mirror of https://github.com/ArduPilot/ardupilot
102 lines
3.5 KiB
C++
102 lines
3.5 KiB
C++
#ifndef __AP_HAL_LINUX_GPIO_RPI_H__
|
|
#define __AP_HAL_LINUX_GPIO_RPI_H__
|
|
|
|
#include <stdint.h>
|
|
#include "AP_HAL_Linux.h"
|
|
|
|
#define LOW 0
|
|
#define HIGH 1
|
|
|
|
// Raspberry Pi GPIO memory
|
|
#define BCM2708_PERI_BASE 0x20000000
|
|
#define BCM2709_PERI_BASE 0x3F000000
|
|
#define GPIO_BASE(address) (address + 0x200000)
|
|
#define PWM_BASE(address) (address + 0x20C000) /* PWM controller */
|
|
#define CLOCK_BASE(address) (address + 0x101000)
|
|
|
|
#define PWM_CTL 0
|
|
#define PWM_RNG1 4
|
|
#define PWM_DAT1 5
|
|
|
|
#define PWMCLK_CNTL 40
|
|
#define PWMCLK_DIV 41
|
|
|
|
#define PAGE_SIZE (4*1024)
|
|
#define BLOCK_SIZE (4*1024)
|
|
|
|
// GPIO setup. Always use INP_GPIO(x) before OUT_GPIO(x) or SET_GPIO_ALT(x,y)
|
|
#define GPIO_MODE_IN(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3))
|
|
#define GPIO_MODE_OUT(g) *(gpio+((g)/10)) |= (1<<(((g)%10)*3))
|
|
#define GPIO_MODE_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3))
|
|
#define GPIO_SET_HIGH *(gpio+7) // sets bits which are 1
|
|
#define GPIO_SET_LOW *(gpio+10) // clears bits which are 1
|
|
#define GPIO_GET(g) (*(gpio+13)&(1<<g)) // 0 if LOW, (1<<g) if HIGH
|
|
|
|
// Raspberry Pi GPIO mapping
|
|
#define RPI_GPIO_2 2 // Pin 3 SDA
|
|
#define RPI_GPIO_3 3 // Pin 5 SCL
|
|
#define RPI_GPIO_4 4 // Pin 7
|
|
#define RPI_GPIO_5 5 // Pin 29
|
|
#define RPI_GPIO_6 6 // Pin 31
|
|
#define RPI_GPIO_7 7 // Pin 26 CE1 MPU9250_CS
|
|
#define RPI_GPIO_8 8 // Pin 24 CE0 UBLOX_CS
|
|
#define RPI_GPIO_9 9 // Pin 21 MISO
|
|
#define RPI_GPIO_10 10 // Pin 19 MOSI
|
|
#define RPI_GPIO_11 11 // Pin 23 SCLK
|
|
#define RPI_GPIO_12 12 // Pin 32
|
|
#define RPI_GPIO_13 13 // Pin 33
|
|
#define RPI_GPIO_14 14 // Pin 8 TxD
|
|
#define RPI_GPIO_15 15 // Pin 10 RxD
|
|
#define RPI_GPIO_16 16 // Pin 36
|
|
#define RPI_GPIO_17 17 // Pin 11 UART_PORT_5
|
|
#define RPI_GPIO_18 18 // Pin 12 UART_PORT_4
|
|
#define RPI_GPIO_19 19 // Pin 35
|
|
#define RPI_GPIO_20 20 // Pin 38
|
|
#define RPI_GPIO_21 21 // Pin 40
|
|
#define RPI_GPIO_22 22 // Pin 15 UBLOX_PPS
|
|
#define RPI_GPIO_23 23 // Pin 16 MPU9250_DRDY
|
|
#define RPI_GPIO_24 24 // Pin 18 SPI_PORT_6
|
|
#define RPI_GPIO_25 25 // Pin 22 SPI_PORT_5
|
|
#define RPI_GPIO_26 26 // Pin 37
|
|
#define RPI_GPIO_27 27 // Pin 13
|
|
#define RPI_GPIO_28 28 // Pin 3
|
|
#define RPI_GPIO_29 29 // Pin 4
|
|
#define RPI_GPIO_30 30 // Pin 5
|
|
#define RPI_GPIO_31 31 // Pin 6
|
|
|
|
class Linux::GPIO_RPI : public AP_HAL::GPIO {
|
|
private:
|
|
int mem_fd;
|
|
void *gpio_map;
|
|
void *pwm_map;
|
|
void *clk_map;
|
|
volatile uint32_t *gpio;
|
|
volatile uint32_t *pwm;
|
|
volatile uint32_t *clk;
|
|
void setPWM0Period(uint32_t time_us);
|
|
void setPWM0Duty(uint8_t percent);
|
|
|
|
public:
|
|
GPIO_RPI();
|
|
void init();
|
|
void pinMode(uint8_t pin, uint8_t output);
|
|
void pinMode(uint8_t pin, uint8_t output, uint8_t alt);
|
|
int8_t analogPinToDigitalPin(uint8_t pin);
|
|
uint8_t read(uint8_t pin);
|
|
void write(uint8_t pin, uint8_t value);
|
|
void toggle(uint8_t pin);
|
|
void setPWMPeriod(uint8_t pin, uint32_t time_us);
|
|
void setPWMDuty(uint8_t pin, uint8_t percent);
|
|
|
|
/* Alternative interface: */
|
|
AP_HAL::DigitalSource* channel(uint16_t n);
|
|
|
|
/* Interrupt interface: */
|
|
bool attach_interrupt(uint8_t interrupt_num, AP_HAL::Proc p,
|
|
uint8_t mode);
|
|
|
|
/* return true if USB cable is connected */
|
|
bool usb_connected(void);
|
|
};
|
|
|
|
#endif // __AP_HAL_LINUX_GPIO_RPI_H__
|