) and b) passing a
proxy as the right-hand operand anyway, even though that can't be
handled by the actual handler (maybe eventually causing a core dump).
This is fixed by always unwrapping all the proxies involved before
passing anything to the actual handler.
isinstance() now allows any object as the first argument and a class, a
type or something with a __bases__ tuple attribute for the second
argument. This closes SF patch #464992.
object.c, PyObject_Str: Don't try to optimize anything except exact
string objects here; in particular, let str subclasses go thru tp_str,
same as non-str objects. This allows overrides of tp_str to take
effect.
stringobject.c:
+ string_print (str's tp_print): If the argument isn't an exact string
object, get one from PyObject_Str.
+ string_str (str's tp_str): Make a genuine-string copy of the object if
it's of a proper str subclass type. str() applied to a str subclass
that doesn't override __str__ ends up here.
test_descr.py: New str_of_str_subclass() test.
efficient:
- recurse down subclasses only once rather than for each affected
slot;
- short-circuit recursing down subclasses when a subclass has its own
definition of the name that caused the update_slot() calls in the
first place;
- inline collect_ptrs().
using the same algorithm as the slot updates. The slotdefs array is
now sorted by slot offset and has an interned string object corresponding
to the name added to each item. More can be done but I need to commit
this first as a working intermediate stage.
The problem is that if fread() returns a short count, we attempt
another fread() the next time through the loop, and apparently glibc
clears or ignores the eof condition so the second fread() requires
another ^D to make it see the eof condition.
According to the man page (and the C std, I hope) fread() can only
return a short count on error or eof. I'm using that in the band-aid
solution to avoid calling fread() a second time after a short read.
Note that xreadlines() still has this problem: it calls
readlines(sizehint) until it gets a zero-length return. Since
xreadlines() is mostly used for reading real files, I won't worry
about this until we get a bug report.
inherit_slots(): tp_as_buffer was getting inherited as if it were a
method pointer, rather than a pointer to a vector of method pointers. As
a result, inheriting from a type that implemented buffer methods was
ineffective, leaving all the tp_as_buffer slots NULL in the subclass.
corresponding to a dispatch slot (e.g. __getitem__ or __add__) is set,
calculate the proper dispatch slot and propagate the change to all
subclasses. Because of multiple inheritance, there's no easy way to
avoid always recursing down the tree of subclasses. Who cares?
(There's more to do, but this works. There's also a test for this now.)
lseek(fp, 0L, SEEK_CUR) can make a filedescriptor unusable.
This workaround is expected to last only a few weeks (until GUSI
is fixed), but without it test_email fails.
the problem that slots weren't inherited properly. override_slots()
no longer exists; in its place comes fixup_slot_dispatchers() which
does more and different work and is table-based. (Eventually I want
this table also to replace all the little tab_foo tables.)
Also add a wrapper for __delslice__; this required a change in
test_descrtut.py.
without the Py_TPFLAGS_CHECKTYPES flag) in the wrappers. This
required a few changes in test_descr.py to cope with the fact that the
complex type has __int__, __long__ and __float__ methods that always
raise an exception.
is a list of weak references to types (new-style classes). Make this
accessible to Python as the function __subclasses__ which returns a
list of types -- we don't want Python programmers to be able to
manipulate the raw list.
In order to make this possible, I also had to add weak reference
support to type objects.
This will eventually be used together with a trap on attribute
assignment for dynamic classes for a major speed-up without losing the
dynamic properties of types: when a __foo__ method is added to a
class, the class and all its subclasses will get an appropriate tp_foo
slot function.
This simplifies the rounding in _PyObject_VAR_SIZE, allows to restore the
pre-rounding calling sequence, and allows some nice little simplifications
in its callers. I'm still making it return a size_t, though.
As Guido suggested, this makes the new subclassing code substantially
simpler. But the mechanics of doing it w/ C macro semantics are a mess,
and _PyObject_VAR_SIZE has a new calling sequence now.
Question: The PyObject_NEW_VAR macro appears to be part of the public API.
