Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/libraries/AP_HAL_ChibiOS/AnalogIn.cpp

874 lines
25 KiB
C++
Raw Blame History

/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Code by Andrew Tridgell and Siddharth Bharat Purohit
*/
#include <AP_HAL/AP_HAL.h>
#include "ch.h"
#include "hal.h"
#include <AP_Math/AP_Math.h>
#if HAL_USE_ADC == TRUE && !defined(HAL_DISABLE_ADC_DRIVER)
#include "AnalogIn.h"
#if HAL_WITH_IO_MCU
#include <AP_IOMCU/AP_IOMCU.h>
extern AP_IOMCU iomcu;
#endif
#include "hwdef/common/stm32_util.h"
// MAVLink is included as we send a mavlink message as part of debug,
// and also use the MAV_POWER flags below in update_power_flags
#include <GCS_MAVLink/GCS_MAVLink.h>
#ifndef STM32_ADC_DUAL_MODE
#define STM32_ADC_DUAL_MODE FALSE
#endif
#define ANLOGIN_DEBUGGING 0
// base voltage scaling for 12 bit 3.3V ADC
#define VOLTAGE_SCALING (3.3f / ((1 << 12) - 1))
// voltage divider is usually 1/(10/(20+10))
#ifndef HAL_IOMCU_VSERVO_SCALAR
#define HAL_IOMCU_VSERVO_SCALAR 3
#endif
// voltage divider is usually not present
#ifndef HAL_IOMCU_VRSSI_SCALAR
#define HAL_IOMCU_VRSSI_SCALAR 1
#endif
#if ANLOGIN_DEBUGGING
# define Debug(fmt, args ...) do {printf("%s:%d: " fmt "\n", __FUNCTION__, __LINE__, ## args); } while(0)
#else
# define Debug(fmt, args ...)
#endif
extern const AP_HAL::HAL& hal;
using namespace ChibiOS;
// special pins
#define ANALOG_SERVO_VRSSI_PIN 103
/*
scaling table between ADC count and actual input voltage, to account
for voltage dividers on the board.
*/
const AnalogIn::pin_info AnalogIn::pin_config[] = { HAL_ANALOG_PINS };
#ifdef HAL_ANALOG2_PINS
const AnalogIn::pin_info AnalogIn::pin_config_2[] = { HAL_ANALOG2_PINS };
#define ADC2_GRP1_NUM_CHANNELS ARRAY_SIZE(AnalogIn::pin_config_2)
#endif
#if defined(HAL_ANALOG3_PINS) || HAL_WITH_MCU_MONITORING
#if HAL_WITH_MCU_MONITORING
// internal ADC channels (from H7 reference manual)
#define ADC3_VSENSE_CHAN 18
#define ADC3_VREFINT_CHAN 19
#define ADC3_VBAT4_CHAN 17
#define HAL_MCU_MONITORING_PINS {ADC3_VBAT4_CHAN, 252, 3.30/4096}, {ADC3_VSENSE_CHAN, 253, 3.30/4096}, {ADC3_VREFINT_CHAN, 254, 3.30/4096}
#else
#define HAL_MCU_MONITORING_PINS
#endif
#ifndef HAL_ANALOG3_PINS
#define HAL_ANALOG3_PINS
#endif
const AnalogIn::pin_info AnalogIn::pin_config_3[] = { HAL_ANALOG3_PINS HAL_MCU_MONITORING_PINS};
#define ADC3_GRP1_NUM_CHANNELS ARRAY_SIZE(AnalogIn::pin_config_3)
#endif
#define ADC_GRP1_NUM_CHANNELS ARRAY_SIZE(AnalogIn::pin_config)
#if defined(ADC_CFGR_RES_16BITS)
// on H7 we use 16 bit ADC transfers, giving us more resolution. We
// need to scale by 1/16 to match the 12 bit scale factors in hwdef.dat
#define ADC_BOARD_SCALING (1.0/16)
#else
#define ADC_BOARD_SCALING 1
#endif
// samples filled in by ADC DMA engine
adcsample_t *AnalogIn::samples[];
uint32_t *AnalogIn::sample_sum[];
uint32_t AnalogIn::sample_count[];
AnalogSource::AnalogSource(int16_t pin) :
_pin(pin)
{
}
float AnalogSource::read_average()
{
WITH_SEMAPHORE(_semaphore);
if (_sum_count == 0) {
return _value;
}
_value = _sum_value / _sum_count;
_value_ratiometric = _sum_ratiometric / _sum_count;
_sum_value = 0;
_sum_ratiometric = 0;
_sum_count = 0;
return _value;
}
float AnalogSource::read_latest()
{
return _latest_value;
}
/*
return scaling from ADC count to Volts
