cpython/Doc/whatsnew/3.4.rst

2546 lines
108 KiB
ReStructuredText
Raw Normal View History

2012-09-30 04:11:58 -03:00
****************************
What's New In Python 3.4
****************************
:Author: R. David Murray <rdmurray@bitdance.com> (Editor)
2012-09-30 04:11:58 -03:00
.. Rules for maintenance:
* Anyone can add text to this document, but the maintainer reserves the
right to rewrite any additions. In particular, for obscure or esoteric
features, the maintainer may reduce any addition to a simple reference to
the new documentation rather than explaining the feature inline.
* While the maintainer will periodically go through Misc/NEWS
and add changes, it's best not to rely on this. We know from experience
that any changes that aren't in the What's New documentation around the
time of the original release will remain largely unknown to the community
for years, even if they're added later. We also know from experience that
other priorities can arise, and the maintainer will run out of time to do
updates -- in such cases, end users will be much better served by partial
notifications that at least give a hint about new features to
investigate.
2012-09-30 04:11:58 -03:00
* This is not a complete list of every single change; completeness
is the purpose of Misc/NEWS. The What's New should focus on changes that
are visible to Python *users* and that *require* a feature release (i.e.
most bug fixes should only be recorded in Misc/NEWS)
* PEPs should not be marked Final until they have an entry in What's New.
A placeholder entry that is just a section header and a link to the PEP
(e.g ":pep:`397` has been implemented") is acceptable. If a PEP has been
implemented and noted in What's New, don't forget to mark it as Final!
2012-09-30 04:11:58 -03:00
* If you want to draw your new text to the attention of the
maintainer, add 'XXX' to the beginning of the paragraph or
section.
* It's OK to add just a very brief note about a change. For
example: "The :ref:`~socket.transmogrify()` function was added to the
:mod:`socket` module." The maintainer will research the change and
write the necessary text (if appropriate). The advantage of doing this
is that even if no more descriptive text is ever added, readers will at
least have a notification that the new feature exists and a link to the
relevant documentation.
2012-09-30 04:11:58 -03:00
* You can comment out your additions if you like, but it's not
necessary (especially when a final release is some months away).
* Credit the author of a patch or bugfix. Just the name is
sufficient; the e-mail address isn't necessary.
* It's helpful to add the bug/patch number as a comment:
The :ref:`~socket.transmogrify()` function was added to the
:mod:`socket` module. (Contributed by P.Y. Developer in :issue:`12345`.)
2012-09-30 04:11:58 -03:00
This saves the maintainer the effort of going through the Mercurial log
when researching a change.
* Cross referencing tip: :ref:`mod.attr` will display as ``mod.attr``,
while :ref:`~mod.attr` will display as ``attr``.
2012-09-30 04:11:58 -03:00
This article explains the new features in Python 3.4, compared to 3.3.
Python 3.4 was released on March 16, 2014. For full details, see the
`changelog <https://docs.python.org/3.4/whatsnew/changelog.html>`_.
2012-09-30 04:11:58 -03:00
.. seealso::
:pep:`429` -- Python 3.4 Release Schedule
2012-09-30 04:11:58 -03:00
Summary -- Release Highlights
2012-09-30 04:11:58 -03:00
=============================
.. This section singles out the most important changes in Python 3.4.
2012-09-30 04:11:58 -03:00
Brevity is key.
New syntax features:
* No new syntax features were added in Python 3.4.
2012-09-30 04:11:58 -03:00
Other new features:
* :ref:`pip should always be available <whatsnew-pep-453>` (:pep:`453`).
* :ref:`Newly created file descriptors are non-inheritable <whatsnew-pep-446>`
(:pep:`446`).
* command line option for :ref:`isolated mode <whatsnew-isolated-mode>`
(:issue:`16499`).
* :ref:`improvements in the handling of codecs <codec-handling-improvements>`
that are not text encodings (multiple issues).
* :ref:`A ModuleSpec Type <whatsnew-pep-451>` for the Import System
(:pep:`451`). (Affects importer authors.)
* The :mod:`marshal` format has been made :ref:`more compact and efficient
<whatsnew-marshal-3>` (:issue:`16475`).
2012-09-30 04:11:58 -03:00
New library modules:
* :mod:`asyncio`: :ref:`New provisional API for asynchronous IO
<whatsnew-asyncio>` (:pep:`3156`).
* :mod:`ensurepip`: :ref:`Bootstrapping the pip installer <whatsnew-ensurepip>`
(:pep:`453`).
* :mod:`enum`: :ref:`Support for enumeration types <whatsnew-enum>`
(:pep:`435`).
* :mod:`pathlib`: :ref:`Object-oriented filesystem paths <whatsnew-pathlib>`
(:pep:`428`).
* :mod:`selectors`: :ref:`High-level and efficient I/O multiplexing
<whatsnew-selectors>`, built upon the :mod:`select` module primitives (part
of :pep:`3156`).
* :mod:`statistics`: A basic :ref:`numerically stable statistics library
<whatsnew-statistics>` (:pep:`450`).
* :mod:`tracemalloc`: :ref:`Trace Python memory allocations
<whatsnew-tracemalloc>` (:pep:`454`).
2012-09-30 04:11:58 -03:00
Significantly improved library modules:
2012-09-30 04:11:58 -03:00
* :ref:`Single-dispatch generic functions <whatsnew-singledispatch>` in
:mod:`functools` (:pep:`443`).
* New :mod:`pickle` :ref:`protocol 4 <whatsnew-protocol-4>` (:pep:`3154`).
* :mod:`multiprocessing` now has :ref:`an option to avoid using os.fork
on Unix <whatsnew-multiprocessing-no-fork>` (:issue:`8713`).
* :mod:`email` has a new submodule, :mod:`~email.contentmanager`, and
a new :mod:`~email.message.Message` subclass
(:class:`~email.contentmanager.EmailMessage`) that :ref:`simplify MIME
handling <whatsnew_email_contentmanager>` (:issue:`18891`).
* The :mod:`inspect` and :mod:`pydoc` modules are now capable of
correct introspection of a much wider variety of callable objects,
which improves the output of the Python :func:`help` system.
* The :mod:`ipaddress` module API has been declared stable
2013-08-12 15:46:47 -03:00
Security improvements:
* :ref:`Secure and interchangeable hash algorithm <whatsnew-pep-456>`
(:pep:`456`).
* :ref:`Make newly created file descriptors non-inheritable <whatsnew-pep-446>`
(:pep:`446`) to avoid leaking file descriptors to child processes.
* New command line option for :ref:`isolated mode <whatsnew-isolated-mode>`,
(:issue:`16499`).
* :mod:`multiprocessing` now has :ref:`an option to avoid using os.fork
on Unix <whatsnew-multiprocessing-no-fork>`. *spawn* and *forkserver* are
more secure because they avoid sharing data with child processes.
* :mod:`multiprocessing` child processes on Windows no longer inherit
all of the parent's inheritable handles, only the necessary ones.
* A new :func:`hashlib.pbkdf2_hmac` function provides
the `PKCS#5 password-based key derivation function 2
<https://en.wikipedia.org/wiki/PBKDF2>`_.
* :ref:`TLSv1.1 and TLSv1.2 support <whatsnew-tls-11-12>` for :mod:`ssl`.
* :ref:`Retrieving certificates from the Windows system cert store support
<whatsnew34-win-cert-store>` for :mod:`ssl`.
* :ref:`Server-side SNI (Server Name Indication) support
<whatsnew34-sni>` for :mod:`ssl`.
* The :class:`ssl.SSLContext` class has a :ref:`lot of improvements
<whatsnew34-sslcontext>`.
* All modules in the standard library that support SSL now support server
certificate verification, including hostname matching
(:func:`ssl.match_hostname`) and CRLs (Certificate Revocation lists, see
:func:`ssl.SSLContext.load_verify_locations`).
CPython implementation improvements:
2012-09-30 04:11:58 -03:00
* :ref:`Safe object finalization <whatsnew-pep-442>` (:pep:`442`).
* Leveraging :pep:`442`, in most cases :ref:`module globals are no longer set
2016-10-19 12:11:24 -03:00
to None during finalization <whatsnew-pep-442>` (:issue:`18214`).
* :ref:`Configurable memory allocators <whatsnew-pep-445>` (:pep:`445`).
* :ref:`Argument Clinic <whatsnew-pep-436>` (:pep:`436`).
2012-09-30 04:11:58 -03:00
Please read on for a comprehensive list of user-facing changes, including many
other smaller improvements, CPython optimizations, deprecations, and potential
porting issues.
2012-09-30 04:11:58 -03:00
New Features
============
.. _whatsnew-pep-453:
PEP 453: Explicit Bootstrapping of PIP in Python Installations
--------------------------------------------------------------
Bootstrapping pip By Default
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The new :mod:`ensurepip` module (defined in :pep:`453`) provides a standard
cross-platform mechanism to bootstrap the pip installer into Python
installations and virtual environments. The version of ``pip`` included
with Python 3.4.0 is ``pip`` 1.5.4, and future 3.4.x maintenance releases
will update the bundled version to the latest version of ``pip`` that is
available at the time of creating the release candidate.
By default, the commands ``pipX`` and ``pipX.Y`` will be installed on all
platforms (where X.Y stands for the version of the Python installation),
along with the ``pip`` Python package and its dependencies. On Windows and
in virtual environments on all platforms, the unversioned ``pip`` command
will also be installed. On other platforms, the system wide unversioned
``pip`` command typically refers to the separately installed Python 2
version.
The ``pyvenv`` command line utility and the :mod:`venv`
module make use of the :mod:`ensurepip` module to make ``pip`` readily
available in virtual environments. When using the command line utility,
``pip`` is installed by default, while when using the :mod:`venv` module
:ref:`venv-api` installation of ``pip`` must be requested explicitly.
For CPython :ref:`source builds on POSIX systems <building-python-on-unix>`,
the ``make install`` and ``make altinstall`` commands bootstrap ``pip`` by
default. This behaviour can be controlled through configure options, and
overridden through Makefile options.
On Windows and Mac OS X, the CPython installers now default to installing
``pip`` along with CPython itself (users may opt out of installing it
during the installation process). Window users will need to opt in to the
automatic ``PATH`` modifications to have ``pip`` available from the command
line by default, otherwise it can still be accessed through the Python
launcher for Windows as ``py -m pip``.
As `discussed in the PEP`__, platform packagers may choose not to install
these commands by default, as long as, when invoked, they provide clear and
simple directions on how to install them on that platform (usually using
the system package manager).
__ https://www.python.org/dev/peps/pep-0453/#recommendations-for-downstream-distributors
.. note::
To avoid conflicts between parallel Python 2 and Python 3 installations,
only the versioned ``pip3`` and ``pip3.4`` commands are bootstrapped by
default when ``ensurepip`` is invoked directly - the ``--default-pip``
option is needed to also request the unversioned ``pip`` command.
``pyvenv`` and the Windows installer ensure that the unqualified ``pip``
command is made available in those environments, and ``pip`` can always be
invoked via the ``-m`` switch rather than directly to avoid ambiguity on
systems with multiple Python installations.
Documentation Changes
~~~~~~~~~~~~~~~~~~~~~
As part of this change, the :ref:`installing-index` and
:ref:`distributing-index` sections of the documentation have been
completely redesigned as short getting started and FAQ documents. Most
packaging documentation has now been moved out to the Python Packaging
Authority maintained `Python Packaging User Guide
<https://packaging.python.org>`__ and the documentation of the individual
projects.
However, as this migration is currently still incomplete, the legacy
versions of those guides remaining available as :ref:`install-index`
and :ref:`distutils-index`.
.. seealso::
:pep:`453` -- Explicit bootstrapping of pip in Python installations
PEP written by Donald Stufft and Nick Coghlan, implemented by
Donald Stufft, Nick Coghlan, Martin von Löwis and Ned Deily.
.. _whatsnew-pep-446:
PEP 446: Newly Created File Descriptors Are Non-Inheritable
-----------------------------------------------------------
:pep:`446` makes newly created file descriptors :ref:`non-inheritable
<fd_inheritance>`. In general, this is the behavior an application will
want: when launching a new process, having currently open files also
open in the new process can lead to all sorts of hard to find bugs,
and potentially to security issues.
However, there are occasions when inheritance is desired. To support
these cases, the following new functions and methods are available:
* :func:`os.get_inheritable`, :func:`os.set_inheritable`
* :func:`os.get_handle_inheritable`, :func:`os.set_handle_inheritable`
* :meth:`socket.socket.get_inheritable`, :meth:`socket.socket.set_inheritable`
.. seealso::
:pep:`446` -- Make newly created file descriptors non-inheritable
PEP written and implemented by Victor Stinner.
2012-09-30 04:11:58 -03:00
.. _codec-handling-improvements:
Improvements to Codec Handling
------------------------------
Since it was first introduced, the :mod:`codecs` module has always been
intended to operate as a type-neutral dynamic encoding and decoding
system. However, its close coupling with the Python text model, especially
the type restricted convenience methods on the builtin :class:`str`,
:class:`bytes` and :class:`bytearray` types, has historically obscured that
fact.
As a key step in clarifying the situation, the :meth:`codecs.encode` and
:meth:`codecs.decode` convenience functions are now properly documented in
Python 2.7, 3.3 and 3.4. These functions have existed in the :mod:`codecs`
module (and have been covered by the regression test suite) since Python 2.4,
but were previously only discoverable through runtime introspection.
