.. |
APM_Config.h
|
Plane : Add data logging for optical flow use with EKF
|
2014-12-06 18:16:48 +11:00 |
APM_Config.h.reference
|
Plane: cleanup HIL defines
|
2014-02-15 05:29:46 +11:00 |
ArduPlane.pde
|
Plane: changed version number to 3.2.1alpha1
|
2014-12-06 18:37:39 +11:00 |
Attitude.pde
|
Plane: use set_radio_trimmed() for flaperons
|
2014-11-25 08:20:10 +11:00 |
GCS_Mavlink.pde
|
Plane: remove fwd of unknown msg types
|
2014-12-11 12:32:52 +09:00 |
Log.pde
|
Plane : Add data logging for optical flow use with EKF
|
2014-12-06 18:16:48 +11:00 |
Makefile
|
Plane: cleanup cruft in Makefile
|
2013-10-13 21:41:01 +11:00 |
Parameters.h
|
Plane : Add data logging for optical flow use with EKF
|
2014-12-06 18:16:48 +11:00 |
Parameters.pde
|
Plane : Add data logging for optical flow use with EKF
|
2014-12-06 18:16:48 +11:00 |
altitude.pde
|
Plane: lowpass the rangefinder correction, not height
|
2014-08-27 18:25:17 +10:00 |
climb_rate.pde
|
uncrustify ArduPlane/climb_rate.pde
|
2012-08-21 18:57:21 -07:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
Plane: prevent cross-track on some WP types
|
2014-08-04 21:02:13 +10:00 |
commands_logic.pde
|
Plane: prevent a change altitude command from causing a sudden descent
|
2014-12-03 18:31:23 +11:00 |
commands_process.pde
|
Plane: RTL home when AUTO run with no mission
|
2014-03-19 12:12:31 +09:00 |
compat.h
|
Plane: fix for HAL_GPIO_*
|
2014-06-02 10:42:36 +10:00 |
compat.pde
|
Plane: removed unused function
|
2014-10-30 18:23:29 +11:00 |
config.h
|
Plane : Only build optical flow with PX4 board
|
2014-12-06 18:16:48 +11:00 |
control_modes.pde
|
Plane: prevent baro reset from OVERRIDE_CHAN
|
2014-11-29 19:55:25 +11:00 |
createTags
|
imported ArduPlane from ArduPilotMega svn
|
2011-09-09 11:29:39 +10:00 |
defines.h
|
Plane : Add data logging for optical flow use with EKF
|
2014-12-06 18:16:48 +11:00 |
events.pde
|
ArduPlane: attempt to send GCS a message when the GCS heartbeat is not detected.
|
2014-08-07 12:54:47 +10:00 |
failsafe.pde
|
Plane: no need to set flaperons separately from flaperon_update()
|
2014-11-19 21:32:49 +11:00 |
geofence.pde
|
Plane: update for APM_OBC API change
|
2014-08-17 09:13:29 +10:00 |
landing.pde
|
Plane: fixed sense of landing sink rate calculation
|
2014-11-29 07:48:07 +11:00 |
navigation.pde
|
Plane: split up altitude handling
|
2014-07-24 21:50:19 +10:00 |
nocore.inoflag
|
ArduPlane: Ported to AP_HAL
|
2012-12-20 14:51:36 +11:00 |
px4_mixer.pde
|
Plane: fixed potential division by zero in mixing creation
|
2014-11-08 15:40:35 +11:00 |
radio.pde
|
Plane: setup pwm esc scaling
|
2014-11-26 11:14:44 +11:00 |
release-notes.txt
|
Plane: prepare for 3.2.0 release
|
2014-11-25 13:58:28 +11:00 |
sensors.pde
|
Plane: changed for new AP_Airspeed API
|
2014-11-13 21:12:59 +11:00 |
setup.pde
|
Plane: fixed CLI build again
|
2014-11-11 21:54:25 +11:00 |
system.pde
|
Plane : Only build optical flow with PX4 board
|
2014-12-06 18:16:48 +11:00 |
takeoff.pde
|
Plane: added FBWA_TDRAG_CHAN parameter
|
2014-08-24 19:39:51 +10:00 |
test.pde
|
Plane: fixed baro test in CLI
|
2014-11-19 21:42:27 +11:00 |