*/
float AnalogSource::_pin_scaler(void)
{
float scaling = VOLTAGE_SCALING;
for (uint8_t i=0; i<ADC_GRP1_NUM_CHANNELS; i++) {
if (AnalogIn::pin_config[i].analog_pin == _pin && (_pin != ANALOG_INPUT_NONE)) {
scaling = AnalogIn::pin_config[i].scaling;
break;
}
}
return scaling;
}
/*
return voltage in Volts
*/
float AnalogSource::voltage_average()
{
return _pin_scaler() * read_average();
}
/*
return voltage in Volts, assuming a ratiometric sensor powered by
the 5V rail
*/
float AnalogSource::voltage_average_ratiometric()
{
voltage_average();
return _pin_scaler() * _value_ratiometric;
}
/*
return voltage in Volts
*/
float AnalogSource::voltage_latest()
{
return _pin_scaler() * read_latest();
}
bool AnalogSource::set_pin(uint8_t pin)
{
if (pin == ANALOG_INPUT_NONE) {
return false;
}
if (_pin == pin) {
return true;
}
bool found_pin = false;
if (pin == ANALOG_SERVO_VRSSI_PIN) {
found_pin = true;
} else {
for (uint8_t i=0; i<ADC_GRP1_NUM_CHANNELS; i++) {
if (AnalogIn::pin_config[i].analog_pin == pin) {
found_pin = true;
break;
}
}
}
if (!found_pin) {
return false;
}
WITH_SEMAPHORE(_semaphore);
_pin = pin;
_sum_value = 0;
_sum_ratiometric = 0;
_sum_count = 0;
_latest_value = 0;
_value = 0;
_value_ratiometric = 0;
return true;
}
/*
apply a reading in ADC counts
*/
void AnalogSource::_add_value(float v, float vcc5V)
{
WITH_SEMAPHORE(_semaphore);
_latest_value = v;
_sum_value += v;
if (vcc5V < 3.0f) {
_sum_ratiometric += v;
} else {
// this compensates for changes in the 5V rail relative to the
// 3.3V reference used by the ADC.
_sum_ratiometric += v * 5.0f / vcc5V;
}
_sum_count++;
if (_sum_count == 254) {
_sum_value /= 2;
_sum_ratiometric /= 2;
_sum_count /= 2;
}
}
/*
return the channel number
*/
uint8_t AnalogIn::get_pin_channel(uint8_t adc_index, uint8_t pin_index)
{
switch(adc_index) {
case 0:
osalDbgAssert(pin_index < ADC_GRP1_NUM_CHANNELS, "invalid pin_index");
return pin_config[pin_index].channel;
#if defined(HAL_ANALOG2_PINS)
case 1:
osalDbgAssert(pin_index < ADC2_GRP1_NUM_CHANNELS, "invalid pin_index");
return pin_config_2[pin_index].channel;
#endif
#if defined(HAL_ANALOG3_PINS)
case 2:
osalDbgAssert(pin_index < ADC3_GRP1_NUM_CHANNELS, "invalid pin_index");
return pin_config_3[pin_index].channel;
#endif
};
osalDbgAssert(false, "invalid adc_index");
return 255;
}
uint8_t AnalogIn::get_analog_pin(uint8_t adc_index, uint8_t pin_index)
{
switch(adc_index) {
case 0:
return pin_config[pin_index].analog_pin;
#if defined(HAL_ANALOG2_PINS)
case 1:
return pin_config_2[pin_index].analog_pin;
#endif
#if defined(HAL_ANALOG3_PINS)
case 2:
return pin_config_3[pin_index].analog_pin;
#endif
};
osalDbgAssert(false, "invalid adc_index");
return 255;
}
/*
return scaling
*/
float AnalogIn::get_pin_scaling(uint8_t adc_index, uint8_t pin_index)
{
switch(adc_index) {
case 0:
return pin_config[pin_index].scaling;
#if defined(HAL_ANALOG2_PINS)
case 1:
return pin_config_2[pin_index].scaling;
#endif
#if defined(HAL_ANALOG3_PINS)
case 2:
return pin_config_3[pin_index].scaling;
#endif
};
osalDbgAssert(false, "invalid adc_index");
return 0;
}
/*
callback from ADC driver when sample buffer is filled
*/
#if HAL_WITH_MCU_MONITORING
static uint16_t min_vrefint, max_vrefint;
#endif
void AnalogIn::adccallback(ADCDriver *adcp)