Unlike the convenience methods on :class:`str`, :class:`bytes` and
:class:`bytearray`, the :mod:`codecs` convenience functions support arbitrary
codecs in both Python 2 and Python 3, rather than being limited to Unicode text
encodings (in Python 3) or ``basestring`` <-> ``basestring`` conversions (in
Python 2).
In Python 3.4, the interpreter is able to identify the known non-text
encodings provided in the standard library and direct users towards these
general purpose convenience functions when appropriate::
>>> b"abcdef".decode("hex")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
LookupError: 'hex' is not a text encoding; use codecs.decode() to handle arbitrary codecs
>>> "hello".encode("rot13")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
LookupError: 'rot13' is not a text encoding; use codecs.encode() to handle arbitrary codecs
>>> open("foo.txt", encoding="hex")
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
LookupError: 'hex' is not a text encoding; use codecs.open() to handle arbitrary codecs
In a related change, whenever it is feasible without breaking backwards
compatibility, exceptions raised during encoding and decoding operations
are wrapped in a chained exception of the same type that mentions the
name of the codec responsible for producing the error::
>>> import codecs
>>> codecs.decode(b"abcdefgh", "hex")
Traceback (most recent call last):
File "/usr/lib/python3.4/encodings/hex_codec.py", line 20, in hex_decode
return (binascii.a2b_hex(input), len(input))
binascii.Error: Non-hexadecimal digit found
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
binascii.Error: decoding with 'hex' codec failed (Error: Non-hexadecimal digit found)
>>> codecs.encode("hello", "bz2")
Traceback (most recent call last):
File "/usr/lib/python3.4/encodings/bz2_codec.py", line 17, in bz2_encode
return (bz2.compress(input), len(input))
File "/usr/lib/python3.4/bz2.py", line 498, in compress
return comp.compress(data) + comp.flush()
TypeError: 'str' does not support the buffer interface
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
TypeError: encoding with 'bz2' codec failed (TypeError: 'str' does not support the buffer interface)
Finally, as the examples above show, these improvements have permitted
the restoration of the convenience aliases for the non-Unicode codecs that
were themselves restored in Python 3.2. This means that encoding binary data
to and from its hexadecimal representation (for example) can now be written
as::
>>> from codecs import encode, decode
>>> encode(b"hello", "hex")
b'68656c6c6f'
>>> decode(b"68656c6c6f", "hex")
b'hello'
The binary and text transforms provided in the standard library are detailed
in :ref:`binary-transforms` and :ref:`text-transforms`.
(Contributed by Nick Coghlan in :issue:`7475`, :issue:`17827`,
:issue:`17828` and :issue:`19619`.)
.. _whatsnew-pep-451:
2013-11-22 12:05:39 -04:00
PEP 451: A ModuleSpec Type for the Import System
------------------------------------------------
2013-11-22 12:05:39 -04:00
2013-12-22 22:06:13 -04:00
:pep:`451` provides an encapsulation of the information about a module that the
import machinery will use to load it (that is, a module specification). This
helps simplify both the import implementation and several import-related APIs.
The change is also a stepping stone for `several future import-related
improvements`__.
2013-11-22 12:05:39 -04:00
__ https://mail.python.org/pipermail/python-dev/2013-November/130111.html
2013-11-22 12:05:39 -04:00
The public-facing changes from the PEP are entirely backward-compatible.
2013-12-22 22:06:13 -04:00
Furthermore, they should be transparent to everyone but importer authors. Key
finder and loader methods have been deprecated, but they will continue working.
New importers should use the new methods described in the PEP. Existing
importers should be updated to implement the new methods. See the
:ref:`deprecated-3.4` section for a list of methods that should be replaced and
their replacements.
2013-11-22 12:05:39 -04:00
2012-09-30 04:11:58 -03:00
Other Language Changes
----------------------
2012-09-30 04:11:58 -03:00
Some smaller changes made to the core Python language are:
* Unicode database updated to UCD version 6.3.
2012-09-30 04:11:58 -03:00
* :func:`min` and :func:`max` now accept a *default* keyword-only argument that
can be used to specify the value they return if the iterable they are
evaluating has no elements. (Contributed by Julian Berman in
:issue:`18111`.)
2012-09-30 04:11:58 -03:00
2013-08-12 15:46:47 -03:00
* Module objects are now :mod:`weakref`'able.
2013-10-20 00:22:21 -03:00
* Module ``__file__`` attributes (and related values) should now always
contain absolute paths by default, with the sole exception of
``__main__.__file__`` when a script has been executed directly using
a relative path. (Contributed by Brett Cannon in :issue:`18416`.)
2013-10-20 00:22:21 -03:00
* All the UTF-\* codecs (except UTF-7) now reject surrogates during both
encoding and decoding unless the ``surrogatepass`` error handler is used,
with the exception of the UTF-16 decoder (which accepts valid surrogate pairs)
and the UTF-16 encoder (which produces them while encoding non-BMP characters).
(Contributed by Victor Stinner, Kang-Hao (Kenny) Lu and Serhiy Storchaka in
:issue:`12892`.)
* New German EBCDIC :ref:`codec <standard-encodings>` ``cp273``. (Contributed
by Michael Bierenfeld and Andrew Kuchling in :issue:`1097797`.)
* New Ukrainian :ref:`codec <standard-encodings>` ``cp1125``. (Contributed by
Serhiy Storchaka in :issue:`19668`.)
* :class:`bytes`.join() and :class:`bytearray`.join() now accept arbitrary
buffer objects as arguments. (Contributed by Antoine Pitrou in
:issue:`15958`.)
* The :class:`int` constructor now accepts any object that has an ``__index__``
method for its *base* argument. (Contributed by Mark Dickinson in
:issue:`16772`.)
* Frame objects now have a :func:`~frame.clear` method that clears all
references to local variables from the frame. (Contributed by Antoine Pitrou
in :issue:`17934`.)
* :class:`memoryview` is now registered as a :class:`Sequence <collections.abc>`,
and supports the :func:`reversed` builtin. (Contributed by Nick Coghlan
and Claudiu Popa in :issue:`18690` and :issue:`19078`.)
* Signatures reported by :func:`help` have been modified and improved in
several cases as a result of the introduction of Argument Clinic and other
changes to the :mod:`inspect` and :mod:`pydoc` modules.
* :meth:`~object.__length_hint__` is now part of the formal language
specification (see :pep:`424`). (Contributed by Armin Ronacher in
:issue:`16148`.)
2012-09-30 04:11:58 -03:00
2012-09-30 04:11:58 -03:00
New Modules
===========
2013-10-20 00:22:21 -03:00
.. _whatsnew-asyncio:
2013-10-20 00:22:21 -03:00
asyncio
-------
The new :mod:`asyncio` module (defined in :pep:`3156`) provides a standard
pluggable event loop model for Python, providing solid asynchronous IO
support in the standard library, and making it easier for other event loop
implementations to interoperate with the standard library and each other.
For Python 3.4, this module is considered a :term:`provisional API`.
.. seealso::
:pep:`3156` -- Asynchronous IO Support Rebooted: the "asyncio" Module
PEP written and implementation led by Guido van Rossum.
.. _whatsnew-ensurepip:
ensurepip
---------
The new :mod:`ensurepip` module is the primary infrastructure for the
:pep:`453` implementation. In the normal course of events end users will not
need to interact with this module, but it can be used to manually bootstrap
``pip`` if the automated bootstrapping into an installation or virtual
environment was declined.
:mod:`ensurepip` includes a bundled copy of ``pip``, up-to-date as of the first
release candidate of the release of CPython with which it ships (this applies
to both maintenance releases and feature releases). ``ensurepip`` does not
access the internet. If the installation has Internet access, after
``ensurepip`` is run the bundled ``pip`` can be used to upgrade ``pip`` to a
more recent release than the bundled one. (Note that such an upgraded version
of ``pip`` is considered to be a separately installed package and will not be
removed if Python is uninstalled.)
The module is named *ensure*\ pip because if called when ``pip`` is already
installed, it does nothing. It also has an ``--upgrade`` option that will
cause it to install the bundled copy of ``pip`` if the existing installed
version of ``pip`` is older than the bundled copy.
.. _whatsnew-enum:
2013-10-20 00:22:21 -03:00
enum
----
The new :mod:`enum` module (defined in :pep:`435`) provides a standard
implementation of enumeration types, allowing other modules (such as
:mod:`socket`) to provide more informative error messages and better
debugging support by replacing opaque integer constants with backwards
compatible enumeration values.
.. seealso::
:pep:`435` -- Adding an Enum type to the Python standard library
PEP written by Barry Warsaw, Eli Bendersky and Ethan Furman,
implemented by Ethan Furman.
2013-10-20 00:22:21 -03:00
.. _whatsnew-pathlib:
pathlib
-------
The new :mod:`pathlib` module offers classes representing filesystem paths
with semantics appropriate for different operating systems. Path classes are
divided between *pure paths*, which provide purely computational operations
without I/O, and *concrete paths*, which inherit from pure paths but also
provide I/O operations.
For Python 3.4, this module is considered a :term:`provisional API`.
.. seealso::
:pep:`428` -- The pathlib module -- object-oriented filesystem paths
PEP written and implemented by Antoine Pitrou.
.. _whatsnew-selectors:
selectors
---------
2012-09-30 04:11:58 -03:00
2013-10-20 00:22:21 -03:00
The new :mod:`selectors` module (created as part of implementing :pep:`3156`)
allows high-level and efficient I/O multiplexing, built upon the
:mod:`select` module primitives.
.. _whatsnew-statistics:
2013-10-20 00:22:21 -03:00
statistics
----------
The new :mod:`statistics` module (defined in :pep:`450`) offers some core
statistics functionality directly in the standard library. This module
supports calculation of the mean, median, mode, variance and standard
deviation of a data series.
2012-09-30 04:11:58 -03:00
.. seealso::
:pep:`450` -- Adding A Statistics Module To The Standard Library
PEP written and implemented by Steven D'Aprano
.. _whatsnew-tracemalloc:
2012-09-30 04:11:58 -03:00
tracemalloc
-----------
The new :mod:`tracemalloc` module (defined in :pep:`454`) is a debug tool to
trace memory blocks allocated by Python. It provides the following information:
* Trace where an object was allocated
* Statistics on allocated memory blocks per filename and per line number:
total size, number and average size of allocated memory blocks
* Compute the differences between two snapshots to detect memory leaks
.. seealso::
:pep:`454` -- Add a new tracemalloc module to trace Python memory allocations
PEP written and implemented by Victor Stinner
2012-09-30 04:11:58 -03:00
Improved Modules
================
abc
---
New function :func:`abc.get_cache_token` can be used to know when to invalidate
caches that are affected by changes in the object graph. (Contributed
by Łukasz Langa in :issue:`16832`.)
New class :class:`~abc.ABC` has :class:`~abc.ABCMeta` as its meta class.
Using ``ABC`` as a base class has essentially the same effect as specifying
``metaclass=abc.ABCMeta``, but is simpler to type and easier to read.
(Contributed by Bruno Dupuis in :issue:`16049`.)
2013-08-12 15:48:15 -03:00
aifc
----
The :meth:`~aifc.aifc.getparams` method now returns a namedtuple rather than a
2013-08-12 15:48:15 -03:00
plain tuple. (Contributed by Claudiu Popa in :issue:`17818`.)
:func:`aifc.open` now supports the context management protocol: when used in a
2013-12-31 14:45:38 -04:00
:keyword:`with` block, the :meth:`~aifc.aifc.close` method of the returned
object will be called automatically at the end of the block. (Contributed by
Serhiy Storchacha in :issue:`16486`.)
The :meth:`~aifc.aifc.writeframesraw` and :meth:`~aifc.aifc.writeframes`
methods now accept any :term:`bytes-like object`. (Contributed by Serhiy
Storchaka in :issue:`8311`.)
2013-08-12 15:48:15 -03:00
argparse
--------
The :class:`~argparse.FileType` class now accepts *encoding* and
*errors* arguments, which are passed through to :func:`open`. (Contributed
by Lucas Maystre in :issue:`11175`.)
audioop
-------
:mod:`audioop` now supports 24-bit samples. (Contributed by Serhiy Storchaka
in :issue:`12866`.)
New :func:`~audioop.byteswap` function converts big-endian samples to
little-endian and vice versa. (Contributed by Serhiy Storchaka in
:issue:`19641`.)
All :mod:`audioop` functions now accept any :term:`bytes-like object`. Strings
are not accepted: they didn't work before, now they raise an error right away.
(Contributed by Serhiy Storchaka in :issue:`16685`.)
base64
------
The encoding and decoding functions in :mod:`base64` now accept any
:term:`bytes-like object` in cases where it previously required a
:class:`bytes` or :class:`bytearray` instance. (Contributed by Nick Coghlan in
:issue:`17839`.)
New functions :func:`~base64.a85encode`, :func:`~base64.a85decode`,
:func:`~base64.b85encode`, and :func:`~base64.b85decode` provide the ability to
encode and decode binary data from and to ``Ascii85`` and the git/mercurial
``Base85`` formats, respectively. The ``a85`` functions have options that can
be used to make them compatible with the variants of the ``Ascii85`` encoding,
including the Adobe variant. (Contributed by Martin Morrison, the Mercurial
project, Serhiy Storchaka, and Antoine Pitrou in :issue:`17618`.)
collections
-----------
The :meth:`.ChainMap.new_child` method now accepts an *m* argument specifying
the child map to add to the chain. This allows an existing mapping and/or a
custom mapping type to be used for the child. (Contributed by Vinay Sajip in
:issue:`16613`.)
