ardupilot/libraries/AP_HAL_ChibiOS/hwdef/common/stm32g4_mcuconf.h

300 lines
11 KiB
C

/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
this header is modelled on the one for the Nucleo64 G474 board from ChibiOS
*/
#pragma once
#ifndef STM32_LSECLK
#define STM32_LSECLK 32768U
#endif
#ifndef STM32_LSEDRV
#define STM32_LSEDRV (3U << 3U)
#endif
/*
* STM32G4xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#ifndef MCUCONF_H
#define MCUCONF_H
#define STM32G4xx_MCUCONF
#define STM32G473_MCUCONF
#define STM32G483_MCUCONF
#define STM32G474_MCUCONF
#define STM32G484_MCUCONF
#if STM32_HSECLK == 0U
// no crystal
#define STM32_HSE_ENABLED FALSE
#define STM32_HSI16_ENABLED TRUE
#define STM32_PLLM_VALUE 2
#define STM32_PLLSRC STM32_PLLSRC_HSI16
#elif STM32_HSECLK == 8000000U
#define STM32_HSE_ENABLED TRUE
#define STM32_HSI16_ENABLED FALSE
#define STM32_PLLM_VALUE 1
#define STM32_PLLSRC STM32_PLLSRC_HSE
#elif STM32_HSECLK == 16000000U
#define STM32_HSE_ENABLED TRUE
#define STM32_HSI16_ENABLED FALSE
#define STM32_PLLM_VALUE 2
#define STM32_PLLSRC STM32_PLLSRC_HSE
#elif STM32_HSECLK == 24000000U
#define STM32_HSE_ENABLED TRUE
#define STM32_HSI16_ENABLED FALSE
#define STM32_PLLM_VALUE 3
#define STM32_PLLSRC STM32_PLLSRC_HSE
#else
#error "Unsupported HSE clock"
#endif
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_VOS STM32_VOS_RANGE1
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
#define STM32_PWR_CR3 (PWR_CR3_EIWF)
#define STM32_PWR_CR4 (0U)
#define STM32_HSI48_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLLRCLK
#define STM32_PLLN_VALUE 42
#define STM32_PLLPDIV_VALUE 0
#define STM32_PLLP_VALUE 7
#define STM32_PLLQ_VALUE 8
#define STM32_PLLR_VALUE 2
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV1
#define STM32_PPRE2 STM32_PPRE2_DIV1
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_MCOPRE STM32_MCOPRE_DIV1
#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
/*
* Peripherals clock sources.
*/
#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
#define STM32_USART3SEL STM32_USART3SEL_SYSCLK
#define STM32_UART4SEL STM32_UART4SEL_SYSCLK
#define STM32_UART5SEL STM32_UART5SEL_SYSCLK
#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1
#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1
#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1
#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1
#define STM32_I2C4SEL STM32_I2C4SEL_PCLK1
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK
#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK
#if STM32_HSECLK == 0U
#define STM32_FDCANSEL STM32_FDCANSEL_PLLQCLK
#else
#define STM32_FDCANSEL STM32_FDCANSEL_HSE
#endif
#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK
#define STM32_ADC345SEL STM32_ADC345SEL_PLLPCLK
#define STM32_QSPISEL STM32_QSPISEL_SYSCLK
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
/*
* IRQ system settings.