{
uint8_t index = get_adc_index(adcp);
if (index >= HAL_NUM_ANALOG_INPUTS) {
return;
}
const uint16_t *buffer = (uint16_t*)samples[index];
uint8_t num_grp_channels = get_num_grp_channels(index);
#if STM32_ADC_DUAL_MODE
if (index == 0) {
stm32_cacheBufferInvalidate(buffer, sizeof(uint16_t)*ADC_DMA_BUF_DEPTH*num_grp_channels*2);
} else
#endif
{
stm32_cacheBufferInvalidate(buffer, sizeof(uint16_t)*ADC_DMA_BUF_DEPTH*num_grp_channels);
}
for (uint8_t i = 0; i < ADC_DMA_BUF_DEPTH; i++) {
for (uint8_t j = 0; j < num_grp_channels; j++) {
sample_sum[index][j] += *buffer;
#if HAL_WITH_MCU_MONITORING
if (j == (num_grp_channels-1) && index == 2) {
// record min/max for MCU Vcc
if (min_vrefint == 0 ||
min_vrefint > *buffer) {
min_vrefint = *buffer;
}
if (max_vrefint == 0 ||
max_vrefint < *buffer) {
max_vrefint = *buffer;
}
}
#endif
buffer++;
#if STM32_ADC_DUAL_MODE
if (index == 0) {
// also sum the second ADC for dual mode
sample_sum[1][j] += *buffer;
buffer++;
}
#endif
}
}
#if STM32_ADC_DUAL_MODE
if (index == 0) {
// also set the sample count for the second ADC for dual mode
sample_count[1] += ADC_DMA_BUF_DEPTH;
}
#endif
sample_count[index] += ADC_DMA_BUF_DEPTH;
}
uint8_t AnalogIn::get_adc_index(ADCDriver* adcp)
{
if (adcp == &ADCD1) {
return 0;
}
#if defined(HAL_ANALOG2_PINS) && !STM32_ADC_DUAL_MODE
if (adcp == &ADCD2) {
return 1;
}
#endif
#if defined(HAL_ANALOG3_PINS)
if (adcp == &ADCD3) {
return 2;
}
#endif
osalDbgAssert(false, "invalid ADC");
return 255;
}
uint8_t AnalogIn::get_num_grp_channels(uint8_t index)
{
switch (index) {
case 0:
return ADC_GRP1_NUM_CHANNELS;
#if defined(HAL_ANALOG2_PINS)
case 1:
return ADC2_GRP1_NUM_CHANNELS;
#endif
#if defined(HAL_ANALOG3_PINS)
case 2:
return ADC3_GRP1_NUM_CHANNELS;
#endif
};
osalDbgAssert(false, "invalid adc_index");
return 0;
}
/*
setup adc peripheral to capture samples with DMA into a buffer
*/
void AnalogIn::init()
{
#if STM32_ADC_DUAL_MODE
static_assert(sizeof(uint32_t) == sizeof(adcsample_t), "adcsample_t must be uint32_t");
#else
static_assert(sizeof(uint16_t) == sizeof(adcsample_t), "adcsample_t must be uint16_t");
#endif
setup_adc(0);
#if defined(HAL_ANALOG2_PINS)
setup_adc(1);
#endif
#if defined(HAL_ANALOG3_PINS)
setup_adc(2);
#endif
}
void AnalogIn::setup_adc(uint8_t index)
{
uint8_t num_grp_channels = get_num_grp_channels(index);
if (num_grp_channels == 0) {
return;
}
ADCDriver *adcp;
switch (index) {
case 0:
adcp = &ADCD1;
break;
// if we are in dual mode then ADC2 is setup along with ADC1
// so we don't need to setup ADC2 separately
#if defined(HAL_ANALOG2_PINS) && !STM32_ADC_DUAL_MODE
case 1:
adcp = &ADCD2;
break;
#endif
#if defined(HAL_ANALOG3_PINS)
case 2:
adcp = &ADCD3;
break;
#endif
default:
return;
};
#if STM32_ADC_DUAL_MODE
// In ADC Dual mode we use ADC_SAMPLE_SIZE as 32 bits for ADCs doing shared sampling, then we need to
// split the samples into two buffers at read time for other ADCs ChibiOS HAL uses 16 bit sample size
// so ADC_SAMPLE_SIZE is actually 16 bits for ADCs even though its set to 32 bits
if (index == 0) {
// we need to setup the second ADC as well
num_grp_channels = num_grp_channels * 2;
samples[0] = (adcsample_t *)hal.util->malloc_type(sizeof(uint16_t)*ADC_DMA_BUF_DEPTH*num_grp_channels, AP_HAL::Util::MEM_DMA_SAFE);