2013-08-12 15:48:15 -03:00
colorsys
--------
The number of digits in the coefficients for the RGB --- YIQ conversions have
been expanded so that they match the FCC NTSC versions. The change in
results should be less than 1% and may better match results found elsewhere.
(Contributed by Brian Landers and Serhiy Storchaka in :issue:`14323`.)
2013-08-12 15:48:15 -03:00
2013-10-13 10:23:08 -03:00
contextlib
----------
The new :class:`contextlib.suppress` context manager helps to clarify the
intent of code that deliberately suppresses exceptions from a single
statement. (Contributed by Raymond Hettinger in :issue:`15806` and
Zero Piraeus in :issue:`19266`.)
2013-10-21 08:27:11 -03:00
The new :func:`contextlib.redirect_stdout` context manager makes it easier
for utility scripts to handle inflexible APIs that write their output to
:data:`sys.stdout` and don't provide any options to redirect it. Using the
context manager, the :data:`sys.stdout` output can be redirected to any
other stream or, in conjunction with :class:`io.StringIO`, to a string.
The latter can be especially useful, for example, to capture output
from a function that was written to implement a command line interface.
It is recommended only for utility scripts because it affects the
global state of :data:`sys.stdout`. (Contributed by Raymond Hettinger
in :issue:`15805`.)
2013-10-20 00:22:21 -03:00
The :mod:`contextlib` documentation has also been updated to include a
:ref:`discussion <single-use-reusable-and-reentrant-cms>` of the
differences between single use, reusable and reentrant context managers.
2013-10-13 10:23:08 -03:00
dbm
---
:func:`dbm.open` objects now support the context management protocol. When
used in a :keyword:`with` statement, the ``close`` method of the database
object will be called automatically at the end of the block. (Contributed by
Claudiu Popa and Nick Coghlan in :issue:`19282`.)
dis
---
Functions :func:`~dis.show_code`, :func:`~dis.dis`, :func:`~dis.distb`, and
:func:`~dis.disassemble` now accept a keyword-only *file* argument that
controls where they write their output.
The :mod:`dis` module is now built around an :class:`~dis.Instruction` class
that provides object oriented access to the details of each individual bytecode
operation.
A new method, :func:`~dis.get_instructions`, provides an iterator that emits
the Instruction stream for a given piece of Python code. Thus it is now
possible to write a program that inspects and manipulates a bytecode
object in ways different from those provided by the :mod:`~dis` module
itself. For example::
>>> import dis
>>> for instr in dis.get_instructions(lambda x: x + 1):
... print(instr.opname)
LOAD_FAST
LOAD_CONST
BINARY_ADD
RETURN_VALUE
The various display tools in the :mod:`dis` module have been rewritten to use
these new components.
In addition, a new application-friendly class :class:`~dis.Bytecode` provides
an object-oriented API for inspecting bytecode in both in human-readable form
and for iterating over instructions. The :class:`~dis.Bytecode` constructor
takes the same arguments that :func:`~dis.get_instruction` does (plus an
optional *current_offset*), and the resulting object can be iterated to produce
:class:`~dis.Instruction` objects. But it also has a :mod:`~dis.Bytecode.dis`
method, equivalent to calling :mod:`~dis.dis` on the constructor argument, but
returned as a multi-line string::
>>> bytecode = dis.Bytecode(lambda x: x + 1, current_offset=3)
>>> for instr in bytecode:
... print('{} ({})'.format(instr.opname, instr.opcode))
LOAD_FAST (124)
LOAD_CONST (100)
BINARY_ADD (23)
RETURN_VALUE (83)
>>> bytecode.dis().splitlines() # doctest: +NORMALIZE_WHITESPACE
[' 1 0 LOAD_FAST 0 (x)',
' --> 3 LOAD_CONST 1 (1)',
' 6 BINARY_ADD',
' 7 RETURN_VALUE']
:class:`~dis.Bytecode` also has a class method,
:meth:`~dis.Bytecode.from_traceback`, that provides the ability to manipulate a
traceback (that is, ``print(Bytecode.from_traceback(tb).dis())`` is equivalent
to ``distb(tb)``).
(Contributed by Nick Coghlan, Ryan Kelly and Thomas Kluyver in :issue:`11816`
and Claudiu Popa in :issue:`17916`.)
New function :func:`~dis.stack_effect` computes the effect on the Python stack
of a given opcode and argument, information that is not otherwise available.
(Contributed by Larry Hastings in :issue:`19722`.)
2013-08-12 15:48:15 -03:00
doctest
-------
A new :ref:`option flag <doctest-options>`, :data:`~doctest.FAIL_FAST`, halts
test running as soon as the first failure is detected. (Contributed by R.
David Murray and Daniel Urban in :issue:`16522`.)
The :mod:`doctest` command line interface now uses :mod:`argparse`, and has two
new options, ``-o`` and ``-f``. ``-o`` allows :ref:`doctest options
<doctest-options>` to be specified on the command line, and ``-f`` is a
shorthand for ``-o FAIL_FAST`` (to parallel the similar option supported by the
:mod:`unittest` CLI). (Contributed by R. David Murray in :issue:`11390`.)
2012-09-30 04:11:58 -03:00
:mod:`doctest` will now find doctests in extension module ``__doc__`` strings.
(Contributed by Zachary Ware in :issue:`3158`.)
email
-----
:meth:`~email.message.Message.as_string` now accepts a *policy* argument to
override the default policy of the message when generating a string
representation of it. This means that ``as_string`` can now be used in more
circumstances, instead of having to create and use a :mod:`~email.generator` in
order to pass formatting parameters to its ``flatten`` method. (Contributed by
R. David Murray in :issue:`18600`.)
New method :meth:`~email.message.Message.as_bytes` added to produce a bytes
representation of the message in a fashion similar to how ``as_string``
produces a string representation. It does not accept the *maxheaderlen*
argument, but does accept the *unixfrom* and *policy* arguments. The
:class:`~email.message.Message` :meth:`~email.message.Message.__bytes__` method
calls it, meaning that ``bytes(mymsg)`` will now produce the intuitive
result: a bytes object containing the fully formatted message. (Contributed
by R. David Murray in :issue:`18600`.)
The :meth:`.Message.set_param` message now accepts a *replace* keyword argument.
When specified, the associated header will be updated without changing
its location in the list of headers. For backward compatibility, the default
is ``False``. (Contributed by R. David Murray in :issue:`18891`.)
.. _whatsnew_email_contentmanager:
A pair of new subclasses of :class:`~email.message.Message` have been added
(:class:`.EmailMessage` and :class:`.MIMEPart`), along with a new sub-module,
:mod:`~email.contentmanager` and a new :mod:`~email.policy` attribute
:attr:`~email.policy.EmailPolicy.content_manager`. All documentation is
currently in the new module, which is being added as part of email's new
:term:`provisional API`. These classes provide a number of new methods that
make extracting content from and inserting content into email messages much
easier. For details, see the :mod:`~email.contentmanager` documentation and
the :ref:`email-examples`. These API additions complete the
bulk of the work that was planned as part of the email6 project. The currently
provisional API is scheduled to become final in Python 3.5 (possibly with a few
minor additions in the area of error handling). (Contributed by R. David
Murray in :issue:`18891`.)
filecmp
-------
A new :func:`~filecmp.clear_cache` function provides the ability to clear the
:mod:`filecmp` comparison cache, which uses :func:`os.stat` information to
determine if the file has changed since the last compare. This can be used,
for example, if the file might have been changed and re-checked in less time
than the resolution of a particular filesystem's file modification time field.
(Contributed by Mark Levitt in :issue:`18149`.)
New module attribute :data:`~filecmp.DEFAULT_IGNORES` provides the list of
directories that are used as the default value for the *ignore* parameter of
the :func:`~filecmp.dircmp` function. (Contributed by Eli Bendersky in
:issue:`15442`.)
functools
---------
2014-01-31 13:17:53 -04:00
The new :func:`~functools.partialmethod` descriptor brings partial argument
application to descriptors, just as :func:`~functools.partial` provides
for normal callables. The new descriptor also makes it easier to get
arbitrary callables (including :func:`~functools.partial` instances)
to behave like normal instance methods when included in a class definition.
(Contributed by Alon Horev and Nick Coghlan in :issue:`4331`.)
.. _whatsnew-singledispatch:
The new :func:`~functools.singledispatch` decorator brings support for
single-dispatch generic functions to the Python standard library. Where
object oriented programming focuses on grouping multiple operations on a
common set of data into a class, a generic function focuses on grouping
multiple implementations of an operation that allows it to work with
*different* kinds of data.
.. seealso::
:pep:`443` -- Single-dispatch generic functions
PEP written and implemented by Łukasz Langa.
:func:`~functools.total_ordering` now supports a return value of
:const:`NotImplemented` from the underlying comparison function. (Contributed
by Katie Miller in :issue:`10042`.)
A pure-python version of the :func:`~functools.partial` function is now in the
stdlib; in CPython it is overridden by the C accelerated version, but it is
available for other implementations to use. (Contributed by Brian Thorne in
:issue:`12428`.)
gc
--
New function :func:`~gc.get_stats` returns a list of three per-generation
dictionaries containing the collections statistics since interpreter startup.
(Contributed by Antoine Pitrou in :issue:`16351`.)
glob
----
A new function :func:`~glob.escape` provides a way to escape special characters
in a filename so that they do not become part of the globbing expansion but are
instead matched literally. (Contributed by Serhiy Storchaka in :issue:`8402`.)
hashlib
-------
A new :func:`hashlib.pbkdf2_hmac` function provides
the `PKCS#5 password-based key derivation function 2
<https://en.wikipedia.org/wiki/PBKDF2>`_. (Contributed by Christian
Heimes in :issue:`18582`.)
The :attr:`~hashlib.hash.name` attribute of :mod:`hashlib` hash objects is now
a formally supported interface. It has always existed in CPython's
:mod:`hashlib` (although it did not return lower case names for all supported
hashes), but it was not a public interface and so some other Python
implementations have not previously supported it. (Contributed by Jason R.
Coombs in :issue:`18532`.)
hmac
----
:mod:`hmac` now accepts ``bytearray`` as well as ``bytes`` for the *key*
argument to the :func:`~hmac.new` function, and the *msg* parameter to both the
:func:`~hmac.new` function and the :meth:`~hmac.HMAC.update` method now
accepts any type supported by the :mod:`hashlib` module. (Contributed
by Jonas Borgström in :issue:`18240`.)
The *digestmod* argument to the :func:`hmac.new` function may now be any hash
digest name recognized by :mod:`hashlib`. In addition, the current behavior in
which the value of *digestmod* defaults to ``MD5`` is deprecated: in a
future version of Python there will be no default value. (Contributed by
Christian Heimes in :issue:`17276`.)
With the addition of :attr:`~hmac.HMAC.block_size` and :attr:`~hmac.HMAC.name`
attributes (and the formal documentation of the :attr:`~hmac.HMAC.digest_size`
attribute), the :mod:`hmac` module now conforms fully to the :pep:`247` API.
(Contributed by Christian Heimes in :issue:`18775`.)
html
----
New function :func:`~html.unescape` function converts HTML5 character references to
the corresponding Unicode characters. (Contributed by Ezio Melotti in
:issue:`2927`.)
:class:`~html.parser.HTMLParser` accepts a new keyword argument
*convert_charrefs* that, when ``True``, automatically converts all character
references. For backward-compatibility, its value defaults to ``False``, but
it will change to ``True`` in a future version of Python, so you are invited to
set it explicitly and update your code to use this new feature. (Contributed
by Ezio Melotti in :issue:`13633`.)
The *strict* argument of :class:`~html.parser.HTMLParser` is now deprecated.
(Contributed by Ezio Melotti in :issue:`15114`.)
http
----
:meth:`~http.server.BaseHTTPRequestHandler.send_error` now accepts an
optional additional *explain* parameter which can be used to provide an
extended error description, overriding the hardcoded default if there is one.
This extended error description will be formatted using the
:attr:`~http.server.HTTP.error_message_format` attribute and sent as the body
of the error response. (Contributed by Karl Cow in :issue:`12921`.)
The :mod:`http.server` :ref:`command line interface <http-server-cli>` now has
a ``-b/--bind`` option that causes the server to listen on a specific address.
(Contributed by Malte Swart in :issue:`17764`.)
2015-05-23 19:13:14 -03:00
idlelib and IDLE
----------------
Since idlelib implements the IDLE shell and editor and is not intended for
import by other programs, it gets improvements with every release. See
:file:`Lib/idlelib/NEWS.txt` for a cumulative list of changes since 3.3.0,
as well as changes made in future 3.4.x releases. This file is also available
2015-09-13 15:05:37 -03:00
from the IDLE :menuselection:`Help --> About IDLE` dialog.
2015-05-23 19:13:14 -03:00
importlib
---------
The :class:`~importlib.abc.InspectLoader` ABC defines a new method,
:meth:`~importlib.abc.InspectLoader.source_to_code` that accepts source
data and a path and returns a code object. The default implementation
is equivalent to ``compile(data, path, 'exec', dont_inherit=True)``.
(Contributed by Eric Snow and Brett Cannon in :issue:`15627`.)
:class:`~importlib.abc.InspectLoader` also now has a default implementation
for the :meth:`~importlib.abc.InspectLoader.get_code` method. However,
it will normally be desirable to override the default implementation
for performance reasons. (Contributed by Brett Cannon in :issue:`18072`.)
The :func:`~importlib.reload` function has been moved from :mod:`imp` to
:mod:`importlib` as part of the :mod:`imp` module deprecation. (Contributed by
Berker Peksag in :issue:`18193`.)