Regardless of what it expands to, the notion that it has to round up the
memory it allocates is new, and extensions containing the old
PyObject_NEW_VAR macro expansion (which was embedded in the
PyObject_NEW_VAR expansion) won't do this rounding. But the rounding
isn't actually *needed* except for new-style instances with dict pointers
after a variable-length blob of embedded data. So my guess is that we do
not need to bump the API version for this (as the rounding isn't needed
for anything an extension can do unless it's recompiled anyway). What's
your guess?
pad memory to properly align the __dict__ pointer in all cases.
gcmodule.c/objimpl.h, _PyObject_GC_Malloc:
+ Added a "padding" argument so that this flavor of malloc can allocate
enough bytes for alignment padding (it can't know this is needed, but
its callers do).
typeobject.c, PyType_GenericAlloc:
+ Allocated enough bytes to align the __dict__ pointer.
+ Sped and simplified the round-up-to-PTRSIZE logic.
+ Added blank lines so I could parse the if/else blocks <0.7 wink>.
+ Use the _PyObject_VAR_SIZE macro to compute object size.
+ Break the computation into lines convenient for debugger inspection.
+ Speed the round-up-to-pointer-size computation.
many types were subclassable but had a xxx_dealloc function that
called PyObject_DEL(self) directly instead of deferring to
self->ob_type->tp_free(self). It is permissible to set tp_free in the
type object directly to _PyObject_Del, for non-GC types, or to
_PyObject_GC_Del, for GC types. Still, PyObject_DEL was a tad faster,
so I'm fearing that our pystone rating is going down again. I'm not
sure if doing something like
void xxx_dealloc(PyObject *self)
{
if (PyXxxCheckExact(self))
PyObject_DEL(self);
else
self->ob_type->tp_free(self);
}
is any faster than always calling the else branch, so I haven't
attempted that -- however those types whose own dealloc is fancier
(int, float, unicode) do use this pattern.
For a dynamically constructed type object, fill in the tp_doc slot with
a copy of the argument dict's "__doc__" value, provided the latter exists
and is a string.
NOTE: I don't know what to do if it's a Unicode string, so in that case
tp_doc is left NULL (which shows up as Py_None if you do Class.__doc__).
Note that tp_doc holds a char*, not a general PyObject*.
test for getattribute==NULL was bogus because it always found
object.__getattribute__. Pick it apart using the trick we learned
from slot_sq_item, and if it's just a wrapper around
PyObject_GenericGetAttr, zap it. Also added a long XXX comment
explaining the consequences.
test dramatically:
class T(tuple): __dynamic__ = 1
t = T(range(1000))
for i in range(1000): tt = tuple(t)
The speedup was about 5x compared to the previous state of CVS (1.7
vs. 8.8, in arbitrary time units). But it's still more than twice as
slow as as the same test with __dynamic__ = 0 (0.8).
I'm not sure that I really want to go through the trouble of this kind
of speedup for every slot. Even doing it just for the most popular
slots will be a major effort (the new slot_sq_item is 40+ lines, while
the old one was one line with a powerful macro -- unfortunately the
speedup comes from expanding the macro and doing things in a way
specific to the slot signature).
An alternative that I'm currently considering is sketched in PLAN.txt:
trap setattr on type objects. But this will require keeping track of
all derived types using weak references.
pointing to a static variable to hold the object form of the string
was never used, causing endless calls to PyString_InternFromString().
One particular test (with lots of __getitem__ calls) became a third
faster with this!
Unknown whether this fixes it.
- stringobject.c, PyString_FromFormatV: don't assume that va_list is of
a type that can be copied via an initializer.
- errors.c, PyErr_Format: add a va_end() to balance the va_start().
instances).
Also added GC support to various auxiliary types: super, property,
descriptors, wrappers, dictproxy. (Only type objects have a tp_clear
field; the other types are.)
One change was necessary to the GC infrastructure. We have statically
allocated type objects that don't have a GC header (and can't easily
be given one) and heap-allocated type objects that do have a GC
header. Giving these different metatypes would be really ugly: I
tried, and I had to modify pickle.py, cPickle.c, copy.py, add a new
invent a new name for the new metatype and make it a built-in, change
affected tests... In short, a mess. So instead, we add a new type
slot tp_is_gc, which is a simple Boolean function that determines
whether a particular instance has GC headers or not. This slot is
only relevant for types that have the (new) GC flag bit set. If the
tp_is_gc slot is NULL (by far the most common case), all instances of
the type are deemed to have GC headers. This slot is called by the
PyObject_IS_GC() macro (which is only used twice, both times in
gcmodule.c).
