ardupilot/libraries/AP_HAL_ChibiOS
Andy Piper c057cc5485 AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu
add support for undef of STM32 lines and DMA_NOMAP
add support for F103 running at 24Mhz
add f103 variants of iofirmware
reduce memory usage in iomcu for new model
correct pwm output reporting
split iofirmware into config + mcu to allow f103 definition
don't enable non-existant timers on F103
2023-08-15 06:53:48 +10:00
..
hwdef AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu 2023-08-15 06:53:48 +10:00
AP_HAL_ChibiOS.h
AP_HAL_ChibiOS_Namespace.h AP_HAL_ChibiOS: rename QSPIDevice to WSPIDevice 2023-04-28 08:31:15 +10:00
AP_HAL_ChibiOS_Private.h AP_HAL_ChibiOS: rename QSPIDevice to WSPIDevice 2023-04-28 08:31:15 +10:00
AnalogIn.cpp HAL_ChibiOS: fixed asserts in AnalogIn driver 2023-05-06 07:24:58 +10:00
AnalogIn.h HAL_ChibiOS: fixed asserts in AnalogIn driver 2023-05-06 07:24:58 +10:00
CANFDIface.cpp HAL_ChibiOS: disable CANFD bits if CANFD not enabled 2023-07-12 18:54:45 +10:00
CANFDIface.h
CANIface.h
CanIface.cpp HAL_ChibiOS: don't consider a MAVCAN send failure as a send failure 2023-06-08 10:15:50 +10:00
DSP.cpp
DSP.h
Device.cpp
Device.h
EventSource.cpp AP_HAL_ChibiOS: change to 16 bit timeout in event interface 2023-04-19 17:26:57 +10:00
EventSource.h AP_HAL_ChibiOS: change to 16 bit timeout in event interface 2023-04-19 17:26:57 +10:00
Flash.h
GPIO.cpp HAL_ChibiOS: port for STM32L4+ processor 2023-04-14 07:48:56 +10:00
GPIO.h HAL_ChibiOS: port for STM32L4+ processor 2023-04-14 07:48:56 +10:00
HAL_ChibiOS_Class.cpp HAL_ChibiOS: revert recent USB changes 2023-06-03 16:50:30 +10:00
HAL_ChibiOS_Class.h
I2CDevice.cpp HAL_ChibiOS: port for STM32L4+ processor 2023-04-14 07:48:56 +10:00
I2CDevice.h
LogStructure.h
RCInput.cpp AP_HAL_ChibiOS: add and use AP_RCPROTOCOL_ENABLED 2023-05-16 09:16:37 +10:00
RCInput.h
RCOutput.cpp AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu 2023-08-15 06:53:48 +10:00
RCOutput.h AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu 2023-08-15 06:53:48 +10:00
RCOutput_bdshot.cpp AP_HAL_ChibiOS: use unsigned math as appropriate 2023-06-27 09:28:33 +10:00
RCOutput_serial.cpp AP_HAL_ChibiOS: fix sending of dshot commands to all channels 2023-08-15 06:53:48 +10:00
SPIDevice.cpp AP_HAL_ChibiOS: revert to ChibiOS SPI driver model v1 2023-03-31 05:40:20 +11:00
SPIDevice.h
Scheduler.cpp HAL_ChibiOS: support recovery from a mutex deadlock 2023-06-27 10:11:46 +10:00
Scheduler.h HAL_ChibiOS: support recovery from a mutex deadlock 2023-06-27 10:11:46 +10:00
Semaphores.cpp
Semaphores.h
SoftSigReader.cpp
SoftSigReader.h
SoftSigReaderInt.cpp
SoftSigReaderInt.h
Storage.cpp
Storage.h
UARTDriver.cpp HAL_ChibiOS: added a method for just changing port owner 2023-08-02 17:44:39 +10:00
UARTDriver.h HAL_ChibiOS: moved uart locking up to AP_HAL 2023-07-12 17:06:02 +10:00
Util.cpp AP_HAL_ChibiOS: add support for DShot on IOMCU 2023-08-15 06:53:48 +10:00
Util.h AP_HAL_ChibiOS: add support for get_persistent_param_by_name 2023-06-17 14:49:22 +10:00
WSPIDevice.cpp AP_HAL_ChibiOS: correct OSPI clock in WSPIDevice 2023-04-28 08:31:15 +10:00
WSPIDevice.h AP_HAL_ChibiOS: support is_busy() on WSPI device 2023-04-28 08:31:15 +10:00
bxcan.hpp
sdcard.cpp HAL_ChibiOS: revert recent USB changes 2023-06-03 16:50:30 +10:00
sdcard.h
shared_dma.cpp
shared_dma.h
stdio.cpp
system.cpp AP_HAL_ChibiOS: allow HW without HW_RNG to SW-based create psuedo-random 2023-08-06 09:20:08 +10:00