ardupilot/libraries/AP_DDS
Ryan Friedman 0905ffa438 AP_DDS: Add initial DDS Client support
* Use clang to verify no unused files
* Add a topic table to prepare for code generating interfaces
* Generated IDL's to to a generated directory in build
* Use black to format python files
* Populate a ROS time maessage with Linux epoch time for ROS time
* Add workarounds for PoseStamped and TwistStamped with manual mods to IDL

Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
Co-authored-by: Rhys Mainwaring <rhys.mainwaring@me.com>
Co-authored-by: Arsh Pratap <arshpratapofficial@gmail.com>
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
Co-authored-by: Russ Webber <russ@rw.id.au>
Co-authored-by: Peter Barker <pb-gh@barker.dropbear.id.au>
2023-03-22 09:22:36 +11:00
..
Idl
AP_DDS_Client.cpp
AP_DDS_Client.h
AP_DDS_Generic_Fn_T.h
AP_DDS_Topic_Table.h
README.md
dds_xrce_profile.xml
gen_config_h.py
wscript

README.md

Testing with DDS/micro-Ros

Architecture

Ardupilot contains the DDS Client library, which can run as SITL. Then, the DDS application runs a ROS2 node, an EProsima Integration Service, and the MicroXRCE Agent. The two systems communicate over serial, which is the only supported protocol in Ardupilot MicroXCE DDS at this time.

---
title: Hardware Serial Port Loopback
---
graph LR

  subgraph Linux Computer

    subgraph Ardupilot SITL
      veh[sim_vehicle.py] <--> xrceClient[EProsima Micro XRCE DDS Client]
      xrceClient <--> port1[devUSB1]
    end

    subgraph DDS Application
      ros[ROS2 Node] <--> agent[Micro ROS Agent]
      agent <--> port2[devUSB2]
    end

    port1 <--> port2

  end

Currently, serial is the only supported transport, but there are plans to add IP-based transport over ethernet.

Installing Build Dependencies

While DDS support in Ardupilot is mostly through git submodules, another tool needs to be available on your system: Micro XRCE DDS Gen.

  1. Go to a directory on your system to clone the repo (perhaps next to ardupilot)
  2. Install java
sudo apt install java
  1. Follow instructions here to install the generator, but use develop branch instead of master (for now).
git clone -b develop --recurse-submodules https://github.com/eProsima/Micro-XRCE-DDS-Gen.git
cd Micro-XRCE-DDS-Gen
./gradlew assemble
  1. Add the generator directory to $PATH, like so.
  2. Test it
cd /path/to/ardupilot
microxrceddsgen -version
# openjdk version "11.0.18" 2023-01-17
# OpenJDK Runtime Environment (build 11.0.18+10-post-Ubuntu-0ubuntu122.04)
# OpenJDK 64-Bit Server VM (build 11.0.18+10-post-Ubuntu-0ubuntu122.04, mixed mode, sharing)
# microxrceddsgen version: 1.0.0beta2

⚠️ If you have installed FastDDS or FastDDSGen globally on your system: eProsima's libraries and the packaging system in Ardupilot are not determistic in this scenario. You may experience the wrong version of a library brought in, or runtime segfaults. For now, avoid having simultaneous local and global installs. If you followed the global install section, you should remove it and switch to local install.

Parameters for DDS

Name Description
SERIAL1_BAUD The serial baud rate for DDS
SERIAL1_PROTOCOL Set this to 45 to use DDS on the serial port

Testing with a UART

On Linux, first create a virtual serial port for use with SITL like this

sudo apt-get update
sudo apt-get install socat

Then, start a virtual serial port with socat. Take note of the two /dev/pts/* ports. If yours are different, substitute as needed.

socat -d -d pty,raw,echo=0 pty,raw,echo=0
>>> 2023/02/21 05:26:06 socat[334] N PTY is /dev/pts/1
>>> 2023/02/21 05:26:06 socat[334] N PTY is /dev/pts/2
>>> 2023/02/21 05:26:06 socat[334] N starting data transfer loop with FDs [5,5] and [7,7]

Set up your SITL. Run the simulator with the following command (assuming we are using /dev/pts/1 for Ardupilot SITL). Take note how two parameters need adjusting from default to use DDS.

