Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-03 06:28:27 -04:00
Code Issues Packages Projects Releases Wiki Activity
ec52df991c
ardupilot/ArduPlane
History
Caio Marcelo de Oliveira Filho ec52df991c build: compile only the HAL files needed by the board 
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
2015-10-21 09:16:07 +11:00
..
altitude.cpp Plane: add some safety to detect bad lidar readings 2015-09-16 14:24:44 +10:00
APM_Config.h Plane: added HIL_MODE parameter 2015-03-13 22:52:56 +11:00
APM_Config.h.reference Plane: cleanup HIL defines 2014-02-15 05:29:46 +11:00
ArduPlane.cpp Plane: added RPM logging 2015-09-24 20:58:18 +10:00
arming_checks.cpp Plane: add ahrs health pre-arm check 2015-10-16 13:50:59 +09:00
Attitude.cpp Plane: allow for higher roll limits on takeoff 2015-09-17 15:35:37 +10:00
capabilities.cpp Plane: init vehicle capabilities 2015-08-05 16:08:49 +09:00
commands_logic.cpp Plane: send home position when home is set or get-home msg received 2015-10-03 12:56:27 +09:00
commands_process.cpp Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00
commands.cpp Plane: send home position when home is set or get-home msg received 2015-10-03 12:56:27 +09:00
config.h Plane: re-enable geofencing on APM2 2015-07-30 11:04:31 +10:00
control_modes.cpp Plane: update severities 2015-08-28 10:04:35 +10:00
createTags imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00
defines.h Plane: reworked is_flying 2015-08-23 10:34:18 +10:00
events.cpp Plane: update severities 2015-08-28 10:04:35 +10:00
failsafe.cpp Plane: require 5 channels to run failsafe passthrough 2015-09-07 09:16:14 +10:00
GCS_Mavlink.cpp Plane: add no break comment to suppress compiler warning 2015-10-03 12:56:30 +09:00
geofence.cpp Plane: update severities 2015-08-28 10:04:35 +10:00
is_flying.cpp Plane: added time for flying in any mode 2015-09-09 09:14:59 +10:00
landing.cpp Plane: add some safety to detect bad lidar readings 2015-09-16 14:24:44 +10:00
Log.cpp Plane: log flight_stage 2015-09-28 18:18:09 +10:00
make.inc build: compile only the HAL files needed by the board 2015-10-21 09:16:07 +11:00
Makefile Plane: cleanup cruft in Makefile 2013-10-13 21:41:01 +11:00
navigation.cpp Plane: added local millis() and micros() to reduce code size a bit 2015-05-21 07:48:53 +10:00
nocore.inoflag ArduPlane: Ported to AP_HAL 2012-12-20 14:51:36 +11:00
Parameters.cpp Plane: added RPM logging 2015-09-24 20:58:18 +10:00
Parameters.h Plane: added RPM logging 2015-09-24 20:58:18 +10:00
Parameters.pde Plane: added blank Parameters.pde for MissionPlanner 2015-05-30 15:21:33 +09:00
Plane.cpp AP_HAL: make code not depend on concrete HAL implementations 2015-10-21 09:16:07 +11:00
Plane.h Plane: add ahrs health pre-arm check 2015-10-16 13:50:59 +09:00
px4_mixer.cpp Plane: ensure throttle reverse is obeyed in all states 2015-09-14 09:42:20 +10:00
radio.cpp Plane: ensure throttle reverse is obeyed in all states 2015-09-14 09:42:20 +10:00
release-notes.txt Plane: prepare for 3.4.0 release 2015-09-24 10:08:27 +10:00
sensors.cpp Plane: added RPM logging 2015-09-24 20:58:18 +10:00
setup.cpp Plane: convert from .pde to .cpp files 2015-05-21 07:48:52 +10:00
system.cpp Plane: added RPM logging 2015-09-24 20:58:18 +10:00
takeoff.cpp Plane: allow for higher roll limits on takeoff 2015-09-17 15:35:37 +10:00
test.cpp ArduPlane: use compass get_{field,offsets}() functions 2015-10-15 19:56:06 +09:00