*/
#define STM32_IRQ_EXTI0_PRIORITY 6
#define STM32_IRQ_EXTI1_PRIORITY 6
#define STM32_IRQ_EXTI2_PRIORITY 6
#define STM32_IRQ_EXTI3_PRIORITY 6
#define STM32_IRQ_EXTI4_PRIORITY 6
#define STM32_IRQ_EXTI5_9_PRIORITY 6
#define STM32_IRQ_EXTI10_15_PRIORITY 6
#define STM32_IRQ_EXTI164041_PRIORITY 6
#define STM32_IRQ_EXTI17_PRIORITY 6
#define STM32_IRQ_EXTI18_PRIORITY 6
#define STM32_IRQ_EXTI19_PRIORITY 6
#define STM32_IRQ_EXTI20_PRIORITY 6
#define STM32_IRQ_EXTI212229_PRIORITY 6
#define STM32_IRQ_EXTI30_32_PRIORITY 6
#define STM32_IRQ_EXTI33_PRIORITY 6
#define STM32_IRQ_FDCAN1_PRIORITY 10
#define STM32_IRQ_FDCAN2_PRIORITY 10
#define STM32_IRQ_FDCAN3_PRIORITY 10
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
#define STM32_IRQ_TIM1_CC_PRIORITY 7
#define STM32_IRQ_TIM2_PRIORITY 7
#define STM32_IRQ_TIM3_PRIORITY 7
#define STM32_IRQ_TIM4_PRIORITY 7
#define STM32_IRQ_TIM5_PRIORITY 7
#define STM32_IRQ_TIM6_PRIORITY 7
#define STM32_IRQ_TIM7_PRIORITY 7
#define STM32_IRQ_TIM8_UP_PRIORITY 7
#define STM32_IRQ_TIM8_CC_PRIORITY 7
#define STM32_IRQ_TIM20_UP_PRIORITY 7
#define STM32_IRQ_TIM20_CC_PRIORITY 7
#define STM32_IRQ_USART1_PRIORITY 12
#define STM32_IRQ_USART2_PRIORITY 12
#define STM32_IRQ_USART3_PRIORITY 12
#define STM32_IRQ_UART4_PRIORITY 12
#define STM32_IRQ_UART5_PRIORITY 12
#define STM32_IRQ_LPUART1_PRIORITY 12
/*
* ADC driver system settings.
*/
#define STM32_ADC_DUAL_MODE FALSE
#define STM32_ADC_COMPACT_SAMPLES FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC2_DMA_PRIORITY 2
#define STM32_ADC_ADC3_DMA_PRIORITY 2
#define STM32_ADC_ADC4_DMA_PRIORITY 2
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
#define STM32_ADC_ADC345_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2
#define STM32_ADC_ADC345_PRESC ADC_CCR_PRESC_DIV2
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_FDCAN1 FALSE
#define STM32_CAN_USE_FDCAN2 FALSE
#define STM32_CAN_USE_FDCAN3 FALSE
/*
* DAC driver system settings.
*/
#define STM32_DAC_DUAL_MODE FALSE
#define STM32_DAC_USE_DAC1_CH1 FALSE
#define STM32_DAC_USE_DAC1_CH2 FALSE
#define STM32_DAC_USE_DAC2_CH1 FALSE
#define STM32_DAC_USE_DAC3_CH1 FALSE
#define STM32_DAC_USE_DAC3_CH2 FALSE
#define STM32_DAC_USE_DAC4_CH1 FALSE
#define STM32_DAC_USE_DAC4_CH2 FALSE
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC4_CH1_IRQ_PRIORITY 10
#define STM32_DAC_DAC4_CH2_IRQ_PRIORITY 10
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
#define STM32_DAC_DAC2_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2
#define STM32_DAC_DAC4_CH1_DMA_PRIORITY 2
#define STM32_DAC_DAC4_CH2_DMA_PRIORITY 2
/*
* I2C driver system settings.
*/
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
#define STM32_I2C_I2C4_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_I2C3_DMA_PRIORITY 3
#define STM32_I2C_I2C4_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* SPI driver system settings.
*/
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI4_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_SPI4_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#ifndef STM32_ST_USE_TIMER
#define STM32_ST_USE_TIMER 2
#endif
/*
* TRNG driver system settings.
*/
#define STM32_TRNG_USE_RNG1 FALSE
/*
* UART driver system settings.
*/
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_UART4_DMA_PRIORITY 0
#define STM32_UART_UART5_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 FALSE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
/*
* WDG driver system settings.
*/
#define STM32_WDG_USE_IWDG FALSE
/*
* WSPI driver system settings.
*/
#define STM32_WSPI_USE_QUADSPI1 FALSE
#endif /* MCUCONF_H */