I also changed the extern declarations for a bunch of GC-related
functions (_PyObject_GC_Del etc.): these always exist but objimpl.h
only declared them when WITH_CYCLE_GC was defined, but I needed to be
able to reference them without #ifdefs. (When WITH_CYCLE_GC is not
defined, they do the same as their non-GC counterparts anyway.)
- SLOT1BINFULL() macro: changed this to check for __rop__ overriding
__op__, like binary_op1() in abstract.c -- the latter only calls the
slot function once if both types use the same slot function, so the
slot function must make both calls -- which it already did for the
__op__, __rop__ order, but not yet for the __rop__, __op__ order
when B.__class__ is a subclass of A.__class__.
- slot_sq_contains(), slot_nb_nonzero(): use lookup_maybe() rather
than lookup_method() which sets an exception which we then clear.
- slot_nb_coerce(): don't give up when left argument's __coerce__
returns NotImplemented, but give the right argument a chance.
Generalize PyLong_AsLongLong to accept int arguments too. The real point
is so that PyArg_ParseTuple's 'L' code does too. That code was
undocumented (AFAICT), so documented it.
__rop__ now takes precendence over __op__. Those circumstances are:
- Both arguments are new-style classes
- Both arguments are new-style numbers
- Their implementation slots for tp_op differ
- Their types differ
- The right argument's type is a subtype of the left argument's type
Also did this for the ternary operator (pow) -- only the binary case
is dealt with properly though, since __rpow__ is not supported anyway.
their 'i' and 'r' variants) were not being generated if the
corresponding nb_ slots were present in the type object. I bet this
is because floor and true division were introduced after I last
looked at that part of the code.
- Made cls.__module__ writable.
- Ensure that obj.__dict__ is returned as {}, not None, even upon first
reference; it simply springs into life when you ask for it.
(*) The pickling support is provisional for the following reasons:
- It doesn't support classes with __slots__.
- It relies on additional support in copy_reg.py: the C method
__reduce__, defined in the object class, really calls calling
copy_reg._reduce(obj). Eventually the Python code in copy_reg.py
needs to be migrated to C, but I'd like to experiment with the
Python implementation first. The _reduce() code also relies on an
additional helper function, _reconstructor(), defined in
copy_reg.py; this should also be reimplemented in C.
than <type 'ClassName'>. Exception: if it's a built-in type or an
extension type, continue to call it <type 'ClassName>. Call me a
wimp, but I don't want to break more user code than necessary.
same. I hope the test for structural equivalence is stringent enough.
It only allows the assignment if the old and new types:
- have the same basic size
- have the same item size
- have the same dict offset
- have the same weaklist offset
- have the same GC flag bit
- have a common base that is the same except for maybe the dict and
weaklist (which may have been added separately at the same offsets
in both types)
- property() now takes 4 keyword arguments: fget, fset, fdel, doc.
Note that the real purpose of the 'f' prefix is to make fdel fit in
('del' is a keyword, so can't used as a keyword argument name).
- These map to visible readonly attributes 'fget', 'fset', 'fdel',
and '__doc__' in the property object.
- fget/fset/fdel weren't discoverable from Python before.
- __doc__ is new, and allows to associate a docstring with a property.
- if __getattribute__ exists, it is called first;
if it doesn't exists, PyObject_GenericGetAttr is called first.
- if the above raises AttributeError, and __getattr__ exists,
it is called.
classes to __getattribute__, to make it crystal-clear that it doesn't
have the same semantics as overriding __getattr__ on classic classes.
This is a halfway checkin -- I'll proceed to add a __getattr__ hook
that works the way it works in classic classes.
no backwards compatibility to worry about, so I just pushed the
'closure' struct member to the back -- it's never used in the current
code base (I may eliminate it, but that's more work because the getter
and setter signatures would have to change.)
As examples, I added actual docstrings to the getset attributes of a
few types: file.closed, xxsubtype.spamdict.state.
compatibility, this required all places where an array of "struct
memberlist" structures was declared that is referenced from a type's
tp_members slot to change the type of the structure to PyMemberDef;
"struct memberlist" is now only used by old code that still calls
PyMember_Get/Set. The code in PyObject_GenericGetAttr/SetAttr now
calls the new APIs PyMember_GetOne/SetOne, which take a PyMemberDef
argument.