if (samples[0] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
sample_sum[0] = (uint32_t *)malloc(sizeof(uint32_t)*num_grp_channels);
if (sample_sum[0] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
sample_sum[1] = (uint32_t *)malloc(sizeof(uint32_t)*num_grp_channels);
if (sample_sum[1] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
} else {
samples[index] = (adcsample_t *)hal.util->malloc_type(sizeof(uint16_t)*ADC_DMA_BUF_DEPTH*num_grp_channels, AP_HAL::Util::MEM_DMA_SAFE);
if (samples[index] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
sample_sum[index] = (uint32_t *)malloc(sizeof(uint32_t)*num_grp_channels);
if (sample_sum[index] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
}
#else
samples[index] = (adcsample_t *)hal.util->malloc_type(sizeof(adcsample_t)*ADC_DMA_BUF_DEPTH*num_grp_channels, AP_HAL::Util::MEM_DMA_SAFE);
if (samples[index] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
sample_sum[index] = (uint32_t *)malloc(sizeof(uint32_t)*num_grp_channels);
if (sample_sum[index] == nullptr) {
// panic if we can't allocate memory
goto failed_alloc;
}
#endif
adcStart(adcp, NULL);
#if HAL_WITH_MCU_MONITORING
if (index == 2) {
adcSTM32EnableVREF(&ADCD3);
adcSTM32EnableTS(&ADCD3);
adcSTM32EnableVBAT(&ADCD3);
}
#endif
memset(&adcgrpcfg[index], 0, sizeof(adcgrpcfg[index]));
adcgrpcfg[index].circular = true;
adcgrpcfg[index].num_channels = num_grp_channels;
adcgrpcfg[index].end_cb = adccallback;
#if defined(ADC_CFGR_RES_16BITS)
// use 16 bit resolution
adcgrpcfg[index].cfgr = ADC_CFGR_CONT | ADC_CFGR_RES_16BITS;
#elif defined(ADC_CFGR_RES_12BITS)
// use 12 bit resolution
adcgrpcfg[index].cfgr = ADC_CFGR_CONT | ADC_CFGR_RES_12BITS;
#else
// use 12 bit resolution with ADCv1 or ADCv2
adcgrpcfg[index].sqr1 = ADC_SQR1_NUM_CH(num_grp_channels);
adcgrpcfg[index].cr2 = ADC_CR2_SWSTART;
#endif
#if STM32_ADC_DUAL_MODE
adcgrpcfg[index].ccr = 0;
if (index == 0) {
num_grp_channels /= 2;
}
#endif
for (uint8_t i=0; i<num_grp_channels; i++) {
uint8_t chan = get_pin_channel(index, i);
// setup cycles per sample for the channel
#if defined(STM32H7)
adcgrpcfg[index].pcsel |= (1<<chan);
adcgrpcfg[index].smpr[chan/10] |= ADC_SMPR_SMP_384P5 << (3*(chan%10));
if (i < 4) {
adcgrpcfg[index].sqr[0] |= chan << (6*(i+1));
} else if (i < 9) {
adcgrpcfg[index].sqr[1] |= chan << (6*(i-4));
} else {
adcgrpcfg[index].sqr[2] |= chan << (6*(i-9));
}
#elif defined(STM32F3) || defined(STM32G4) || defined(STM32L4) || defined(STM32L4PLUS)
#if defined(STM32G4) || defined(STM32L4)
adcgrpcfg[index].smpr[chan/10] |= ADC_SMPR_SMP_640P5 << (3*(chan%10));
#else
adcgrpcfg[index].smpr[chan/10] |= ADC_SMPR_SMP_601P5 << (3*(chan%10));
#endif
// setup channel sequence
if (i < 4) {
adcgrpcfg[index].sqr[0] |= chan << (6*(i+1));
} else if (i < 9) {
adcgrpcfg[index].sqr[1] |= chan << (6*(i-4));
} else {
adcgrpcfg[index].sqr[2] |= chan << (6*(i-9));
}
#else
if (chan < 10) {
adcgrpcfg[index].smpr2 |= ADC_SAMPLE_480 << (3*chan);
} else {
adcgrpcfg[index].smpr1 |= ADC_SAMPLE_480 << (3*(chan-10));
}
// setup channel sequence
if (i < 6) {
adcgrpcfg[index].sqr3 |= chan << (5*i);
} else if (i < 12) {
adcgrpcfg[index].sqr2 |= chan << (5*(i-6));
} else {
adcgrpcfg[index].sqr1 |= chan << (5*(i-12));