# Wipe params till you see "AP: ArduPilot Ready"
# Select your favorite vehicle type
sim_vehicle.py -w -v ArduPlane

# Set params
param set SERIAL1_BAUD 115
# See libraries/AP_SerialManager/AP_SerialManager.h AP_SerialManager SerialProtocol_DDS_XRCE
param set SERIAL1_PROTOCOL 45

Start the sim now with the new params

sim_vehicle.py -v ArduPlane -D --console --enable-dds -A "--uartC=uart:/dev/pts/1"

Starting with microROS Agent

Follow the steps to use the microROS Agent

Until this PR is merged, ignore the notes about foxy. It works on humble.

Follow the instructions for the following:

  • Do "Installing ROS 2 and the micro-ROS build system"
    • Skip the docker run command, build it locally instead
  • Skip "Creating a new firmware workspace"
  • Skip "Building the firmware"
  • Do "Creating the micro-ROS agent"
  • Source your ROS workspace
  • Run microROS agent with the following command
cd ardupilot/libraries/AP_DDS
ros2 run micro_ros_agent micro_ros_agent serial -b 115200 -D /dev/pts/2  -r dds_xrce_profile.xml # (assuming we are using tty/pts/2 for Ardupilot)

Tutorial

Using the ROS2 CLI to Read Ardupilot Data

If you have installed the microROS agent and ROS-2 Humble

  • Source the ros2 installation

    • source /opt/ros/humble/setup.bash
  • If SITL is running alongise MicroROS Agent, you should be able to see the agent here and view the data output.

$ ros2 node list
/Ardupilot_DDS_XRCE_Client

$ ros2 topic list  -v
Published topics:
 * /ROS2_Time [builtin_interfaces/msg/Time] 1 publisher
 * /parameter_events [rcl_interfaces/msg/ParameterEvent] 1 publisher
 * /rosout [rcl_interfaces/msg/Log] 1 publisher

Subscribed topics:

$ ros2 topic hz /ROS2_Time
average rate: 50.115
        min: 0.012s max: 0.024s std dev: 0.00328s window: 52

$ ros2 topic echo /ROS2_Time 
sec: 1678668735
nanosec: 729410000
---

Adding DDS messages to Ardupilot

Unlike the use of ROS 2 .msg files, since Ardupilot supports native DDS, the message files follow OMG IDL DDS v4.2. This package is intended to work with any .idl file complying with those extensions, with some limitations.

  1. IDL files need to be in the same folder, and modified includes.
  2. Topic types can't use alias types.
  3. Arrays need manually edited type names.

Over time, these restrictions will ideally go away.

To get a new IDL file from ROS2, follow this process:

cd ardupilot
source /opt/ros/humble/setup.bash
# Find the IDL file
find /opt/ros/$ROS_DISTRO -type f -wholename \*builtin_interfaces/msg/Time.idl
# Create the directory in the source tree if it doesn't exist
mkdir -p libraries/AP_DDS_Client/Idl/builtin_interfaces/msg/
# Copy the IDL
cp -r /opt/ros/humble/share/builtin_interfaces/msg/Time.idl libraries/AP_DDS_Client/Idl/builtin_interfaces/msg/
# Now, apply the mods manually to be compliant with MicroXRCEDDSGen limitations
# Create an output directory to test it
mkdir -p /tmp/xrce_out
# Run the generator
microxrceddsgen -replace -d /tmp/xrce_out libraries/AP_DDS_Client/Idl/builtin_interfaces/msg/Time.idl
# cat /tmp/xrce_out/