:mod:`importlib.util` now has a :data:`~importlib.util.MAGIC_NUMBER` attribute
providing access to the bytecode version number. This replaces the
:func:`~imp.get_magic` function in the deprecated :mod:`imp` module.
(Contributed by Brett Cannon in :issue:`18192`.)
New :mod:`importlib.util` functions :func:`~importlib.util.cache_from_source`
and :func:`~importlib.util.source_from_cache` replace the same-named functions
in the deprecated :mod:`imp` module. (Contributed by Brett Cannon in
:issue:`18194`.)
The :mod:`importlib` bootstrap :class:`.NamespaceLoader` now conforms to
the :class:`.InspectLoader` ABC, which means that ``runpy`` and
``python -m`` can now be used with namespace packages. (Contributed
by Brett Cannon in :issue:`18058`.)
:mod:`importlib.util` has a new function :func:`~importlib.util.decode_source`
that decodes source from bytes using universal newline processing. This is
useful for implementing :meth:`.InspectLoader.get_source` methods.
:class:`importlib.machinery.ExtensionFileLoader` now has a
:meth:`~importlib.machinery.ExtensionFileLoader.get_filename` method. This was
inadvertently omitted in the original implementation. (Contributed by Eric
Snow in :issue:`19152`.)
2013-08-12 15:48:15 -03:00
inspect
-------
The :mod:`inspect` module now offers a basic :ref:`command line interface
<inspect-module-cli>` to quickly display source code and other
information for modules, classes and functions. (Contributed by Claudiu Popa
and Nick Coghlan in :issue:`18626`.)
2013-08-12 15:48:15 -03:00
:func:`~inspect.unwrap` makes it easy to unravel wrapper function chains
created by :func:`functools.wraps` (and any other API that sets the
``__wrapped__`` attribute on a wrapper function). (Contributed by
Daniel Urban, Aaron Iles and Nick Coghlan in :issue:`13266`.)
As part of the implementation of the new :mod:`enum` module, the
:mod:`inspect` module now has substantially better support for custom
``__dir__`` methods and dynamic class attributes provided through
metaclasses. (Contributed by Ethan Furman in :issue:`18929` and
:issue:`19030`.)
:func:`~inspect.getfullargspec` and :func:`~inspect.getargspec`
now use the :func:`~inspect.signature` API. This allows them to
support a much broader range of callables, including those with
``__signature__`` attributes, those with metadata provided by argument
clinic, :func:`functools.partial` objects and more. Note that, unlike
:func:`~inspect.signature`, these functions still ignore ``__wrapped__``
attributes, and report the already bound first argument for bound methods,
so it is still necessary to update your code to use
:func:`~inspect.signature` directly if those features are desired.
(Contributed by Yury Selivanov in :issue:`17481`.)
:func:`~inspect.signature` now supports duck types of CPython functions,
which adds support for functions compiled with Cython. (Contributed
by Stefan Behnel and Yury Selivanov in :issue:`17159`.)
2013-08-12 15:48:15 -03:00
ipaddress
---------
:mod:`ipaddress` was added to the standard library in Python 3.3 as a
:term:`provisional API`. With the release of Python 3.4, this qualification
has been removed: :mod:`ipaddress` is now considered a stable API, covered
by the normal standard library requirements to maintain backwards
compatibility.
A new :attr:`~ipaddress.IPv4Address.is_global` property is ``True`` if
an address is globally routeable. (Contributed by Peter Moody in
:issue:`17400`.)
logging
-------
The :class:`~logging.handlers.TimedRotatingFileHandler` has a new *atTime*
parameter that can be used to specify the time of day when rollover should
happen. (Contributed by Ronald Oussoren in :issue:`9556`.)
:class:`~logging.handlers.SocketHandler` and
:class:`~logging.handlers.DatagramHandler` now support Unix domain sockets (by
setting *port* to ``None``). (Contributed by Vinay Sajip in commit
ce46195b56a9.)
:func:`~logging.config.fileConfig` now accepts a
:class:`configparser.RawConfigParser` subclass instance for the *fname*
parameter. This facilitates using a configuration file when logging
configuration is just a part of the overall application configuration, or where
the application modifies the configuration before passing it to
:func:`~logging.config.fileConfig`. (Contributed by Vinay Sajip in
:issue:`16110`.)
Logging configuration data received from a socket via the
:func:`logging.config.listen` function can now be validated before being
processed by supplying a verification function as the argument to the new
*verify* keyword argument. (Contributed by Vinay Sajip in :issue:`15452`.)
2013-12-22 21:40:11 -04:00
.. _whatsnew-marshal-3:
marshal
-------
The default :mod:`marshal` version has been bumped to 3. The code implementing
the new version restores the Python2 behavior of recording only one copy of
interned strings and preserving the interning on deserialization, and extends
this "one copy" ability to any object type (including handling recursive
references). This reduces both the size of ``.pyc`` files and the amount of
memory a module occupies in memory when it is loaded from a ``.pyc`` (or
``.pyo``) file. (Contributed by Kristján Valur Jónsson in :issue:`16475`,
with additional speedups by Antoine Pitrou in :issue:`19219`.)
2013-12-22 21:40:11 -04:00
2013-08-12 15:46:47 -03:00
mmap
----
mmap objects can now be :mod:`weakref`\ ed. (Contributed by Valerie Lambert in
:issue:`4885`.)
multiprocessing
---------------
.. _whatsnew-multiprocessing-no-fork:
On Unix two new :ref:`start methods <multiprocessing-start-methods>`,
2015-07-02 00:36:21 -03:00
``spawn`` and ``forkserver``, have been added for starting processes using
:mod:`multiprocessing`. These make the mixing of processes with threads more
robust, and the ``spawn`` method matches the semantics that multiprocessing has
always used on Windows. New function
:func:`~multiprocessing.get_all_start_methods` reports all start methods
available on the platform, :func:`~multiprocessing.get_start_method` reports
the current start method, and :func:`~multiprocessing.set_start_method` sets
the start method. (Contributed by Richard Oudkerk in :issue:`8713`.)
:mod:`multiprocessing` also now has the concept of a ``context``, which
determines how child processes are created. New function
:func:`~multiprocessing.get_context` returns a context that uses a specified
start method. It has the same API as the :mod:`multiprocessing` module itself,
so you can use it to create :class:`~multiprocessing.pool.Pool`\ s and other
objects that will operate within that context. This allows a framework and an
application or different parts of the same application to use multiprocessing
without interfering with each other. (Contributed by Richard Oudkerk in
:issue:`18999`.)
Except when using the old *fork* start method, child processes no longer
inherit unneeded handles/file descriptors from their parents (part of
:issue:`8713`).
:mod:`multiprocessing` now relies on :mod:`runpy` (which implements the
``-m`` switch) to initialise ``__main__`` appropriately in child processes
when using the ``spawn`` or ``forkserver`` start methods. This resolves some
edge cases where combining multiprocessing, the ``-m`` command line switch,
and explicit relative imports could cause obscure failures in child
processes. (Contributed by Nick Coghlan in :issue:`19946`.)
operator
--------
New function :func:`~operator.length_hint` provides an implementation of the
specification for how the :meth:`~object.__length_hint__` special method should
be used, as part of the :pep:`424` formal specification of this language
feature. (Contributed by Armin Ronacher in :issue:`16148`.)
There is now a pure-python version of the :mod:`operator` module available for
reference and for use by alternate implementations of Python. (Contributed by
Zachary Ware in :issue:`16694`.)
os
--
There are new functions to get and set the :ref:`inheritable flag
<fd_inheritance>` of a file descriptor (:func:`os.get_inheritable`,
:func:`os.set_inheritable`) or a Windows handle
(:func:`os.get_handle_inheritable`, :func:`os.set_handle_inheritable`).
New function :func:`~os.cpu_count` reports the number of CPUs available on the
platform on which Python is running (or ``None`` if the count can't be
determined). The :func:`multiprocessing.cpu_count` function is now implemented
in terms of this function). (Contributed by Trent Nelson, Yogesh Chaudhari,
Victor Stinner, and Charles-François Natali in :issue:`17914`.)
:func:`os.path.samestat` is now available on the Windows platform (and the
:func:`os.path.samefile` implementation is now shared between Unix and
Windows). (Contributed by Brian Curtin in :issue:`11939`.)
:func:`os.path.ismount` now recognizes volumes mounted below a drive
root on Windows. (Contributed by Tim Golden in :issue:`9035`.)
:func:`os.open` supports two new flags on platforms that provide them,
:data:`~os.O_PATH` (un-opened file descriptor), and :data:`~os.O_TMPFILE`
(unnamed temporary file; as of 3.4.0 release available only on Linux systems
with a kernel version of 3.11 or newer that have uapi headers). (Contributed
by Christian Heimes in :issue:`18673` and Benjamin Peterson, respectively.)
pdb
---
:mod:`pdb` has been enhanced to handle generators, :keyword:`yield`, and
``yield from`` in a more useful fashion. This is especially helpful when
debugging :mod:`asyncio` based programs. (Contributed by Andrew Svetlov and
Xavier de Gaye in :issue:`16596`.)
The ``print`` command has been removed from :mod:`pdb`, restoring access to the
Python :func:`print` function from the pdb command line. Python2's ``pdb`` did
not have a ``print`` command; instead, entering ``print`` executed the
``print`` statement. In Python3 ``print`` was mistakenly made an alias for the
pdb :pdbcmd:`p` command. ``p``, however, prints the ``repr`` of its argument,
not the ``str`` like the Python2 ``print`` command did. Worse, the Python3
``pdb print`` command shadowed the Python3 ``print`` function, making it
inaccessible at the ``pdb`` prompt. (Contributed by Connor Osborn in
:issue:`18764`.)
.. _whatsnew-protocol-4:
pickle
------
:mod:`pickle` now supports (but does not use by default) a new pickle protocol,
protocol 4. This new protocol addresses a number of issues that were present
in previous protocols, such as the serialization of nested classes, very large
strings and containers, and classes whose :meth:`__new__` method takes
keyword-only arguments. It also provides some efficiency improvements.
.. seealso::
:pep:`3154` -- Pickle protocol 4
PEP written by Antoine Pitrou and implemented by Alexandre Vassalotti.
plistlib
--------
:mod:`plistlib` now has an API that is similar to the standard pattern for
stdlib serialization protocols, with new :func:`~plistlib.load`,
:func:`~plistlib.dump`, :func:`~plistlib.loads`, and :func:`~plistlib.dumps`
functions. (The older API is now deprecated.) In addition to the already
supported XML plist format (:data:`~plistlib.FMT_XML`), it also now supports
the binary plist format (:data:`~plistlib.FMT_BINARY`). (Contributed by Ronald
Oussoren and others in :issue:`14455`.)
2013-08-12 15:46:47 -03:00
poplib
------
Two new methods have been added to :mod:`poplib`: :meth:`~poplib.POP3.capa`,
which returns the list of capabilities advertised by the POP server, and
:meth:`~poplib.POP3.stls`, which switches a clear-text POP3 session into an
encrypted POP3 session if the POP server supports it. (Contributed by Lorenzo
Catucci in :issue:`4473`.)
2013-08-12 15:46:47 -03:00
pprint
------
The :mod:`pprint` module's :class:`~pprint.PrettyPrinter` class and its
:func:`~pprint.pformat`, and :func:`~pprint.pprint` functions have a new
option, *compact*, that controls how the output is formatted. Currently
setting *compact* to ``True`` means that sequences will be printed with as many
sequence elements as will fit within *width* on each (indented) line.
(Contributed by Serhiy Storchaka in :issue:`19132`.)
Long strings are now wrapped using Python's normal line continuation
syntax. (Contributed by Antoine Pitrou in :issue:`17150`.)
pty
---
:func:`pty.spawn` now returns the status value from :func:`os.waitpid` on
the child process, instead of ``None``. (Contributed by Gregory P. Smith.)
pydoc
-----
The :mod:`pydoc` module is now based directly on the :func:`inspect.signature`
introspection API, allowing it to provide signature information for a wider
variety of callable objects. This change also means that ``__wrapped__``
attributes are now taken into account when displaying help information.
(Contributed by Larry Hastings in :issue:`19674`.)
The :mod:`pydoc` module no longer displays the ``self`` parameter for
already bound methods. Instead, it aims to always display the exact current
signature of the supplied callable. (Contributed by Larry Hastings in
:issue:`20710`.)
In addition to the changes that have been made to :mod:`pydoc` directly,
its handling of custom ``__dir__`` methods and various descriptor
behaviours has also been improved substantially by the underlying changes in
the :mod:`inspect` module.
As the :func:`help` builtin is based on :mod:`pydoc`, the above changes also
affect the behaviour of :func:`help`.
re
--
New :func:`~re.fullmatch` function and :meth:`.regex.fullmatch` method anchor
the pattern at both ends of the string to match. This provides a way to be
explicit about the goal of the match, which avoids a class of subtle bugs where
``$`` characters get lost during code changes or the addition of alternatives
to an existing regular expression. (Contributed by Matthew Barnett in
:issue:`16203`.)
The repr of :ref:`regex objects <re-objects>` now includes the pattern
and the flags; the repr of :ref:`match objects <match-objects>` now
includes the start, end, and the part of the string that matched. (Contributed
by Hugo Lopes Tavares and Serhiy Storchaka in :issue:`13592` and
:issue:`17087`.)
resource
--------
New :func:`~resource.prlimit` function, available on Linux platforms with a
kernel version of 2.6.36 or later and glibc of 2.13 or later, provides the
ability to query or set the resource limits for processes other than the one
making the call. (Contributed by Christian Heimes in :issue:`16595`.)