As examples, I added actual docstrings to the attributes of a few
types: file, complex, instance method, super, and xxsubtype.spamlist.
Also converted the symtable to new style getattr.
elements which are not Unicode objects or strings. (This matches
the string.join() behaviour.)
Fix a memory leak in the .join() method which occurs in case
the Unicode resize fails.
Restore the test_unicode output.
complex_coerce() would never be called with a complex argument,
because PyNumber_Coerce[Ex] doesn't bother calling the type's coercion
method if the values already have the same type. But now, of course,
it's possible to pass an instance of a complex *subtype*, and those
must be accepted.
hack, and it's even more disgusting than a PyInstance_Check() call.
If the tp_compare slot is the slot used for overrides in Python,
it's always called.
Add some tests that show what should work too.
only safely call a type's tp_compare slot if the second argument is
also an instance of the same type. I hate to think what
e.g. int_compare() would do with a second argument that's a float!
descriptors for each attribute. The getattr() implementation is
similar to PyObject_GenericGetAttr(), but delegates to im_self instead
of looking in __dict__; I couldn't do this as a wrapper around
PyObject_GenericGetAttr().
XXX A problem here is that this is a case of *delegation*. dir()
doesn't see exactly the same attributes that are actually defined;
e.g. if the delegate is a Python function object, it supports
attributes like func_code etc., but these are not visible to dir(); on
the other hand, dynamic function attributes (stored in the function's
__dict__) *are* visible to dir(). Maybe we need a mechanism to tell
dir() about the delegation mechanism? I vaguely recall seeing a
request in the newsgroup for a more formal definition of attribute
delegation too. Sigh, time for a new PEP.
and are lists, and then just the string elements (if any)).
There are good and bad reasons for this. The good reason is to support
dir() "like before" on objects of extension types that haven't migrated
to the class introspection API yet. The bad reason is that Python's own
method objects are such a type, and this is the quickest way to get their
im_self etc attrs to "show up" via dir(). It looks much messier to move
them to the new scheme, as their current getattr implementation presents
a view of their attrs that's a untion of their own attrs plus their
im_func's attrs. In particular, methodobject.__dict__ actually returns
methodobject.im_func.__dict__, and if that's important to preserve it
doesn't seem to fit the class introspection model at all.
Both int and long multiplication are changed to be more careful in
their assumptions about when one of the arguments is a sequence: the
assumption that at least one of the arguments must be an int (or long,
respectively) is still held, but the assumption that these don't smell
like sequences is no longer true: a subtype of int or long may well
have a sequence-repeat thingie!
NotImplemented when the lookup fails, and use this for binary
operators. Also lookup_maybe() which doesn't raise an exception when
the lookup fails (still returning NULL).
- Don't turn a non-tuple argument into a one-tuple. Rather, the
caller must pass a format that causes Py_VaBuildValue() to return a
tuple.
- Speed things up by calling PyObject_Call (which is fairly low-level
and straightforward) rather than PyObject_CallObject (which calls
PyEval_CallObjectWithKeywords which calls PyObject_Call, and nothing
is really done in the mean time except some tests for NULL args and
valid types, which are already guaranteed).
- Cosmetics.
Other places:
- Make sure that the format argument to call_method() is surrounded by
parentheses, so it will cause a tuple to be created.
- Replace a few calls to PyEval_CallObject() with a surefire tuple for
args to calls to PyObject_Call(). (A few calls to
PyEval_CallObject() remain that have NULL for args.)
directly, as the only thing done here (replace NULL args with an empty
tuple) is also done there.
XXX Maybe we should take one step further and equate the two at the
macro level? That's harder though because PyEval_Call* is declared in
a header that's not included standard. But it is silly that
PyObject_CallObject calls PyEval_CallObject which calls back to
PyObject_Call. Maybe PyEval_CallObject should be moved into this file
instead? All I know is that there are too many call APIs! The
differences between PyObject_Call and PyEval_CallObjectWithKeywords is
that the latter allows args to be NULL, and does explicit type checks
for args and kwds.
A surprising number of changes to split tp_new into tp_new and tp_init.
