.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: EPM enable/disable to APM_Config.h
|
2013-12-17 15:36:44 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
|
2013-11-26 13:05:32 +11:00 |
AP_State.pde
|
Copter: ARMING_CHECK made into bitmask
|
2013-11-15 17:13:56 +09:00 |
ArduCopter.pde
|
Copter: bugfix for starting in LOITER
|
2013-12-30 17:18:10 +09:00 |
Attitude.pde
|
Copter: rename nav_yaw to control_yaw
|
2013-11-27 22:48:20 +09:00 |
GCS_Mavlink.pde
|
Copter: use common available_memory()
|
2013-12-28 16:02:32 +11:00 |
Log.pde
|
Copter: use common available_memory()
|
2013-12-28 16:02:32 +11:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: Add RSSI_RANGE parameter
|
2013-12-17 22:38:39 +09:00 |
Parameters.pde
|
Copter: Add RSSI_RANGE parameter
|
2013-12-17 22:38:39 +09:00 |
ReleaseNotes.txt
|
Copter: 3.1 release notes
|
2013-12-14 17:08:38 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
auto_tune.pde
|
Copter: reduce autotune min rate D to 0.002
|
2013-12-09 14:17:31 +09:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
Copter: remove old comments
|
2013-09-24 21:45:43 +09:00 |
commands_logic.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
commands_process.pde
|
Copter: reject change_command if not in AUTO
|
2013-11-14 13:49:37 +09:00 |
compat.h
|
Copter LEDs: replace bitRead with bitmask
|
2013-04-01 13:10:12 +09:00 |
compat.pde
|
Copter: make compat functions static
|
2013-09-23 18:10:22 +10:00 |
config.h
|
Copter: integrate EPM library
|
2013-12-17 15:36:42 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_modes.pde
|
Copter: integrate EPM library
|
2013-12-17 15:36:42 +09:00 |
crash_check.pde
|
Copter: add alt and throttle checks to crash detector
|
2013-10-30 13:33:09 +09:00 |
defines.h
|
Copter: integrate EPM library
|
2013-12-17 15:36:42 +09:00 |
drift.pde
|
Copter: Drift updates control_roll, pitch
|
2013-11-30 18:06:56 +09:00 |
events.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: GPS ok only when not glitching
|
2013-11-11 22:24:18 +09:00 |
flip.pde
|
TradHeli: add THROTTLE_MANUAL_HELI
|
2013-11-15 22:57:53 +09:00 |
heli.pde
|
TradHeli: dynamic flight speed minimum to 5m/s
|
2013-11-16 16:58:14 +09:00 |
inertia.pde
|
Copter: cleanup some bit if tests to be clearer
|
2013-04-23 23:03:34 +10:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motors.pde
|
Copter: Split out prearm failures of low HDOP separately from !gps lock
|
2013-12-26 10:10:06 +09:00 |
navigation.pde
|
Copter: combine nav_roll and control_roll
|
2013-11-27 23:11:30 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
ArduCopter: performance monitoring - changed loop counters to uint16_t.
|
2012-11-19 11:55:47 +09:00 |
position_vector.pde
|
Copter/position_vector: remove const specifiers on objects returned by
|
2013-10-27 13:41:46 +09:00 |
radio.pde
|
TradHeli: set throttle_min to zero by default
|
2013-11-15 22:58:38 +09:00 |
read_me.text
|
renamed top level directories
|
2011-09-09 11:27:41 +10:00 |
sensors.pde
|
Copter: Add RSSI_RANGE parameter
|
2013-12-17 22:38:39 +09:00 |
setup.pde
|
Copter: replace APM with board in cli
|
2013-12-28 10:42:10 +09:00 |
system.pde
|
Copter: use common available_memory()
|
2013-12-28 16:02:32 +11:00 |
test.pde
|
Copter: changes for compass healthy API
|
2013-12-09 17:47:22 +11:00 |