Andy Piper
c057cc5485
AP_HAL_ChibiOS: add get_output_mode() and use it to print correct banner for iomcu
...
add support for undef of STM32 lines and DMA_NOMAP
add support for F103 running at 24Mhz
add f103 variants of iofirmware
reduce memory usage in iomcu for new model
correct pwm output reporting
split iofirmware into config + mcu to allow f103 definition
don't enable non-existant timers on F103
2023-08-15 06:53:48 +10:00
Andy Piper
83fddd0d61
AP_HAL_ChibiOS: enable iomcu-dshot on CubeBlack
2023-08-15 06:53:48 +10:00
Andy Piper
10a612566a
AP_HAL_ChibiOS: ensure shared DMA works in IOMCU
...
enable TIM4 in shared mode on IOMCU for dshot
stop the PWM peripheral in rcout DMA swapping on IOMCU to prevent UART corruption
provide debugging options on iomcu dshot
support unshared DMA with iomcu dshot
optimize rcout on iomcu
tune iomcu stack for 8 channels
2023-08-15 06:53:48 +10:00
Andy Piper
3c42f1b7d9
AP_HAL_ChibiOS: disable stack checking on iomcu
2023-08-15 06:53:48 +10:00
Andy Piper
837c81af5e
AP_HAL_ChibiOS: fix sending of dshot commands to all channels
2023-08-15 06:53:48 +10:00
bugobliterator
9a21297cd1
AP_HAL_ChibiOS: add support for DShot on IOMCU
...
set timer counter size to be a byte wide
use HAL_DSHOT_ENABLED instead of DISABLE_DSHOT
build iomcu-dshot from existing iomcu
correct defines for DMAR size on iomcu
allow iomcu dshot rate to be configured from FMU
correct DMA allocation for dshot on iomcu
allow debug builds on iofirmware
ensure dshot is enabled on iomcu dshot
support proper iomcu dshot output thread triggered by FMU
allow selective disablement of serial LEDs and passthrough
disable serial LEDs and passthrough on iomcu-dshot
propagate ESC telemetry to iomcu
dshot_send_groups() for iomcu
remove use of ICU on iomcu for dshot. only allocate possible DMA channels
rename serial passthrough and dshot defines
update dshot docs
resize dshot iomcu main stack to minimum
correct dshot prescaler usage and bit_width_mul calculation
use ChibiOS in tickless mode on iomcu-dshot so that virtual timers can be used
propagate dshot commands to iomcu
passthrough oneshot125 to iomcu
2023-08-15 06:53:48 +10:00
Andy Piper
f233a65580
AP_HAL_ChibiOS: add global interrupt handlers for TIM15 and TIM17 on F1
2023-08-15 06:53:48 +10:00
alexklimaj
738a4c638a
hwdef: arkv6x default to no IO MCU
2023-08-14 12:06:25 +10:00
Andy Piper
205e6bebc7
AP_HAL_ChibiOS: fix incorrect removal of HAL_I2C_INTERNAL_MASK undef in SkystarsH743HD
2023-08-12 14:00:11 +10:00
Tom Pittenger
2b30fbcfb2
AP_HAL_ChibiOS: disable RPM by default on Periph
2023-08-11 13:31:45 -07:00
Peter Barker
e638925ee0
AP_HAL_ChibiOS: chibios_hwdef.py: fix minor bugs
...
also mark as flake8-clean
2023-08-11 10:41:02 +10:00
Peter Barker
536f3ac922
chibios_hwdef.py: minor flake8 fixes
...
whitespace, long lines, ambiguous variables etc
2023-08-11 10:41:02 +10:00
Andy Piper
f787e940b3
AP_HAL_ChibiOS: change incorrect I2C internal mask from SkystarsH7HD bdshot
2023-08-10 16:16:16 +10:00
Andy Piper
9212a24248
AP_HAL_ChibiOS: properly support CRSF on HEEWING-F405
...
update HeeWing F405 README to reflect VTX pinout
2023-08-09 17:44:14 +10:00
Peter Barker
ceab0180ec
AP_HAL_ChibiOS: remove use of HAL_BUILD_AP_PERIPH
...
turn torqeedo off in chibios_hwdef.py instead for Periph
2023-08-09 17:39:49 +10:00
Peter Barker
68e3b1e79b
AP_HAL_ChibiOS: move rangefinder rotation default down into AP_Periph
2023-08-09 17:39:49 +10:00
Peter Barker
67988320a7
hwdef: disable sending of RELAY_STATUS on mimimized boards
2023-08-09 07:44:07 +10:00
Andy Piper
fe56a6aedd
AP_HAL_ChibiOS: allow 8 bdshot channels on mRoControlZeroH7
2023-08-08 11:50:56 +10:00
Peter Barker
53d5d1b9a9
AP_HAL_ChibiOS: break out include files for firmware defaults
2023-08-08 11:45:50 +10:00
Peter Barker
009172685e
AP_HAL_ChibiOS: avoid use of MINIMIZE_FEATURES define in Copter directory
2023-08-08 10:35:19 +10:00
Peter Barker
646704c5dc
AP_HAL_ChibiOS: remove MINIMIZE_FEATURES define
2023-08-08 10:35:19 +10:00
Michael du Breuil
c1e6f130dd
AP_HAL_ChibiOS: CubeOrange map EXTERN_DRDY and !EXTERN_CS to ADC
2023-08-08 09:16:56 +10:00
Peter Barker
37de51f1d4
hwdef: remove un-needed lines in KakuteH7 config
...