On Linux kernel version 2.6.36 or later, there are also some new
Linux specific constants: :attr:`~resource.RLIMIT_MSGQUEUE`,
:attr:`~resource.RLIMIT_NICE`, :attr:`~resource.RLIMIT_RTPRIO`,
:attr:`~resource.RLIMIT_RTTIME`, and :attr:`~resource.RLIMIT_SIGPENDING`.
(Contributed by Christian Heimes in :issue:`19324`.)
On FreeBSD version 9 and later, there some new FreeBSD specific constants:
:attr:`~resource.RLIMIT_SBSIZE`, :attr:`~resource.RLIMIT_SWAP`, and
:attr:`~resource.RLIMIT_NPTS`. (Contributed by Claudiu Popa in
:issue:`19343`.)
select
------
:class:`~select.epoll` objects now support the context management protocol.
When used in a :keyword:`with` statement, the :meth:`~select.epoll.close`
method will be called automatically at the end of the block. (Contributed
by Serhiy Storchaka in :issue:`16488`.)
:class:`~select.devpoll` objects now have :meth:`~select.devpoll.fileno` and
:meth:`~select.devpoll.close` methods, as well as a new attribute
:attr:`~select.devpoll.closed`. (Contributed by Victor Stinner in
:issue:`18794`.)
shelve
------
:class:`~shelve.Shelf` instances may now be used in :keyword:`with` statements,
and will be automatically closed at the end of the :keyword:`!with` block.
(Contributed by Filip Gruszczyński in :issue:`13896`.)
shutil
------
:func:`~shutil.copyfile` now raises a specific :exc:`~shutil.Error` subclass,
:exc:`~shutil.SameFileError`, when the source and destination are the same
file, which allows an application to take appropriate action on this specific
error. (Contributed by Atsuo Ishimoto and Hynek Schlawack in
:issue:`1492704`.)
smtpd
-----
The :class:`~smtpd.SMTPServer` and :class:`~smtpd.SMTPChannel` classes now
accept a *map* keyword argument which, if specified, is passed in to
:class:`asynchat.async_chat` as its *map* argument. This allows an application
to avoid affecting the global socket map. (Contributed by Vinay Sajip in
:issue:`11959`.)
smtplib
-------
:exc:`~smtplib.SMTPException` is now a subclass of :exc:`OSError`, which allows
both socket level errors and SMTP protocol level errors to be caught in one
try/except statement by code that only cares whether or not an error occurred.
(Contributed by Ned Jackson Lovely in :issue:`2118`.)
2013-08-12 15:48:15 -03:00
socket
------
The socket module now supports the :data:`~socket.CAN_BCM` protocol on
platforms that support it. (Contributed by Brian Thorne in :issue:`15359`.)
Socket objects have new methods to get or set their :ref:`inheritable flag
<fd_inheritance>`, :meth:`~socket.socket.get_inheritable` and
:meth:`~socket.socket.set_inheritable`.
The ``socket.AF_*`` and ``socket.SOCK_*`` constants are now enumeration values
using the new :mod:`enum` module. This allows meaningful names to be printed
during debugging, instead of integer "magic numbers".
The :data:`~socket.AF_LINK` constant is now available on BSD and OSX.
:func:`~socket.inet_pton` and :func:`~socket.inet_ntop` are now supported
on Windows. (Contributed by Atsuo Ishimoto in :issue:`7171`.)
sqlite3
-------
A new boolean parameter to the :func:`~sqlite3.connect` function, *uri*, can be
used to indicate that the *database* parameter is a ``uri`` (see the `SQLite
URI documentation <https://www.sqlite.org/uri.html>`_). (Contributed by poq in
:issue:`13773`.)
ssl
---
.. _whatsnew-tls-11-12:
2013-06-22 14:34:17 -03:00
:data:`~ssl.PROTOCOL_TLSv1_1` and :data:`~ssl.PROTOCOL_TLSv1_2` (TLSv1.1 and
TLSv1.2 support) have been added; support for these protocols is only available if
Python is linked with OpenSSL 1.0.1 or later. (Contributed by Michele Orrù and
Antoine Pitrou in :issue:`16692`.)
.. _whatsnew34-sslcontext:
New function :func:`~ssl.create_default_context` provides a standard way to
obtain an :class:`~ssl.SSLContext` whose settings are intended to be a
reasonable balance between compatibility and security. These settings are
more stringent than the defaults provided by the :class:`~ssl.SSLContext`
constructor, and may be adjusted in the future, without prior deprecation, if
best-practice security requirements change. The new recommended best
practice for using stdlib libraries that support SSL is to use
:func:`~ssl.create_default_context` to obtain an :class:`~ssl.SSLContext`
object, modify it if needed, and then pass it as the *context* argument
of the appropriate stdlib API. (Contributed by Christian Heimes
in :issue:`19689`.)
:class:`~ssl.SSLContext` method :meth:`~ssl.SSLContext.load_verify_locations`
accepts a new optional argument *cadata*, which can be used to provide PEM or
DER encoded certificates directly via strings or bytes, respectively.
(Contributed by Christian Heimes in :issue:`18138`.)
New function :func:`~ssl.get_default_verify_paths` returns
a named tuple of the paths and environment variables that the
:meth:`~ssl.SSLContext.set_default_verify_paths` method uses to set
OpenSSL's default ``cafile`` and ``capath``. This can be an aid in
debugging default verification issues. (Contributed by Christian Heimes
in :issue:`18143`.)
:class:`~ssl.SSLContext` has a new method,
:meth:`~ssl.SSLContext.cert_store_stats`, that reports the number of loaded
``X.509`` certs, ``X.509 CA`` certs, and certificate revocation lists
(``crl``\ s), as well as a :meth:`~ssl.SSLContext.get_ca_certs` method that
returns a list of the loaded ``CA`` certificates. (Contributed by Christian
Heimes in :issue:`18147`.)
If OpenSSL 0.9.8 or later is available, :class:`~ssl.SSLContext` has a new
attribute :attr:`~ssl.SSLContext.verify_flags` that can be used to control the
certificate verification process by setting it to some combination of the new
constants :data:`~ssl.VERIFY_DEFAULT`, :data:`~ssl.VERIFY_CRL_CHECK_LEAF`,
:data:`~ssl.VERIFY_CRL_CHECK_CHAIN`, or :data:`~ssl.VERIFY_X509_STRICT`.
OpenSSL does not do any CRL verification by default. (Contributed by
Christien Heimes in :issue:`8813`.)
New :class:`~ssl.SSLContext` method :meth:`~ssl.SSLContext.load_default_certs`
2014-03-17 15:00:48 -03:00
loads a set of default "certificate authority" (CA) certificates from default
locations, which vary according to the platform. It can be used to load both
TLS web server authentication certificates
(``purpose=``:data:`~ssl.Purpose.SERVER_AUTH`) for a client to use to verify a
server, and certificates for a server to use in verifying client certificates
(``purpose=``:data:`~ssl.Purpose.CLIENT_AUTH`). (Contributed by Christian
Heimes in :issue:`19292`.)
.. _whatsnew34-win-cert-store:
Two new windows-only functions, :func:`~ssl.enum_certificates` and
:func:`~ssl.enum_crls` provide the ability to retrieve certificates,
certificate information, and CRLs from the Windows cert store. (Contributed
by Christian Heimes in :issue:`17134`.)
2013-08-12 15:46:47 -03:00
.. _whatsnew34-sni:
Support for server-side SNI (Server Name Indication) using the new
2013-08-12 15:46:47 -03:00
:meth:`ssl.SSLContext.set_servername_callback` method.
(Contributed by Daniel Black in :issue:`8109`.)
The dictionary returned by :meth:`.SSLSocket.getpeercert` contains additional
``X509v3`` extension items: ``crlDistributionPoints``, ``calIssuers``, and
``OCSP`` URIs. (Contributed by Christian Heimes in :issue:`18379`.)
2013-08-12 15:46:47 -03:00
2013-08-12 15:48:15 -03:00
stat
----
The :mod:`stat` module is now backed by a C implementation in :mod:`_stat`. A C
implementation is required as most of the values aren't standardized and
are platform-dependent. (Contributed by Christian Heimes in :issue:`11016`.)
2013-08-12 15:48:15 -03:00
The module supports new :mod:`~stat.ST_MODE` flags, :mod:`~stat.S_IFDOOR`,
:attr:`~stat.S_IFPORT`, and :attr:`~stat.S_IFWHT`. (Contributed by
Christian Hiemes in :issue:`11016`.)
2013-08-12 15:48:15 -03:00
2013-08-12 15:46:47 -03:00
struct
------
New function :mod:`~struct.iter_unpack` and a new
:meth:`struct.Struct.iter_unpack` method on compiled formats provide streamed
unpacking of a buffer containing repeated instances of a given format of data.
(Contributed by Antoine Pitrou in :issue:`17804`.)
subprocess
----------
:func:`~subprocess.check_output` now accepts an *input* argument that can
be used to provide the contents of ``stdin`` for the command that is run.
(Contributed by Zack Weinberg in :issue:`16624`.)
2013-08-12 15:46:47 -03:00
:func:`~subprocess.getstatus` and :func:`~subprocess.getstatusoutput` now
work on Windows. This change was actually inadvertently made in 3.3.4.
(Contributed by Tim Golden in :issue:`10197`.)
2013-08-12 15:46:47 -03:00
sunau
-----
The :meth:`~sunau.getparams` method now returns a namedtuple rather than a
plain tuple. (Contributed by Claudiu Popa in :issue:`18901`.)
:meth:`sunau.open` now supports the context management protocol: when used in a
:keyword:`with` block, the ``close`` method of the returned object will be
called automatically at the end of the block. (Contributed by Serhiy Storchaka
in :issue:`18878`.)
:meth:`.AU_write.setsampwidth` now supports 24 bit samples, thus adding
support for writing 24 sample using the module. (Contributed by
Serhiy Storchaka in :issue:`19261`.)
The :meth:`~sunau.AU_write.writeframesraw` and
:meth:`~sunau.AU_write.writeframes` methods now accept any :term:`bytes-like
object`. (Contributed by Serhiy Storchaka in :issue:`8311`.)
sys
---
New function :func:`sys.getallocatedblocks` returns the current number of
blocks allocated by the interpreter. (In CPython with the default
``--with-pymalloc`` setting, this is allocations made through the
:c:func:`PyObject_Malloc` API.) This can be useful for tracking memory leaks,
especially if automated via a test suite. (Contributed by Antoine Pitrou
in :issue:`13390`.)
When the Python interpreter starts in :ref:`interactive mode
<tut-interactive>`, it checks for an :data:`~sys.__interactivehook__` attribute
on the :mod:`sys` module. If the attribute exists, its value is called with no
arguments just before interactive mode is started. The check is made after the
:envvar:`PYTHONSTARTUP` file is read, so it can be set there. The :mod:`site`
module :ref:`sets it <rlcompleter-config>` to a function that enables tab
completion and history saving (in :file:`~/.python-history`) if the platform
supports :mod:`readline`. If you do not want this (new) behavior, you can
override it in :envvar:`PYTHONSTARTUP`, :mod:`sitecustomize`, or
:mod:`usercustomize` by deleting this attribute from :mod:`sys` (or setting it
to some other callable). (Contributed by Éric Araujo and Antoine Pitrou in
:issue:`5845`.)
tarfile
-------
The :mod:`tarfile` module now supports a simple :ref:`tarfile-commandline` when
called as a script directly or via ``-m``. This can be used to create and
extract tarfile archives. (Contributed by Berker Peksag in :issue:`13477`.)
textwrap
--------
The :class:`~textwrap.TextWrapper` class has two new attributes/constructor
arguments: :attr:`~textwrap.TextWrapper.max_lines`, which limits the number of
lines in the output, and :attr:`~textwrap.TextWrapper.placeholder`, which is a
string that will appear at the end of the output if it has been truncated
because of *max_lines*. Building on these capabilities, a new convenience
function :func:`~textwrap.shorten` collapses all of the whitespace in the input
to single spaces and produces a single line of a given *width* that ends with
the *placeholder* (by default, ``[...]``). (Contributed by Antoine Pitrou and
Serhiy Storchaka in :issue:`18585` and :issue:`18725`.)
threading
---------
The :class:`~threading.Thread` object representing the main thread can be
obtained from the new :func:`~threading.main_thread` function. In normal
conditions this will be the thread from which the Python interpreter was
started. (Contributed by Andrew Svetlov in :issue:`18882`.)
traceback
---------
A new :func:`traceback.clear_frames` function takes a traceback object
and clears the local variables in all of the frames it references,
reducing the amount of memory consumed. (Contributed by Andrew Kuchling in
:issue:`1565525`.)
types
-----
A new :func:`~types.DynamicClassAttribute` descriptor provides a way to define
an attribute that acts normally when looked up through an instance object, but
which is routed to the *class* ``__getattr__`` when looked up through the
class. This allows one to have properties active on a class, and have virtual
attributes on the class with the same name (see :mod:`Enum` for an example).
(Contributed by Ethan Furman in :issue:`19030`.)
2013-08-12 15:46:47 -03:00
urllib
------
:mod:`urllib.request` now supports ``data:`` URLs via the
:class:`~urllib.request.DataHandler` class. (Contributed by Mathias Panzenböck
in :issue:`16423`.)