Turned out the older PyFile_FromFile() didn't initialize the memory it
allocated in all (error) cases, which caused new sanity asserts
elsewhere to fail left & right (and could have, e.g., caused file_dealloc
to try decrefing random addresses).
keys are true strings -- no subclasses need apply. This may be debatable.
The problem is that a str subclass may very well want to override __eq__
and/or __hash__ (see the new example of case-insensitive strings in
test_descr), but go-fast shortcuts for strings are ubiquitous in our dicts
(and subclass overrides aren't even looked for then). Another go-fast
reason for the change is that PyCheck_StringExact() is a quicker test
than PyCheck_String(), and we make such a test on virtually every access
to every dict.
OTOH, a str subclass may also be perfectly happy using the base str eq
and hash, and this change slows them a lot. But those cases are still
hypothetical, while Python's own reliance on true-string dicts is not.
just by doing type(f) where f is any file object. This left a hole in
restricted execution mode that rexec.py can't plug by itself (although it
can plug part of it; the rest is plugged in fileobject.c now).
on to the tp_new slot (if non-NULL), as well as to the tp_init slot (if
any). A sane type implementing both tp_new and tp_init should probably
pay attention to the arguments in only one of them.
with the same value instead. This ensures that a string (or string
subclass) object's ob_sinterned pointer is always a str (or NULL), and
that the dict of interned strings only has strs as keys.
+ These were leaving the hash fields at 0, which all string and unicode
routines believe is a legitimate hash code. As a result, hash() applied
to str and unicode subclass instances always returned 0, which in turn
confused dict operations, etc.
+ Changed local names "new"; no point to antagonizing C++ compilers.
subclasses, all "the usual" ones (slicing etc), plus replace, translate,
ljust, rjust, center and strip. I don't know how to be sure they've all
been caught.
Question: Should we complain if someone tries to intern an instance of
a string subclass? I hate to slow any code on those paths.
tuple(i) repaired to return a true tuple when i is an instance of a
tuple subclass.
Added PyTuple_CheckExact macro.
PySequence_Tuple(): if a tuple-like object isn't exactly a tuple, it's
not safe to return the object as-is -- make a new tuple of it instead.
Given an immutable type M, and an instance I of a subclass of M, the
constructor call M(I) was just returning I as-is; but it should return a
new instance of M. This fixes it for M in {int, long}. Strings, floats
and tuples remain to be done.
Added new macros PyInt_CheckExact and PyLong_CheckExact, to more easily
distinguish between "is" and "is a" (i.e., only an int passes
PyInt_CheckExact, while any sublass of int passes PyInt_Check).
Added private API function _PyLong_Copy.
Subtlety on Windows: if we change test_largefile.py to use a file
> 4GB, it still fails. A debug session suggests this is because
fseek(fp, 0, 2) refuses to seek to the end of the file when the file
is > 4GB, because it uses the SetFilePointer() in 32-bit mode.
But it only fails when we seek relative to the end of the file,
because in the other seek modes only calls to fgetpos() and fsetpos()
are made, which use Get/SetFilePointer() in 64-bit mode. Solution:
#ifdef MS_WInDOWS, replace the call to fseek(fp, ...) with a call to
_lseeki64(fileno(fp), ...). Make sure to call fflush(fp) first.
(XXX Could also replace the entire branch with a call to _lseeki64().
Would that be more efficient? Certainly less generated code.)
(XXX This needs more testing. I can't actually test that it works for
files >4GB on my Win98 machine, because the filesystem here won't let
me create files >=4GB at all. Tim should test this on his Win2K
machine.)
- use PyModule_Check() instead of PyObject_TypeCheck(), now we can.
- don't assert that the __dict__ gotten out of a module is always
a dictionary; check its type, and raise an exception if it's not.
iterable object. I'm not sure how that got overlooked before!
Got rid of the internal _PySequence_IterContains, introduced a new
internal _PySequence_IterSearch, and rewrote all the iteration-based
"count of", "index of", and "is the object in it or not?" routines to
just call the new function. I suppose it's slower this way, but the
code duplication was getting depressing.
the base classes is not a classic class, and its class (the metaclass)
is callable, call the metaclass to do the deed.