}
#endif
}
#if STM32_ADC_DUAL_MODE
// assert that ADC1 and ADC2 have the same number of channels
static_assert(ARRAY_SIZE(AnalogIn::pin_config) == ARRAY_SIZE(AnalogIn::pin_config_2), "ADC1 and ADC2 must have same num of channels");
if (index == 0) {
for (uint8_t i=0; i<num_grp_channels; i++) {
uint8_t chan = get_pin_channel(1, i);
// setup cycles per sample for the channel
adcgrpcfg[0].pcsel |= (1<<chan);
adcgrpcfg[0].ssmpr[chan/10] |= ADC_SMPR_SMP_384P5 << (3*(chan%10));
if (i < 4) {
adcgrpcfg[0].ssqr[0] |= chan << (6*(i+1));
} else if (i < 9) {
adcgrpcfg[0].ssqr[1] |= chan << (6*(i-4));
} else {
adcgrpcfg[0].ssqr[2] |= chan << (6*(i-9));
}
}
}
#endif
adcStartConversion(adcp, &adcgrpcfg[index], samples[index], ADC_DMA_BUF_DEPTH);
return;
failed_alloc:
AP_HAL::panic("Failed to allocate ADC DMA buffer");
}
/*
calculate average sample since last read for all channels
*/
void AnalogIn::read_adc(uint8_t index, uint32_t *val)
{
chSysLock();
uint8_t num_grp_channels = get_num_grp_channels(index);
if (num_grp_channels == 0) {
chSysUnlock();
return;
}
for (uint8_t i = 0; i < num_grp_channels; i++) {
val[i] = sample_sum[index][i] / sample_count[index];
}
memset(sample_sum[index], 0, sizeof(uint32_t) * num_grp_channels);
sample_count[index] = 0;
#if HAL_WITH_MCU_MONITORING
if (index == 2) {
// copy the min/max values of vrefint if we are reading ADC3
if (_mcu_vrefint_min == 0 ||
_mcu_vrefint_min > min_vrefint) {
_mcu_vrefint_min = min_vrefint;
}
if (_mcu_vrefint_max == 0 ||
_mcu_vrefint_max < max_vrefint) {
_mcu_vrefint_max = max_vrefint;
}
// also reset the min/max values
min_vrefint = 0;
max_vrefint = 0;
// accumulate temperature and Vcc readings
_mcu_monitor_temperature_accum += val[num_grp_channels - 2];
_mcu_monitor_voltage_accum += val[num_grp_channels - 1];
_mcu_monitor_sample_count++;
}
#endif
chSysUnlock();
}
/*
read the data from an ADC index
*/
void AnalogIn::timer_tick_adc(uint8_t index)
{
const uint8_t num_grp_channels = get_num_grp_channels(index);
uint32_t buf_adc[num_grp_channels];
/* read all channels available on index ADC*/
read_adc(index, buf_adc);
// match the incoming channels to the currently active pins
for (uint8_t i=0; i < num_grp_channels; i++) {
#ifdef ANALOG_VCC_5V_PIN
if (get_analog_pin(index, i) == ANALOG_VCC_5V_PIN) {
// record the Vcc value for later use in
// voltage_average_ratiometric()
_board_voltage = buf_adc[i] * get_pin_scaling(index, i) * ADC_BOARD_SCALING;
}
#endif
#ifdef FMU_SERVORAIL_ADC_PIN
if (get_analog_pin(index, i) == FMU_SERVORAIL_ADC_PIN) {
_servorail_voltage = buf_adc[i] * get_pin_scaling(index, i) * ADC_BOARD_SCALING;
}
#endif
}
for (uint8_t i=0; i<num_grp_channels; i++) {
Debug("adc%u chan %u value=%f\n",
(unsigned)index+1,
(unsigned)get_pin_channel(index, i),
(float)buf_adc[i] * ADC_BOARD_SCALING * VOLTAGE_SCALING);
for (uint8_t j=0; j < ANALOG_MAX_CHANNELS; j++) {
ChibiOS::AnalogSource *c = _channels[j];
if (c != nullptr) {
if ((get_analog_pin(index, i) == c->_pin) && (c->_pin != ANALOG_INPUT_NONE)) {
// add a value
c->_add_value(buf_adc[i] * ADC_BOARD_SCALING, _board_voltage);
} else if (c->_pin == ANALOG_SERVO_VRSSI_PIN) {
c->_add_value(_rssi_voltage / VOLTAGE_SCALING, 0);
}
}
}
}
}
/*
called at 1kHz
*/
void AnalogIn::_timer_tick(void)