2013-08-12 15:46:47 -03:00
The http method that will be used by a :class:`~urllib.request.Request` class
can now be specified by setting a :class:`~urllib.request.Request.method`
class attribute on the subclass. (Contributed by Jason R Coombs in
:issue:`18978`.)
:class:`~urllib.request.Request` objects are now reusable: if the
:attr:`~urllib.request.Request.full_url` or :attr:`~urllib.request.Request.data`
attributes are modified, all relevant internal properties are updated. This
means, for example, that it is now possible to use the same
:class:`~urllib.request.Request` object in more than one
:meth:`.OpenerDirector.open` call with different *data* arguments, or to
modify a :class:`~urllib.request.Request`\ 's ``url`` rather than recomputing it
from scratch. There is also a new
:meth:`~urllib.request.Request.remove_header` method that can be used to remove
headers from a :class:`~urllib.request.Request`. (Contributed by Alexey
Kachayev in :issue:`16464`, Daniel Wozniak in :issue:`17485`, and Damien Brecht
and Senthil Kumaran in :issue:`17272`.)
:class:`~urllib.error.HTTPError` objects now have a
:attr:`~urllib.error.HTTPError.headers` attribute that provides access to the
HTTP response headers associated with the error. (Contributed by
Berker Peksag in :issue:`15701`.)
2013-08-12 15:46:47 -03:00
unittest
--------
The :class:`~unittest.TestCase` class has a new method,
:meth:`~unittest.TestCase.subTest`, that produces a context manager whose
:keyword:`with` block becomes a "sub-test". This context manager allows a test
method to dynamically generate subtests by, say, calling the ``subTest``
context manager inside a loop. A single test method can thereby produce an
indefinite number of separately-identified and separately-counted tests, all of
which will run even if one or more of them fail. For example::
class NumbersTest(unittest.TestCase):
def test_even(self):
for i in range(6):
with self.subTest(i=i):
self.assertEqual(i % 2, 0)
will result in six subtests, each identified in the unittest verbose output
with a label consisting of the variable name ``i`` and a particular value for
that variable (``i=0``, ``i=1``, etc). See :ref:`subtests` for the full
version of this example. (Contributed by Antoine Pitrou in :issue:`16997`.)
:func:`unittest.main` now accepts an iterable of test names for
*defaultTest*, where previously it only accepted a single test name as a
string. (Contributed by Jyrki Pulliainen in :issue:`15132`.)
If :class:`~unittest.SkipTest` is raised during test discovery (that is, at the
module level in the test file), it is now reported as a skip instead of an
error. (Contributed by Zach Ware in :issue:`16935`.)
:meth:`~unittest.TestLoader.discover` now sorts the discovered files to provide
consistent test ordering. (Contributed by Martin Melin and Jeff Ramnani in
:issue:`16709`.)
:class:`~unittest.TestSuite` now drops references to tests as soon as the test
has been run, if the test is successful. On Python interpreters that do
garbage collection, this allows the tests to be garbage collected if nothing
else is holding a reference to the test. It is possible to override this
behavior by creating a :class:`~unittest.TestSuite` subclass that defines a
custom ``_removeTestAtIndex`` method. (Contributed by Tom Wardill, Matt
McClure, and Andrew Svetlov in :issue:`11798`.)
A new test assertion context-manager, :meth:`~unittest.TestCase.assertLogs`,
will ensure that a given block of code emits a log message using the
:mod:`logging` module. By default the message can come from any logger and
have a priority of ``INFO`` or higher, but both the logger name and an
alternative minimum logging level may be specified. The object returned by the
context manager can be queried for the :class:`~logging.LogRecord`\ s and/or
formatted messages that were logged. (Contributed by Antoine Pitrou in
:issue:`18937`.)
Test discovery now works with namespace packages (Contributed by Claudiu Popa
in :issue:`17457`.)
:mod:`unittest.mock` objects now inspect their specification signatures when
matching calls, which means an argument can now be matched by either position
or name, instead of only by position. (Contributed by Antoine Pitrou in
:issue:`17015`.)
:func:`~mock.mock_open` objects now have ``readline`` and ``readlines``
methods. (Contributed by Toshio Kuratomi in :issue:`17467`.)
venv
----
:mod:`venv` now includes activation scripts for the ``csh`` and ``fish``
shells. (Contributed by Andrew Svetlov in :issue:`15417`.)
:class:`~venv.EnvBuilder` and the :func:`~venv.create` convenience function
take a new keyword argument *with_pip*, which defaults to ``False``, that
controls whether or not :class:`~venv.EnvBuilder` ensures that ``pip`` is
installed in the virtual environment. (Contributed by Nick Coghlan in
:issue:`19552` as part of the :pep:`453` implementation.)
wave
----
The :meth:`~wave.getparams` method now returns a namedtuple rather than a
plain tuple. (Contributed by Claudiu Popa in :issue:`17487`.)
:meth:`wave.open` now supports the context management protocol. (Contributed
by Claudiu Popa in :issue:`17616`.)
:mod:`wave` can now :ref:`write output to unseekable files
<wave-write-objects>`. (Contributed by David Jones, Guilherme Polo, and Serhiy
Storchaka in :issue:`5202`.)
The :meth:`~wave.Wave_write.writeframesraw` and
:meth:`~wave.Wave_write.writeframes` methods now accept any :term:`bytes-like
object`. (Contributed by Serhiy Storchaka in :issue:`8311`.)
2013-08-12 15:46:47 -03:00
weakref
-------
New :class:`~weakref.WeakMethod` class simulates weak references to bound
methods. (Contributed by Antoine Pitrou in :issue:`14631`.)
2013-08-12 15:46:47 -03:00
New :class:`~weakref.finalize` class makes it possible to register a callback
to be invoked when an object is garbage collected, without needing to
carefully manage the lifecycle of the weak reference itself. (Contributed by
Richard Oudkerk in :issue:`15528`.)
2013-08-12 15:46:47 -03:00
The callback, if any, associated with a :class:`~weakref.ref` is now
exposed via the :attr:`~weakref.ref.__callback__` attribute. (Contributed
by Mark Dickinson in :issue:`17643`.)
2013-08-12 15:46:47 -03:00
xml.etree
---------
A new parser, :class:`~xml.etree.ElementTree.XMLPullParser`, allows a
non-blocking applications to parse XML documents. An example can be
seen at :ref:`elementtree-pull-parsing`. (Contributed by Antoine
Pitrou in :issue:`17741`.)
2013-08-12 15:46:47 -03:00
The :mod:`xml.etree.ElementTree` :func:`~xml.etree.ElementTree.tostring` and
:func:`~xml.etree.ElementTree.tostringlist` functions, and the
:class:`~xml.etree.ElementTree.ElementTree`
:meth:`~xml.etree.ElementTree.ElementTree.write` method, now have a
*short_empty_elements* :ref:`keyword-only parameter <keyword-only_parameter>`
providing control over whether elements with no content are written in
abbreviated (``<tag />``) or expanded (``<tag></tag>``) form. (Contributed by
Ariel Poliak and Serhiy Storchaka in :issue:`14377`.)
zipfile
-------
The :meth:`~zipfile.PyZipFile.writepy` method of the
:class:`~zipfile.PyZipFile` class has a new *filterfunc* option that can be
used to control which directories and files are added to the archive. For
example, this could be used to exclude test files from the archive.
(Contributed by Christian Tismer in :issue:`19274`.)
The *allowZip64* parameter to :class:`~zipfile.ZipFile` and
:class:`~zipfile.PyZipfile` is now ``True`` by default. (Contributed by
William Mallard in :issue:`17201`.)
CPython Implementation Changes
==============================
.. _whatsnew-pep-445:
PEP 445: Customization of CPython Memory Allocators
---------------------------------------------------
:pep:`445` adds new C level interfaces to customize memory allocation in
the CPython interpreter.
.. seealso::
:pep:`445` -- Add new APIs to customize Python memory allocators
PEP written and implemented by Victor Stinner.
.. _whatsnew-pep-442:
PEP 442: Safe Object Finalization
---------------------------------
:pep:`442` removes the current limitations and quirks of object finalization
in CPython. With it, objects with :meth:`__del__` methods, as well as
generators with :keyword:`finally` clauses, can be finalized when they are
part of a reference cycle.
As part of this change, module globals are no longer forcibly set to
:const:`None` during interpreter shutdown in most cases, instead relying
on the normal operation of the cyclic garbage collector. This avoids a
whole class of interpreter-shutdown-time errors, usually involving
``__del__`` methods, that have plagued Python since the cyclic GC
was first introduced.
.. seealso::
:pep:`442` -- Safe object finalization
PEP written and implemented by Antoine Pitrou.
.. _whatsnew-pep-456:
PEP 456: Secure and Interchangeable Hash Algorithm
--------------------------------------------------
:pep:`456` follows up on earlier security fix work done on Python's hash
algorithm to address certain DOS attacks to which public facing APIs backed by
dictionary lookups may be subject. (See :issue:`14621` for the start of the
current round of improvements.) The PEP unifies CPython's hash code to make it
easier for a packager to substitute a different hash algorithm, and switches
Python's default implementation to a SipHash implementation on platforms that
have a 64 bit data type. Any performance differences in comparison with the
older FNV algorithm are trivial.
The PEP adds additional fields to the :attr:`sys.hash_info` named tuple to
describe the hash algorithm in use by the currently executing binary. Otherwise,
the PEP does not alter any existing CPython APIs.
.. _whatsnew-pep-436:
PEP 436: Argument Clinic
------------------------
"Argument Clinic" (:pep:`436`) is now part of the CPython build process
and can be used to simplify the process of defining and maintaining
accurate signatures for builtins and standard library extension modules
implemented in C.
Some standard library extension modules have been converted to use Argument
Clinic in Python 3.4, and :mod:`pydoc` and :mod:`inspect` have been updated
accordingly.
It is expected that signature metadata for programmatic introspection will
be added to additional callables implemented in C as part of Python 3.4
maintenance releases.
.. note::
The Argument Clinic PEP is not fully up to date with the state of the
implementation. This has been deemed acceptable by the release manager
and core development team in this case, as Argument Clinic will not
be made available as a public API for third party use in Python 3.4.
.. seealso::
:pep:`436` -- The Argument Clinic DSL
PEP written and implemented by Larry Hastings.
Other Build and C API Changes
-----------------------------
2012-09-30 04:11:58 -03:00
* The new :c:func:`PyType_GetSlot` function has been added to the stable ABI,
allowing retrieval of function pointers from named type slots when using
the limited API. (Contributed by Martin von Löwis in :issue:`17162`.)
* The new :c:func:`Py_SetStandardStreamEncoding` pre-initialization API
allows applications embedding the CPython interpreter to reliably force
a particular encoding and error handler for the standard streams.
(Contributed by Bastien Montagne and Nick Coghlan in :issue:`16129`.)
2012-09-30 04:11:58 -03:00
2013-10-20 00:22:21 -03:00
* Most Python C APIs that don't mutate string arguments are now correctly
marked as accepting ``const char *`` rather than ``char *``. (Contributed
by Serhiy Storchaka in :issue:`1772673`.)
2013-10-20 00:22:21 -03:00
* A new shell version of ``python-config`` can be used even when a python
interpreter is not available (for example, in cross compilation scenarios).
* :c:func:`PyUnicode_FromFormat` now supports width and precision
specifications for ``%s``, ``%A``, ``%U``, ``%V``, ``%S``, and ``%R``.
(Contributed by Ysj Ray and Victor Stinner in :issue:`7330`.)
2012-09-30 04:11:58 -03:00
* New function :c:func:`PyStructSequence_InitType2` supplements the
existing :c:func:`PyStructSequence_InitType` function. The difference
is that it returns ``0`` on success and ``-1`` on failure.
* The CPython source can now be compiled using the address sanity checking
features of recent versions of GCC and clang: the false alarms in the small
object allocator have been silenced. (Contributed by Dhiru Kholia in
:issue:`18596`.)
* The Windows build now uses `Address Space Layout Randomization
<https://en.wikipedia.org/wiki/Address_space_layout_randomization>`_ and `Data Execution Prevention
<https://en.wikipedia.org/wiki/Data_Execution_Prevention>`_. (Contributed by
Christian Heimes in :issue:`16632`.)
* New function :c:func:`PyObject_LengthHint` is the C API equivalent
of :func:`operator.length_hint`. (Contributed by Armin Ronacher in
:issue:`16148`.)
.. _other-improvements-3.4:
Other Improvements
------------------
.. _whatsnew-isolated-mode:
* The :ref:`python <using-on-cmdline>` command has a new :ref:`option
<using-on-misc-options>`, ``-I``, which causes it to run in "isolated mode",
which means that :data:`sys.path` contains neither the script's directory nor
the user's ``site-packages`` directory, and all :envvar:`PYTHON*` environment
variables are ignored (it implies both ``-s`` and ``-E``). Other
restrictions may also be applied in the future, with the goal being to
isolate the execution of a script from the user's environment. This is
appropriate, for example, when Python is used to run a system script. On
most POSIX systems it can and should be used in the ``#!`` line of system
scripts. (Contributed by Christian Heimes in :issue:`16499`.)
* Tab-completion is now enabled by default in the interactive interpreter
on systems that support :mod:`readline`. History is also enabled by default,
and is written to (and read from) the file :file:`~/.python-history`.
(Contributed by Antoine Pitrou and Éric Araujo in :issue:`5845`.)
* Invoking the Python interpreter with ``--version`` now outputs the version to
standard output instead of standard error (:issue:`18338`). Similar changes
were made to :mod:`argparse` (:issue:`18920`) and other modules that have
script-like invocation capabilities (:issue:`18922`).