One effect of this is that, when mixing classic and new-style classes
amongst the bases of a class, it doesn't matter whether the first base
class is a classic class or not: you will always get the error
"TypeError: metatype conflict among bases". (Formerly, with a classic
class first, you'd get "TypeError: PyClass_New: base must be a class".)
Another effect is that multiple inheritance from ExtensionClass.Base,
with a classic class as the first class, transfers control to the
ExtensionClass.Base class. This is what we need for SF #443239 (and
also for running Zope under 2.2a4, before ExtensionClass is replaced).
corresponding "getitem" operation (sq_item or mp_subscript) is
implemented. I realize that "sequence-ness" and "mapping-ness" are
poorly defined (and the tests may still be wrong for user-defined
instances, which always have both slots filled), but I believe that a
sequence that doesn't support its getitem operation should not be
considered a sequence. All other operations are optional though.
For example, the ZODB BTree tests crashed because PySequence_Check()
returned true for a dictionary! (In 2.2, the dictionary type has a
tp_as_sequence pointer, but the only field filled is sq_contains, so
you can write "if key in dict".) With this fix, all standalone ZODB
tests succeed.
a->tp_mro. If a doesn't have class, it's considered a subclass only
of itself or of 'object'.
This one fix is enough to prevent the ExtensionClass test suite from
dumping core, but that doesn't say much (it's a rather small test
suite). Also note that for ExtensionClass-defined types, a different
subclass test may be needed. But I haven't checked whether
PyType_IsSubtype() is actually used in situations where this matters
-- probably it doesn't, since we also don't check for classic classes.
Curious: the MS docs say stati64 etc are supported even on Win95, but
Win95 doesn't support a filesystem that allows partitions > 2 Gb.
test_largefile: This was opening its test file in text mode. I have no
idea how that worked under Win64, but it sure needs binary mode on Win98.
BTW, on Win98 test_largefile runs quickly (under a second).
While not even documented, they were clearly part of the C API,
there's no great difficulty to support them, and it has the cool
effect of not requiring any changes to ExtensionClass.c.
requires that errno ever get set, and it looks like glibc is already
playing that game. New rules:
+ Never use HUGE_VAL. Use the new Py_HUGE_VAL instead.
+ Never believe errno. If overflow is the only thing you're interested in,
use the new Py_OVERFLOWED(x) macro. If you're interested in any libm
errors, use the new Py_SET_ERANGE_IF_OVERFLOW(x) macro, which attempts
to set errno the way C89 said it worked.
Unfortunately, none of these are reliable, but they work on Windows and I
*expect* under glibc too.
I believe this works on Linux (tested both on a system with large file
support and one without it), and it may work on Solaris 2.7.
The changes are twofold:
(1) The configure script now boldly tries to set the two symbols that
are recommended (for Solaris and Linux), and then tries a test
script that does some simple seeking without writing.
(2) The _portable_{fseek,ftell} functions are a little more systematic
in how they try the different large file support options: first
try fseeko/ftello, but only if off_t is large; then try
fseek64/ftell64; then try hacking with fgetpos/fsetpos.
I'm keeping my fingers crossed. The meaning of the
HAVE_LARGEFILE_SUPPORT macro is not at all clear.
I'll see if I can get it to work on Windows as well.
the fiddling is simply due to that no caller of PyLong_AsDouble ever
checked for failure (so that's fixing old bugs). PyLong_AsDouble is much
faster for big inputs now too, but that's more of a happy consequence
than a design goal.
but will be the foundation for Good Things:
+ Speed PyLong_AsDouble.
+ Give PyLong_AsDouble the ability to detect overflow.
+ Make true division of long/long nearly as accurate as possible (no
spurious infinities or NaNs).
+ Return non-insane results from math.log and math.log10 when passing a
long that can't be approximated by a double better than HUGE_VAL.
mapping object", in the same sense dict.update(x) requires of x (that x
has a keys() method and a getitem).
Questionable: The other type constructors accept a keyword argument, so I
did that here too (e.g., dictionary(mapping={1:2}) works). But type_call
doesn't pass the keyword args to the tp_new slot (it passes NULL), it only
passes them to the tp_init slot, so getting at them required adding a
tp_init slot to dicts. Looks like that makes the normal case (i.e., no
args at all) a little slower (the time it takes to call dict.tp_init and
have it figure out there's nothing to do).