{
// read adc at 100Hz
uint32_t now = AP_HAL::micros();
uint32_t delta_t = now - _last_run;
if (delta_t < 10000) {
return;
}
_last_run = now;
// update power status flags
update_power_flags();
#if HAL_WITH_IO_MCU
// handle special inputs from IOMCU
_rssi_voltage = iomcu.get_vrssi_adc_count() * (VOLTAGE_SCALING * HAL_IOMCU_VRSSI_SCALAR);
#endif
/*
update each of our ADCs
*/
timer_tick_adc(0);
#if defined(HAL_ANALOG2_PINS)
timer_tick_adc(1);
#endif
#if defined(HAL_ANALOG3_PINS)
timer_tick_adc(2);
#endif
#if HAL_WITH_IO_MCU
_servorail_voltage = iomcu.get_vservo_adc_count() * (VOLTAGE_SCALING * HAL_IOMCU_VSERVO_SCALAR);
#endif
#if HAL_WITH_MCU_MONITORING
// 20Hz temperature and ref voltage
static uint32_t last_mcu_temp_us;
if (now - last_mcu_temp_us > 50000 &&
hal.scheduler->is_system_initialized()) {
last_mcu_temp_us = now;
// factory calibration values
const float TS_CAL1 = *(const volatile uint16_t *)0x1FF1E820;
const float TS_CAL2 = *(const volatile uint16_t *)0x1FF1E840;
const float VREFINT_CAL = *(const volatile uint16_t *)0x1FF1E860;
_mcu_temperature = ((110 - 30) / (TS_CAL2 - TS_CAL1)) * (float(_mcu_monitor_temperature_accum/_mcu_monitor_sample_count) - TS_CAL1) + 30;
_mcu_voltage = 3.3 * VREFINT_CAL / float((_mcu_monitor_voltage_accum/_mcu_monitor_sample_count)+0.001);
_mcu_monitor_voltage_accum = 0;
_mcu_monitor_temperature_accum = 0;
_mcu_monitor_sample_count = 0;
// note min/max swap due to inversion
_mcu_voltage_min = 3.3 * VREFINT_CAL / float(_mcu_vrefint_max+0.001);
_mcu_voltage_max = 3.3 * VREFINT_CAL / float(_mcu_vrefint_min+0.001);
}
#endif
}
AP_HAL::AnalogSource* AnalogIn::channel(int16_t pin)
{
WITH_SEMAPHORE(_semaphore);
for (uint8_t j=0; j<ANALOG_MAX_CHANNELS; j++) {
if (_channels[j] == nullptr) {
_channels[j] = new AnalogSource(pin);
return _channels[j];
}
}
osalDbgAssert(false, "Out of analog channels");
DEV_PRINTF("Out of analog channels\n");
return nullptr;
}
/*
update power status flags
*/
void AnalogIn::update_power_flags(void)
{
uint16_t flags = 0;
/*
primary "brick" power supply valid pin. Some boards have this
active high, some active low. Use nVALID for active low, VALID
for active high
*/
#if defined(HAL_GPIO_PIN_VDD_BRICK_VALID)
if (palReadLine(HAL_GPIO_PIN_VDD_BRICK_VALID) == 1) {
flags |= MAV_POWER_STATUS_BRICK_VALID;
}
#elif defined(HAL_GPIO_PIN_VDD_BRICK_nVALID)
if (palReadLine(HAL_GPIO_PIN_VDD_BRICK_nVALID) == 0) {
flags |= MAV_POWER_STATUS_BRICK_VALID;
}
#endif
/*
secondary "brick" power supply valid pin. This is servo rail
power valid on some boards. Some boards have this active high,
some active low. Use nVALID for active low, VALID for active
high. This maps to the MAV_POWER_STATUS_SERVO_VALID in mavlink
(as this was first added for older boards that used servo rail
for backup power)
*/
#if defined(HAL_GPIO_PIN_VDD_BRICK2_VALID)
if (palReadLine(HAL_GPIO_PIN_VDD_BRICK_VALID) == 1) {
flags |= MAV_POWER_STATUS_SERVO_VALID;
}
#elif defined(HAL_GPIO_PIN_VDD_BRICK2_nVALID)
if (palReadLine(HAL_GPIO_PIN_VDD_BRICK2_nVALID) == 0) {
flags |= MAV_POWER_STATUS_SERVO_VALID;
}
#endif
/*
USB power. This can be VBUS_VALID, VBUS_nVALID or just
VBUS. Some boards have both a valid pin and VBUS. The VBUS pin
is an analog pin that could be used to read USB voltage.