* The CPython Windows installer now adds ``.py`` to the :envvar:`PATHEXT`
variable when extensions are registered, allowing users to run a python
script at the windows command prompt by just typing its name without the
``.py`` extension. (Contributed by Paul Moore in :issue:`18569`.)
* A new ``make`` target `coverage-report
<https://devguide.python.org/coverage/#measuring-coverage-of-c-code-with-gcov-and-lcov>`_
will build python, run the test suite, and generate an HTML coverage report
for the C codebase using ``gcov`` and `lcov
<http://ltp.sourceforge.net/coverage/lcov.php>`_.
* The ``-R`` option to the :ref:`python regression test suite <regrtest>` now
also checks for memory allocation leaks, using
:func:`sys.getallocatedblocks()`. (Contributed by Antoine Pitrou in
:issue:`13390`.)
* ``python -m`` now works with namespace packages.
* The :mod:`stat` module is now implemented in C, which means it gets the
values for its constants from the C header files, instead of having the
values hard-coded in the python module as was previously the case.
* Loading multiple python modules from a single OS module (``.so``, ``.dll``)
now works correctly (previously it silently returned the first python
module in the file). (Contributed by Václav Šmilauer in :issue:`16421`.)
* A new opcode, :opcode:`LOAD_CLASSDEREF`, has been added to fix a bug in the
loading of free variables in class bodies that could be triggered by certain
uses of :ref:`__prepare__ <prepare>`. (Contributed by Benjamin Peterson in
:issue:`17853`.)
* A number of MemoryError-related crashes were identified and fixed by Victor
Stinner using his :pep:`445`-based ``pyfailmalloc`` tool (:issue:`18408`,
:issue:`18520`).
* The ``pyvenv`` command now accepts a ``--copies`` option
to use copies rather than symlinks even on systems where symlinks are the
default. (Contributed by Vinay Sajip in :issue:`18807`.)
* The ``pyvenv`` command also accepts a ``--without-pip``
option to suppress the otherwise-automatic bootstrapping of pip into
the virtual environment. (Contributed by Nick Coghlan in :issue:`19552`
as part of the :pep:`453` implementation.)
* The encoding name is now optional in the value set for the
:envvar:`PYTHONIOENCODING` environment variable. This makes it possible to
set just the error handler, without changing the default encoding.
(Contributed by Serhiy Storchaka in :issue:`18818`.)
* The :mod:`bz2`, :mod:`lzma`, and :mod:`gzip` module ``open`` functions now
support ``x`` (exclusive creation) mode. (Contributed by Tim Heaney and
Vajrasky Kok in :issue:`19201`, :issue:`19222`, and :issue:`19223`.)
Significant Optimizations
-------------------------
* The UTF-32 decoder is now 3x to 4x faster. (Contributed by Serhiy Storchaka
in :issue:`14625`.)
* The cost of hash collisions for sets is now reduced. Each hash table
probe now checks a series of consecutive, adjacent key/hash pairs before
continuing to make random probes through the hash table. This exploits
cache locality to make collision resolution less expensive.
The collision resolution scheme can be described as a hybrid of linear
probing and open addressing. The number of additional linear probes
defaults to nine. This can be changed at compile-time by defining
LINEAR_PROBES to be any value. Set LINEAR_PROBES=0 to turn-off
linear probing entirely. (Contributed by Raymond Hettinger in
:issue:`18771`.)
* The interpreter starts about 30% faster. A couple of measures lead to the
speedup. The interpreter loads fewer modules on startup, e.g. the :mod:`re`,
:mod:`collections` and :mod:`locale` modules and their dependencies are no
longer imported by default. The marshal module has been improved to load
compiled Python code faster. (Contributed by Antoine Pitrou, Christian
Heimes and Victor Stinner in :issue:`19219`, :issue:`19218`, :issue:`19209`,
:issue:`19205` and :issue:`9548`.)
* :class:`bz2.BZ2File` is now as fast or faster than the Python2 version for
most cases. :class:`lzma.LZMAFile` has also been optimized. (Contributed by
Serhiy Storchaka and Nadeem Vawda in :issue:`16034`.)
* :func:`random.getrandbits` is 20%-40% faster for small integers (the most
common use case). (Contributed by Serhiy Storchaka in :issue:`16674`.)
* By taking advantage of the new storage format for strings, pickling of
strings is now significantly faster. (Contributed by Victor Stinner and
Antoine Pitrou in :issue:`15596`.)
* A performance issue in :meth:`io.FileIO.readall` has been solved. This
particularly affects Windows, and significantly speeds up the case of piping
significant amounts of data through :mod:`subprocess`. (Contributed
by Richard Oudkerk in :issue:`15758`.)
* :func:`html.escape` is now 10x faster. (Contributed by Matt Bryant in
:issue:`18020`.)
* On Windows, the native ``VirtualAlloc`` is now used instead of the CRT
``malloc`` in ``obmalloc``. Artificial benchmarks show about a 3% memory
savings.
* :func:`os.urandom` now uses a lazily-opened persistent file descriptor
so as to avoid using many file descriptors when run in parallel from
multiple threads. (Contributed by Antoine Pitrou in :issue:`18756`.)
.. _deprecated-3.4:
2012-09-30 04:11:58 -03:00
Deprecated
==========
This section covers various APIs and other features that have been deprecated
in Python 3.4, and will be removed in Python 3.5 or later. In most (but not
all) cases, using the deprecated APIs will produce a :exc:`DeprecationWarning`
when the interpreter is run with deprecation warnings enabled (for example, by
using ``-Wd``).
2012-09-30 04:11:58 -03:00
Deprecations in the Python API
------------------------------
2012-09-30 04:11:58 -03:00
* As mentioned in :ref:`whatsnew-pep-451`, a number of :mod:`importlib`
methods and functions are deprecated: :meth:`importlib.find_loader` is
replaced by :func:`importlib.util.find_spec`;
:meth:`importlib.machinery.PathFinder.find_module` is replaced by
:meth:`importlib.machinery.PathFinder.find_spec`;
:meth:`importlib.abc.MetaPathFinder.find_module` is replaced by
:meth:`importlib.abc.MetaPathFinder.find_spec`;
:meth:`importlib.abc.PathEntryFinder.find_loader` and
:meth:`~importlib.abc.PathEntryFinder.find_module` are replaced by
:meth:`importlib.abc.PathEntryFinder.find_spec`; all of the ``xxxLoader`` ABC
``load_module`` methods (:meth:`importlib.abc.Loader.load_module`,
:meth:`importlib.abc.InspectLoader.load_module`,
:meth:`importlib.abc.FileLoader.load_module`,
:meth:`importlib.abc.SourceLoader.load_module`) should no longer be
implemented, instead loaders should implement an
``exec_module`` method
(:meth:`importlib.abc.Loader.exec_module`,
:meth:`importlib.abc.InspectLoader.exec_module`
:meth:`importlib.abc.SourceLoader.exec_module`) and let the import system
take care of the rest; and
:meth:`importlib.abc.Loader.module_repr`,
:meth:`importlib.util.module_for_loader`, :meth:`importlib.util.set_loader`,
and :meth:`importlib.util.set_package` are no longer needed because their
functions are now handled automatically by the import system.
* The :mod:`imp` module is pending deprecation. To keep compatibility with
Python 2/3 code bases, the module's removal is currently not scheduled.
* The :mod:`formatter` module is pending deprecation and is slated for removal
in Python 3.6.
* ``MD5`` as the default *digestmod* for the :func:`hmac.new` function is
deprecated. Python 3.6 will require an explicit digest name or constructor as
*digestmod* argument.
* The internal ``Netrc`` class in the :mod:`ftplib` module has been documented
as deprecated in its docstring for quite some time. It now emits a
:exc:`DeprecationWarning` and will be removed completely in Python 3.5.
* The undocumented *endtime* argument to :meth:`subprocess.Popen.wait` should
not have been exposed and is hopefully not in use; it is deprecated and
will mostly likely be removed in Python 3.5.
* The *strict* argument of :class:`~html.parser.HTMLParser` is deprecated.
* The :mod:`plistlib` :func:`~plistlib.readPlist`,
:func:`~plistlib.writePlist`, :func:`~plistlib.readPlistFromBytes`, and
:func:`~plistlib.writePlistToBytes` functions are deprecated in favor of the
corresponding new functions :func:`~plistlib.load`, :func:`~plistlib.dump`,
:func:`~plistlib.loads`, and :func:`~plistlib.dumps`. :func:`~plistlib.Data`
is deprecated in favor of just using the :class:`bytes` constructor.
* The :mod:`sysconfig` key ``SO`` is deprecated, it has been replaced by
``EXT_SUFFIX``.
2012-09-30 04:11:58 -03:00
* The ``U`` mode accepted by various ``open`` functions is deprecated.
In Python3 it does not do anything useful, and should be replaced by
appropriate uses of :class:`io.TextIOWrapper` (if needed) and its *newline*
argument.
2012-09-30 04:11:58 -03:00
* The *parser* argument of :func:`xml.etree.ElementTree.iterparse` has
been deprecated, as has the *html* argument of
:func:`~xml.etree.ElementTree.XMLParser`. To prepare for the removal of the
latter, all arguments to ``XMLParser`` should be passed by keyword.
2012-09-30 04:11:58 -03:00
Deprecated Features
2012-09-30 04:11:58 -03:00
-------------------
* Running :ref:`idle` with the ``-n`` flag (no subprocess) is deprecated.
However, the feature will not be removed until :issue:`18823` is resolved.
* The site module adding a "site-python" directory to sys.path, if it
exists, is deprecated (:issue:`19375`).
2012-09-30 04:11:58 -03:00
Removed
=======
Operating Systems No Longer Supported
-------------------------------------
Support for the following operating systems has been removed from the source
and build tools:
* OS/2 (:issue:`16135`).
* Windows 2000 (changeset e52df05b496a).
* Windows systems where ``COMSPEC`` points to ``command.com`` (:issue:`14470`).
* VMS (:issue:`16136`).
API and Feature Removals
------------------------
The following obsolete and previously deprecated APIs and features have been
removed:
* The unmaintained ``Misc/TextMate`` and ``Misc/vim`` directories have been
removed (see the `devguide <https://devguide.python.org>`_
for suggestions on what to use instead).
* The ``SO`` makefile macro is removed (it was replaced by the
``SHLIB_SUFFIX`` and ``EXT_SUFFIX`` macros) (:issue:`16754`).
* The ``PyThreadState.tick_counter`` field has been removed; its value has
been meaningless since Python 3.2, when the "new GIL" was introduced
(:issue:`19199`).
* ``PyLoader`` and ``PyPycLoader`` have been removed from :mod:`importlib`.
(Contributed by Taras Lyapun in :issue:`15641`.)
* The *strict* argument to :class:`~http.client.HTTPConnection` and
:class:`~http.client.HTTPSConnection` has been removed. HTTP 0.9-style
"Simple Responses" are no longer supported.
* The deprecated :mod:`urllib.request.Request` getter and setter methods
``add_data``, ``has_data``, ``get_data``, ``get_type``, ``get_host``,
``get_selector``, ``set_proxy``, ``get_origin_req_host``, and
``is_unverifiable`` have been removed (use direct attribute access instead).
* Support for loading the deprecated ``TYPE_INT64`` has been removed from
:mod:`marshal`. (Contributed by Dan Riti in :issue:`15480`.)
* :class:`inspect.Signature`: positional-only parameters are now required
to have a valid name.
* :meth:`object.__format__` no longer accepts non-empty format strings, it now
raises a :exc:`TypeError` instead. Using a non-empty string has been
deprecated since Python 3.2. This change has been made to prevent a
situation where previously working (but incorrect) code would start failing
if an object gained a __format__ method, which means that your code may now
raise a :exc:`TypeError` if you are using an ``'s'`` format code with objects
that do not have a __format__ method that handles it. See :issue:`7994` for
background.
* :meth:`difflib.SequenceMatcher.isbjunk` and
:meth:`difflib.SequenceMatcher.isbpopular` were deprecated in 3.2, and have
now been removed: use ``x in sm.bjunk`` and
``x in sm.bpopular``, where *sm* is a :class:`~difflib.SequenceMatcher` object
(:issue:`13248`).
Code Cleanups
-------------
* The unused and undocumented internal ``Scanner`` class has been removed from
the :mod:`pydoc` module.
* The private and effectively unused ``_gestalt`` module has been removed,
along with the private :mod:`platform` functions ``_mac_ver_lookup``,
``_mac_ver_gstalt``, and ``_bcd2str``, which would only have ever been called
on badly broken OSX systems (see :issue:`18393`).
* The hardcoded copies of certain :mod:`stat` constants that were included in
the :mod:`tarfile` module namespace have been removed.
2012-10-04 13:45:10 -03:00
Porting to Python 3.4
2012-09-30 04:11:58 -03:00
=====================
This section lists previously described changes and other bugfixes
that may require changes to your code.
Changes in 'python' Command Behavior
------------------------------------
* In a posix shell, setting the :envvar:`PATH` environment variable to
an empty value is equivalent to not setting it at all. However, setting
:envvar:`PYTHONPATH` to an empty value was *not* equivalent to not setting it
at all: setting :envvar:`PYTHONPATH` to an empty value was equivalent to
setting it to ``.``, which leads to confusion when reasoning by analogy to
how :envvar:`PATH` works. The behavior now conforms to the posix convention
for :envvar:`PATH`.
* The [X refs, Y blocks] output of a debug (``--with-pydebug``) build of the
CPython interpreter is now off by default. It can be re-enabled using the
``-X showrefcount`` option. (Contributed by Ezio Melotti in :issue:`17323`.)