PEP 238. Changes:
- add a new flag variable Py_DivisionWarningFlag, declared in
pydebug.h, defined in object.c, set in main.c, and used in
{int,long,float,complex}object.c. When this flag is set, the
classic division operator issues a DeprecationWarning message.
- add a new API PyRun_SimpleStringFlags() to match
PyRun_SimpleString(). The main() function calls this so that
commands run with -c can also benefit from -Dnew.
- While I was at it, I changed the usage message in main() somewhat:
alphabetized the options, split it in *four* parts to fit in under
512 bytes (not that I still believe this is necessary -- doc strings
elsewhere are much longer), and perhaps most visibly, don't display
the full list of options on each command line error. Instead, the
full list is only displayed when -h is used, and otherwise a brief
reminder of -h is displayed. When -h is used, write to stdout so
that you can do `python -h | more'.
Notes:
- I don't want to use the -W option to control whether the classic
division warning is issued or not, because the machinery to decide
whether to display the warning or not is very expensive (it involves
calling into the warnings.py module). You can use -Werror to turn
the warnings into exceptions though.
- The -Dnew option doesn't select future division for all of the
program -- only for the __main__ module. I don't know if I'll ever
change this -- it would require changes to the .pyc file magic
number to do it right, and a more global notion of compiler flags.
- You can usefully combine -Dwarn and -Dnew: this gives the __main__
module new division, and warns about classic division everywhere
else.
__dict__ slot for string subtypes.
subtype_dealloc(): properly use _PyObject_GetDictPtr() to get the
(potentially negative) dict offset. Don't copy things into local
variables that are used only once.
type_new(): properly calculate a negative dict offset when tp_itemsize
is nonzero. The __dict__ attribute, if present, is now a calculated
attribute rather than a structure member.
tupledealloc(): only feed the free list when the type is really a
tuple, not a subtype. Otherwise, use PyObject_GC_Del().
_PyTuple_Resize(): disallow using this for tuple subtypes.
don't use getattr, but only look in the dict of the type and base types.
This prevents picking up all sorts of weird stuff, including things defined
by the metaclass when the object is a class (type).
For this purpose, a helper function lookup_method() was added. One or two
other places also use this.
PyString_FromFormatV(): In the final resize at the end, we can use
PyString_AS_STRING() since we know the object is a string and can
avoid the typechecking.
PyString_FromFormat(): GS sez: "For safety/propriety, you should call
va_end() on the vargs variable."
at least in the first two characters. %p is ill-defined, and people will
forever commit bad tests otherwise ("bad" in the sense that they fall
over (at least on Windows) for lack of a leading '0x'; 5 of the 7 tests
in test_repr.py failed on Windows for that reason this time around).
an inappropriate first argument. Now that there are more ways for
this to fail, make sure to report the name of the class of the
expected instance and of the actual instance.
PyErr_Format() these new C API methods can be used instead of
sprintf()'s into hardcoded char* buffers. This allows us to fix
many situation where long package, module, or class names get
truncated in reprs.
PyString_FromFormat() is the varargs variety.
PyString_FromFormatV() is the va_list variety
Original PyErr_Format() code was modified to allow %p and %ld
expansions.
Many reprs were converted to this, checkins coming soo. Not
changed: complex_repr(), float_repr(), float_print(), float_str(),
int_repr(). There may be other candidates not yet converted.
Closes patch #454743.
super(type) -> unbound super object
super(type, obj) -> bound super object; requires isinstance(obj, type)
Typical use to call a cooperative superclass method:
class C(B):
def meth(self, arg):
super(C, self).meth(arg);
the delete function. (Question: should the attribute name also be
recorded in the getset object? That makes the protocol more work, but
may give us better error messages.)
cases.
powu: Deleted.
This started with a nonsensical error msg:
>>> x = -1.
>>> import sys
>>> x**(-sys.maxint-1L)
Traceback (most recent call last):
File "<stdin>", line 1, in ?