these are the default values, and KakuteH7 isn't minimized
2023-08-06 17:36:25 -07:00
Andrew Tridgell
0333e92cbc
hwdef: update SIYI_N7 hwdef
...
the N7 isn't the same as the Durandal. It has 1 CAN bus, and 2 less
UARTs, and an extra compass. This fixes the hwdef.dat to match the
schematic
2023-08-06 09:23:45 +10:00
Tom Pittenger
8bddd4168b
AP_HAL_ChibiOS: update hwdefs for eth
2023-08-06 09:20:08 +10:00
Tom Pittenger
d59c3d7de0
AP_HAL_ChibiOS: remove common_eth.ld
2023-08-06 09:20:08 +10:00
Tom Pittenger
772465fef3
AP_HAL_ChibiOS: fix whitespace
2023-08-06 09:20:08 +10:00
bugobliterator
f84572a545
AP_HAL_ChibiOS: remove legacy define WATCHDOG_DISABLED
2023-08-06 09:20:08 +10:00
bugobliterator
cf6fd6717b
AP_HAL_ChibiOS: fix alignment for Ethernet safe memory
2023-08-06 09:20:08 +10:00
Tom Pittenger
9698291920
AP_HAL_ChibiOS: fix unused var compile error
2023-08-06 09:20:08 +10:00
bugobliterator
5c657cad9a
AP_HAL_ChibiOS: disable AP_Periph_Heavy for CubePilot-CANMod
2023-08-06 09:20:08 +10:00
bugobliterator
7bdee92d77
AP_HAL_ChibiOS: disable CAN2 on CubePilot-CANMod
2023-08-06 09:20:08 +10:00
bugobliterator
4e39318920
AP_HAL_ChibiOS: disable watchdog on CubePilot-CANMod
2023-08-06 09:20:08 +10:00
bugobliterator
50ae1ca7e8
AP_HAL_ChibiOS: update CubePilot-CANMod to support Networking
2023-08-06 09:20:08 +10:00
bugobliterator
e6b51df7cd
AP_HAL_ChibiOS: dynamically allocate memory for MAC Peripheral
2023-08-06 09:20:08 +10:00
Tom Pittenger
ec65b5175b
AP_HAL_ChibiOS: update Networking hwdef's param defaults
2023-08-06 09:20:08 +10:00
Tom Pittenger
291226eb5d
AP_HAL_ChibiOS: hwdef add support for Networking
2023-08-06 09:20:08 +10:00
Tom Pittenger
f66327d97d
AP_HAL_ChibiOS: Ethernet related memory allocations
2023-08-06 09:20:08 +10:00
Tom Pittenger
3b79ff0ad3
AP_HAL_ChibiOS: add hooks to compile Networking
2023-08-06 09:20:08 +10:00
Tom Pittenger
d841d250d8
AP_HAL_ChibiOS: allow HW without HW_RNG to SW-based create psuedo-random
2023-08-06 09:20:08 +10:00
Peter Barker
31281b5d11
AP_HAL_ChibiOS: eliminate use of MINIMIZE_FEATURES for Plane features
2023-08-02 17:48:25 +10:00
Andrew Tridgell
0ed33653fc
HAL_ChibiOS: added a method for just changing port owner
2023-08-02 17:44:39 +10:00
Andrew Tridgell
3cde2d964b
hwdef: enable custom LED reset code
2023-08-01 11:38:03 +10:00
Andrew Tridgell
865be0df64
hwdef: support for Here4 GPS
2023-08-01 11:38:03 +10:00
Peter Barker
ac9fd6fcb6
AP_HAL_ChibiOS: avoid use of MINIMIZE_FEATURES in AP_LandingGear_config.h
2023-08-01 10:44:59 +10:00
Martin Luessi
459ea697d9
AP_HAL_ChibiOS: RADIX2HD target change Serial4 default protocol to ESC telemetry
2023-08-01 10:40:53 +10:00
Peter Barker
3f791ed734
hwdef: exclude landing library from SkyViper build
2023-08-01 10:07:28 +10:00
Peter Barker
ab15485968
hwdef: only one GPS receiver on SkyViper
...
notably that means no blending
2023-08-01 10:03:19 +10:00
Andrew Tridgell
5908508811
hwdef: default most boards to MAVLink2 for 2nd USB endpoint
...
only CubeOrange and CubeBlack left as SLCAN
2023-07-31 19:03:13 +10:00
Andrew Tridgell
9d5560fc42
hwdef: default 2nd USB endpoint to MAVLink2
2023-07-31 19:03:13 +10:00