*/
#if defined(HAL_GPIO_PIN_VBUS_VALID)
if (palReadLine(HAL_GPIO_PIN_VBUS_VALID) == 1) {
flags |= MAV_POWER_STATUS_USB_CONNECTED;
}
#elif defined(HAL_GPIO_PIN_VBUS_nVALID)
if (palReadLine(HAL_GPIO_PIN_VBUS_nVALID) == 0) {
flags |= MAV_POWER_STATUS_USB_CONNECTED;
}
#elif defined(HAL_GPIO_PIN_VBUS)
if (palReadLine(HAL_GPIO_PIN_VBUS) == 1) {
flags |= MAV_POWER_STATUS_USB_CONNECTED;
}
#endif
/*
overcurrent on "high power" peripheral rail.
*/
#if defined(HAL_GPIO_PIN_VDD_5V_HIPOWER_OC)
if (palReadLine(HAL_GPIO_PIN_VDD_5V_HIPOWER_OC) == 1) {
flags |= MAV_POWER_STATUS_PERIPH_HIPOWER_OVERCURRENT;
}
#elif defined(HAL_GPIO_PIN_VDD_5V_HIPOWER_nOC)
if (palReadLine(HAL_GPIO_PIN_VDD_5V_HIPOWER_nOC) == 0) {
flags |= MAV_POWER_STATUS_PERIPH_HIPOWER_OVERCURRENT;
}
#endif
/*
overcurrent on main peripheral rail.
*/
#if defined(HAL_GPIO_PIN_VDD_5V_PERIPH_OC)
if (palReadLine(HAL_GPIO_PIN_VDD_5V_PERIPH_OC) == 1) {
flags |= MAV_POWER_STATUS_PERIPH_OVERCURRENT;
}
#elif defined(HAL_GPIO_PIN_VDD_5V_PERIPH_nOC)
if (palReadLine(HAL_GPIO_PIN_VDD_5V_PERIPH_nOC) == 0) {
flags |= MAV_POWER_STATUS_PERIPH_OVERCURRENT;
}
#endif
#if defined(HAL_GPIO_PIN_VDD_SERVO_VALID)
#error "building with old hwdef.dat"
#endif
#if 0
/*
this bit of debug code is useful when testing the polarity of
VALID pins for power sources. It allows you to see the change on
USB with a 3s delay, so you can see USB changes by unplugging
and re-inserting USB power
*/
static uint32_t last_change_ms;
uint32_t now = AP_HAL::millis();
if (_power_flags != flags) {
if (last_change_ms == 0) {
last_change_ms = now;
} else if (now - last_change_ms > 3000) {
last_change_ms = 0;
hal.console->printf("POWR: 0x%02x -> 0x%02x\n", _power_flags, flags);
_power_flags = flags;
}
if (hal.util->get_soft_armed()) {
// the power status has changed while armed
flags |= MAV_POWER_STATUS_CHANGED;
}
return;
}
#endif
if (_power_flags != 0 &&
_power_flags != flags &&
hal.util->get_soft_armed()) {
// the power status has changed while armed
flags |= MAV_POWER_STATUS_CHANGED;
}
_accumulated_power_flags |= flags;
_power_flags = flags;
}
#endif // HAL_USE_ADC
Reference in New Issue View Git Blame Copy Permalink