ardupilot/libraries/AP_HAL_ChibiOS/hwdef/CarbonixL496/hwdef-bl.dat

75 lines
1.3 KiB
Plaintext

# hw definition file for processing by chibios_pins.py
# MCU class and specific type
MCU STM32L496 STM32L496xx
FLASH_RESERVE_START_KB 0
FLASH_BOOTLOADER_LOAD_KB 36
# reserve some space for params
APP_START_OFFSET_KB 4
# board ID for firmware load
APJ_BOARD_ID 1053
# setup build for a peripheral firmware
env AP_PERIPH 1
# crystal frequency
OSCILLATOR_HZ 12000000
# assume 256k flash part
FLASH_SIZE_KB 256
STDOUT_SERIAL SD2
STDOUT_BAUDRATE 57600
# order of UARTs
SERIAL_ORDER OTG1 USART2
# a fault LED
PA13 LED_BOOTLOADER OUTPUT HIGH # blue
define HAL_LED_ON 0
# USART1
PA2 USART2_TX USART2 SPEED_HIGH NODMA
PA3 USART2_RX USART2 SPEED_HIGH NODMA
# USB
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
define HAL_USE_SERIAL TRUE
define STM32_SERIAL_USE_USART2 TRUE
define HAL_NO_GPIO_IRQ
define SERIAL_BUFFERS_SIZE 32
define HAL_USE_EMPTY_IO TRUE
define PORT_INT_REQUIRED_STACK 64
define DMA_RESERVE_SIZE 0
MAIN_STACK 0x800
PROCESS_STACK 0x800
define HAL_DISABLE_LOOP_DELAY
# enable CAN support
PB8 CAN1_RX CAN1
PB9 CAN1_TX CAN1
# debugger support, disabled as PA13 used for LED
# PA13 JTMS-SWDIO SWD
# PA14 JTCK-SWCLK SWD
# make bl baudrate match debug baudrate for easier debugging
define BOOTLOADER_BAUDRATE 57600
# use a small bootloader timeout
define HAL_BOOTLOADER_TIMEOUT 1000
define CAN_APP_NODE_NAME "org.ardupilot.CarbonixL496"