ValueError: negative number cannot be raised to a fractional power
>>>
The special-casing in float_pow was simply wrong in this case (there's
not even anything peculiar about these inputs), and I don't see any point
to it in *any* case: a decent libm pow should have worst-case error under
1 ULP, so in particular should deliver the exact result whenever the exact
result is representable (else its error is at least 1 ULP). Thus our
special fiddling for integral values "shouldn't" buy anything in accuracy,
and, to the contrary, repeated multiplication is less accurate than a
decent pow when the true result isn't exactly representable. So just
letting pow() do its job here (we may not be able to trust libm x-platform
in exceptional cases, but these are normal cases).
interpretation of negative indices, since neither the sq_*item slots
nor the slot_ wrappers do this. (Slices are a different story, there
the size wrapping is done too early.)
Classes that don't use __slots__ have a __weakref__ member added in
the same way as __dict__ is added (i.e. only if the base didn't
already have one). Classes using __slots__ can enable weak
referenceability by adding '__weakref__' to the __slots__ list.
Renamed the __weaklistoffset__ class member to __weakrefoffset__ --
it's not always a list, it seems. (Is tp_weaklistoffset a historical
misnomer, or do I misunderstand this?)
- Do not compile unicodeobject, unicodectype, and unicodedata if Unicode is disabled
- check for Py_USING_UNICODE in all places that use Unicode functions
- disables unicode literals, and the builtin functions
- add the types.StringTypes list
- remove Unicode literals from most tests.
the class dict). Anything but a nonnegative int in either place is
*ignored* (before, a non-Boolean was an error). The default is still
static -- in a comparative test, Jeremy's Tools/compiler package ran
twice as slow (compiling itself) using dynamic as the default. (The
static version, which requires a few tweaks to avoid modifying class
variables, runs at about the same speed as the classic version.)
slot_tp_descr_get(): this also needed fallback behavior.
slot_tp_getattro(): remove a debug fprintf() call.
the metatype passed in as an argument. This prevents infinite
recursion when a metatype written in Python calls type.__new__() as a
"super" call.
Also tweaked some comments.
calculate it on the fly. This way even modules with long package
names get an accurate repr instead of a truncated one. The extra
malloc/free cost shouldn't be a problem in a repr function.
Closes SF bug #437984
- type_module(), type_name(): if tp_name contains one or more period,
the part before the last period is __module__, the part after that
is __name__. Otherwise, for non-heap types, __module__ is
"__builtin__". For heap types, __module__ is looked up in
tp_defined.
- type_new(): heap types have their __module__ set from
globals().__name__; a pre-existing __module__ in their dict is not
overridden. This is not inherited.
- type_repr(): if __module__ exists and is not "__builtin__", it is
included in the string representation (just as it already is for
classes). For example <type '__main__.C'>.
- descrobject.c:descr_check(): only believe None means the same as
NULL if the type given is None's type.
- typeobject.c:wrap_descr_get(): don't "conventiently" default an
absent type to the type of the object argument. Let the called
function figure it out.
types -- currently Type, List, None and NotImplemented. To be called
from Py_Initialize() instead of accumulating calls there.
Also rename type(None) to NoneType and type(NotImplemented) to
NotImplementedType -- naming the type identical to the object was
confusing.
returns that. (This fix is also by MvL; checkin it in because I want
to make more changes here. I'm still not 100% satisfied -- see
comments attached to the patch.)
operators for which a default implementation exist now work, both in
dynamic classes and in static classes, overridden or not. This
affects __repr__, __str__, __hash__, __contains__, __nonzero__,
__cmp__, and the rich comparisons (__lt__ etc.). For dynamic
classes, this meant copying a lot of code from classobject! (XXX
There are still some holes, because the comparison code in object.c
uses PyInstance_Check(), meaning new-style classes don't get the
same dispensation. This needs more thinking.)
- Add object.__hash__, object.__repr__, object.__str__. The __str__
dispatcher now calls the __repr__ dispatcher, as it should.
- For static classes, the tp_compare, tp_richcompare and tp_hash slots
are now inherited together, or not at all. (XXX I fear there are
still some situations where you can inherit __hash__ when you
shouldn't, but mostly it's OK now, and I think there's no way we can
get that 100% right.)
Neil Schemenauer
Walter Dörwald
Tim Peters
Martin v. Löwis
Guido van Rossum
Jeremy Hylton
Michael W. Hudson
Andrew MacIntyre
Marc-André Lemburg
Neal Norwitz
Fred Drake
Sjoerd Mullender
Jack Jansen
Barry Warsaw
Thomas Heller
Skip Montanaro