ardupilot/ArduPlane
Andrew Tridgell a0f69e06a7 Plane: prevent baro reset from OVERRIDE_CHAN
using OVERRIDE_CHAN would cause a baro reset as it would mean we are
temporarily disarmed, and the "reset baro and GPS when disarmed" check
would reset the baro

Now we only do the mixer update if disarmed
2014-11-29 19:55:25 +11:00
..
APM_Config.h Plane: removed HIL_MODE_ATTITUDE 2013-04-12 17:44:40 +10:00
APM_Config.h.reference Plane: cleanup HIL defines 2014-02-15 05:29:46 +11:00
ArduPlane.pde Plane: mark development version 3.2.1alpha 2014-11-29 06:59:47 +11:00
Attitude.pde Plane: use set_radio_trimmed() for flaperons 2014-11-25 08:20:10 +11:00
GCS_Mavlink.pde Plane: if SKIP_GYRO_CAL is set the do a gyro cal on 3D accel cal 2014-11-21 19:09:19 +11:00
Log.pde Plane: log raw pressure and offset 2014-11-13 17:49:14 +11:00
Makefile Plane: cleanup cruft in Makefile 2013-10-13 21:41:01 +11:00
Parameters.h Plane: added STALL_PREVENTION option 2014-11-13 14:06:00 +11:00
Parameters.pde Plane: small improvement to takeoff docs 2014-11-13 14:24:37 +11:00
altitude.pde Plane: lowpass the rangefinder correction, not height 2014-08-27 18:25:17 +10:00
climb_rate.pde uncrustify ArduPlane/climb_rate.pde 2012-08-21 18:57:21 -07:00
command_description.txt Cleanup: rename files with spaces in their names, replace with underscores 2012-02-28 16:14:31 -08:00
commands.pde Plane: prevent cross-track on some WP types 2014-08-04 21:02:13 +10:00
commands_logic.pde Plane: fixed missing break statement 2014-11-25 13:15:25 +11:00
commands_process.pde Plane: RTL home when AUTO run with no mission 2014-03-19 12:12:31 +09:00
compat.h Plane: fix for HAL_GPIO_* 2014-06-02 10:42:36 +10:00
compat.pde Plane: removed unused function 2014-10-30 18:23:29 +11:00
config.h Plane: added OVERRIDE_CHAN parameter 2014-11-07 10:39:07 +11:00
control_modes.pde Plane: prevent baro reset from OVERRIDE_CHAN 2014-11-29 19:55:25 +11:00
createTags imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00
defines.h Plane: convert to using StorageManager 2014-08-13 18:46:44 +10:00
events.pde ArduPlane: attempt to send GCS a message when the GCS heartbeat is not detected. 2014-08-07 12:54:47 +10:00
failsafe.pde Plane: no need to set flaperons separately from flaperon_update() 2014-11-19 21:32:49 +11:00
geofence.pde Plane: update for APM_OBC API change 2014-08-17 09:13:29 +10:00
landing.pde Plane: fixed sense of landing sink rate calculation 2014-11-29 07:48:07 +11:00
navigation.pde Plane: split up altitude handling 2014-07-24 21:50:19 +10:00
nocore.inoflag ArduPlane: Ported to AP_HAL 2012-12-20 14:51:36 +11:00
px4_mixer.pde Plane: fixed potential division by zero in mixing creation 2014-11-08 15:40:35 +11:00
radio.pde Plane: setup pwm esc scaling 2014-11-26 11:14:44 +11:00
release-notes.txt Plane: prepare for 3.2.0 release 2014-11-25 13:58:28 +11:00
sensors.pde Plane: changed for new AP_Airspeed API 2014-11-13 21:12:59 +11:00
setup.pde Plane: fixed CLI build again 2014-11-11 21:54:25 +11:00
system.pde Plane: fix build with new mavlink repo 2014-11-18 11:20:08 +11:00
takeoff.pde Plane: added FBWA_TDRAG_CHAN parameter 2014-08-24 19:39:51 +10:00
test.pde Plane: fixed baro test in CLI 2014-11-19 21:42:27 +11:00