* The python command and most stdlib scripts (as well as :mod:`argparse`) now
output ``--version`` information to ``stdout`` instead of ``stderr`` (for
issue list see :ref:`other-improvements-3.4` above).
Changes in the Python API
-------------------------
2013-04-09 18:03:10 -03:00
* The ABCs defined in :mod:`importlib.abc` now either raise the appropriate
exception or return a default value instead of raising
:exc:`NotImplementedError` blindly. This will only affect code calling
:func:`super` and falling through all the way to the ABCs. For compatibility,
catch both :exc:`NotImplementedError` or the appropriate exception as needed.
* The module type now initializes the :attr:`__package__` and :attr:`__loader__`
attributes to ``None`` by default. To determine if these attributes were set
in a backwards-compatible fashion, use e.g.
``getattr(module, '__loader__', None) is not None``. (:issue:`17115`.)
* :meth:`importlib.util.module_for_loader` now sets ``__loader__`` and
``__package__`` unconditionally to properly support reloading. If this is not
desired then you will need to set these attributes manually. You can use
:func:`importlib.util.module_to_load` for module management.
* Import now resets relevant attributes (e.g. ``__name__``, ``__loader__``,
``__package__``, ``__file__``, ``__cached__``) unconditionally when reloading.
Note that this restores a pre-3.3 behavior in that it means a module is
re-found when re-loaded (:issue:`19413`).
* Frozen packages no longer set ``__path__`` to a list containing the package
name, they now set it to an empty list. The previous behavior could cause
the import system to do the wrong thing on submodule imports if there was
also a directory with the same name as the frozen package. The correct way
to determine if a module is a package or not is to use ``hasattr(module,
'__path__')`` (:issue:`18065`).
* Frozen modules no longer define a ``__file__`` attribute. It's semantically
incorrect for frozen modules to set the attribute as they are not loaded from
any explicit location. If you must know that a module comes from frozen code
then you can see if the module's ``__spec__.location`` is set to ``'frozen'``,
check if the loader is a subclass of
:class:`importlib.machinery.FrozenImporter`,
or if Python 2 compatibility is necessary you can use :func:`imp.is_frozen`.
* :func:`py_compile.compile` now raises :exc:`FileExistsError` if the file path
it would write to is a symlink or a non-regular file. This is to act as a
warning that import will overwrite those files with a regular file regardless
of what type of file path they were originally.
* :meth:`importlib.abc.SourceLoader.get_source` no longer raises
:exc:`ImportError` when the source code being loaded triggers a
:exc:`SyntaxError` or :exc:`UnicodeDecodeError`. As :exc:`ImportError` is
meant to be raised only when source code cannot be found but it should, it was
felt to be over-reaching/overloading of that meaning when the source code is
found but improperly structured. If you were catching ImportError before and
wish to continue to ignore syntax or decoding issues, catch all three
exceptions now.
* :func:`functools.update_wrapper` and :func:`functools.wraps` now correctly
set the ``__wrapped__`` attribute to the function being wrapped, even if
that function also had its ``__wrapped__`` attribute set. This means
``__wrapped__`` attributes now correctly link a stack of decorated
functions rather than every ``__wrapped__`` attribute in the chain
referring to the innermost function. Introspection libraries that
assumed the previous behaviour was intentional can use
:func:`inspect.unwrap` to access the first function in the chain that has
no ``__wrapped__`` attribute.
* :func:`inspect.getfullargspec` has been reimplemented on top of
:func:`inspect.signature` and hence handles a much wider variety of callable
objects than it did in the past. It is expected that additional builtin and
extension module callables will gain signature metadata over the course of
the Python 3.4 series. Code that assumes that
:func:`inspect.getfullargspec` will fail on non-Python callables may need
to be adjusted accordingly.
2013-10-19 12:46:38 -03:00
* :class:`importlib.machinery.PathFinder` now passes on the current working
directory to objects in :data:`sys.path_hooks` for the empty string. This
results in :data:`sys.path_importer_cache` never containing ``''``, thus
iterating through :data:`sys.path_importer_cache` based on :data:`sys.path`
will not find all keys. A module's ``__file__`` when imported in the current
working directory will also now have an absolute path, including when using
``-m`` with the interpreter (except for ``__main__.__file__`` when a script
has been executed directly using a relative path) (Contributed by Brett
Cannon in :issue:`18416`). is specified on the command-line)
(:issue:`18416`).
* The removal of the *strict* argument to :class:`~http.client.HTTPConnection`
and :class:`~http.client.HTTPSConnection` changes the meaning of the
remaining arguments if you are specifying them positionally rather than by
keyword. If you've been paying attention to deprecation warnings your code
should already be specifying any additional arguments via keywords.
* Strings between ``from __future__ import ...`` statements now *always* raise
a :exc:`SyntaxError`. Previously if there was no leading docstring, an
interstitial string would sometimes be ignored. This brings CPython into
compliance with the language spec; Jython and PyPy already were.
(:issue:`17434`).
* :meth:`ssl.SSLSocket.getpeercert` and :meth:`ssl.SSLSocket.do_handshake`
now raise an :exc:`OSError` with ``ENOTCONN`` when the ``SSLSocket`` is not
connected, instead of the previous behavior of raising an
2014-03-17 15:22:59 -03:00
:exc:`AttributeError`. In addition, :meth:`~ssl.SSLSocket.getpeercert`
will raise a :exc:`ValueError` if the handshake has not yet been done.
* :func:`base64.b32decode` now raises a :exc:`binascii.Error` when the
input string contains non-b32-alphabet characters, instead of a
:exc:`TypeError`. This particular :exc:`TypeError` was missed when the other
:exc:`TypeError`\ s were converted. (Contributed by Serhiy Storchaka in
:issue:`18011`.) Note: this change was also inadvertently applied in Python
3.3.3.
* The :attr:`~cgi.FieldStorage.file` attribute is now automatically closed when
the creating :class:`cgi.FieldStorage` instance is garbage collected. If you
were pulling the file object out separately from the :class:`cgi.FieldStorage`
instance and not keeping the instance alive, then you should either store the
entire :class:`cgi.FieldStorage` instance or read the contents of the file
before the :class:`cgi.FieldStorage` instance is garbage collected.
* Calling ``read`` or ``write`` on a closed SSL socket now raises an
informative :exc:`ValueError` rather than the previous more mysterious
:exc:`AttributeError` (:issue:`9177`).
* :meth:`slice.indices` no longer produces an :exc:`OverflowError` for huge
values. As a consequence of this fix, :meth:`slice.indices` now raises a
:exc:`ValueError` if given a negative length; previously it returned nonsense
values (:issue:`14794`).
* The :class:`complex` constructor, unlike the :mod:`cmath` functions, was
incorrectly accepting :class:`float` values if an object's ``__complex__``
special method returned one. This now raises a :exc:`TypeError`.
(:issue:`16290`.)
* The :class:`int` constructor in 3.2 and 3.3 erroneously accepts :class:`float`
values for the *base* parameter. It is unlikely anyone was doing this, but
if so, it will now raise a :exc:`TypeError` (:issue:`16772`).
* Defaults for keyword-only arguments are now evaluated *after* defaults for
regular keyword arguments, instead of before. Hopefully no one wrote any
code that depends on the previous buggy behavior (:issue:`16967`).
* Stale thread states are now cleared after :func:`~os.fork`. This may cause
some system resources to be released that previously were incorrectly kept
perpetually alive (for example, database connections kept in thread-local
storage). (:issue:`17094`.)
* Parameter names in ``__annotations__`` dicts are now mangled properly,
similarly to ``__kwdefaults__``. (Contributed by Yury Selivanov in
:issue:`20625`.)
* :attr:`hashlib.hash.name` now always returns the identifier in lower case.
Previously some builtin hashes had uppercase names, but now that it is a
formal public interface the naming has been made consistent (:issue:`18532`).
* Because :mod:`unittest.TestSuite` now drops references to tests after they
are run, test harnesses that re-use a :class:`~unittest.TestSuite` to re-run
a set of tests may fail. Test suites should not be re-used in this fashion
since it means state is retained between test runs, breaking the test
isolation that :mod:`unittest` is designed to provide. However, if the lack
of isolation is considered acceptable, the old behavior can be restored by
creating a :mod:`~unittest.TestSuite` subclass that defines a
``_removeTestAtIndex`` method that does nothing (see
:meth:`.TestSuite.__iter__`) (:issue:`11798`).
* :mod:`unittest` now uses :mod:`argparse` for command line parsing. There are
certain invalid command forms that used to work that are no longer allowed;
in theory this should not cause backward compatibility issues since the
disallowed command forms didn't make any sense and are unlikely to be in use.
* The :func:`re.split`, :func:`re.findall`, and :func:`re.sub` functions, and
the :meth:`~re.match.group` and :meth:`~re.match.groups` methods of
``match`` objects now always return a *bytes* object when the string
to be matched is a :term:`bytes-like object`. Previously the return type
matched the input type, so if your code was depending on the return value
being, say, a ``bytearray``, you will need to change your code.
* :mod:`audioop` functions now raise an error immediately if passed string
input, instead of failing randomly later on (:issue:`16685`).
* The new *convert_charrefs* argument to :class:`~html.parser.HTMLParser`
currently defaults to ``False`` for backward compatibility, but will
eventually be changed to default to ``True``. It is recommended that you add
this keyword, with the appropriate value, to any
:class:`~html.parser.HTMLParser` calls in your code (:issue:`13633`).
* Since the *digestmod* argument to the :func:`hmac.new` function will in the
future have no default, all calls to :func:`hmac.new` should be changed to
explicitly specify a *digestmod* (:issue:`17276`).
* Calling :func:`sysconfig.get_config_var` with the ``SO`` key, or looking
``SO`` up in the results of a call to :func:`sysconfig.get_config_vars`
is deprecated. This key should be replaced by ``EXT_SUFFIX`` or
``SHLIB_SUFFIX``, depending on the context (:issue:`19555`).
* Any calls to ``open`` functions that specify ``U`` should be modified.
``U`` is ineffective in Python3 and will eventually raise an error if used.
Depending on the function, the equivalent of its old Python2 behavior can be
achieved using either a *newline* argument, or if necessary by wrapping the
stream in :mod:`~io.TextIOWrapper` to use its *newline* argument
(:issue:`15204`).
* If you use ``pyvenv`` in a script and desire that pip
*not* be installed, you must add ``--without-pip`` to your command
invocation.
* The default behavior of :func:`json.dump` and :func:`json.dumps` when
an indent is specified has changed: it no longer produces trailing
spaces after the item separating commas at the ends of lines. This
will matter only if you have tests that are doing white-space-sensitive
comparisons of such output (:issue:`16333`).
* :mod:`doctest` now looks for doctests in extension module ``__doc__``
strings, so if your doctest test discovery includes extension modules that
have things that look like doctests in them you may see test failures you've
never seen before when running your tests (:issue:`3158`).
* The :mod:`collections.abc` module has been slightly refactored as
part of the Python startup improvements. As a consequence of this, it is no
longer the case that importing :mod:`collections` automatically imports
:mod:`collections.abc`. If your program depended on the (undocumented)
implicit import, you will need to add an explicit ``import collections.abc``
(:issue:`20784`).
Changes in the C API
--------------------
* :c:func:`PyEval_EvalFrameEx`, :c:func:`PyObject_Repr`, and
:c:func:`PyObject_Str`, along with some other internal C APIs, now include
a debugging assertion that ensures they are not used in situations where
they may silently discard a currently active exception. In cases where
discarding the active exception is expected and desired (for example,
because it has already been saved locally with :c:func:`PyErr_Fetch` or
is being deliberately replaced with a different exception), an explicit
:c:func:`PyErr_Clear` call will be needed to avoid triggering the
assertion when invoking these operations (directly or indirectly) and
running against a version of Python that is compiled with assertions
enabled.
* :c:func:`PyErr_SetImportError` now sets :exc:`TypeError` when its **msg**
argument is not set. Previously only ``NULL`` was returned with no exception
set.
* The result of the :c:data:`PyOS_ReadlineFunctionPointer` callback must
now be a string allocated by :c:func:`PyMem_RawMalloc` or
:c:func:`PyMem_RawRealloc`, or ``NULL`` if an error occurred, instead of a
string allocated by :c:func:`PyMem_Malloc` or :c:func:`PyMem_Realloc`
(:issue:`16742`)
* :c:func:`PyThread_set_key_value` now always set the value. In Python
3.3, the function did nothing if the key already exists (if the current
value is a non-``NULL`` pointer).
* The ``f_tstate`` (thread state) field of the :c:type:`PyFrameObject`
structure has been removed to fix a bug: see :issue:`14432` for the
rationale.
Changed in 3.4.3
================
.. _pep-476:
PEP 476: Enabling certificate verification by default for stdlib http clients
-----------------------------------------------------------------------------
:mod:`http.client` and modules which use it, such as :mod:`urllib.request` and
:mod:`xmlrpc.client`, will now verify that the server presents a certificate
which is signed by a CA in the platform trust store and whose hostname matches
the hostname being requested by default, significantly improving security for
many applications.
For applications which require the old previous behavior, they can pass an
alternate context::
import urllib.request
import ssl
# This disables all verification
context = ssl._create_unverified_context()
# This allows using a specific certificate for the host, which doesn't need
# to be in the trust store
context = ssl.create_default_context(cafile="/path/to/file.crt")
urllib.request.urlopen("https://invalid-cert", context=context)