ardupilot/libraries/AP_Mount/AP_Mount_Backend.cpp

159 lines
6.8 KiB
C++

#include "AP_Mount_Backend.h"
extern const AP_HAL::HAL& hal;
// set_angle_targets - sets angle targets in degrees
void AP_Mount_Backend::set_angle_targets(float roll, float tilt, float pan)
{
// set angle targets
_angle_ef_target_rad.x = radians(roll);
_angle_ef_target_rad.y = radians(tilt);
_angle_ef_target_rad.z = radians(pan);
// set the mode to mavlink targeting
_frontend.set_mode(_instance, MAV_MOUNT_MODE_MAVLINK_TARGETING);
}
// set_roi_target - sets target location that mount should attempt to point towards
void AP_Mount_Backend::set_roi_target(const struct Location &target_loc)
{
// set the target gps location
_state._roi_target = target_loc;
// set the mode to GPS tracking mode
_frontend.set_mode(_instance, MAV_MOUNT_MODE_GPS_POINT);
}
// configure_msg - process MOUNT_CONFIGURE messages received from GCS. deprecated.
void AP_Mount_Backend::configure_msg(mavlink_message_t* msg)
{
__mavlink_mount_configure_t packet;
mavlink_msg_mount_configure_decode(msg, &packet);
set_mode((MAV_MOUNT_MODE)packet.mount_mode);
}
// control_msg - process MOUNT_CONTROL messages received from GCS. deprecated.
void AP_Mount_Backend::control_msg(mavlink_message_t *msg)
{
__mavlink_mount_control_t packet;
mavlink_msg_mount_control_decode(msg, &packet);
control((int32_t)packet.input_a, (int32_t)packet.input_b, (int32_t)packet.input_c, _state._mode);
}
void AP_Mount_Backend::control(int32_t pitch_or_lat, int32_t roll_or_lon, int32_t yaw_or_alt, MAV_MOUNT_MODE mount_mode)
{
_frontend.set_mode(_instance, mount_mode);
// interpret message fields based on mode
switch (_frontend.get_mode(_instance)) {
case MAV_MOUNT_MODE_RETRACT:
case MAV_MOUNT_MODE_NEUTRAL:
// do nothing with request if mount is retracted or in neutral position
break;
// set earth frame target angles from mavlink message
case MAV_MOUNT_MODE_MAVLINK_TARGETING:
set_angle_targets(roll_or_lon*0.01f, pitch_or_lat*0.01f, yaw_or_alt*0.01f);
break;
// Load neutral position and start RC Roll,Pitch,Yaw control with stabilization
case MAV_MOUNT_MODE_RC_TARGETING:
// do nothing if pilot is controlling the roll, pitch and yaw
break;
// set lat, lon, alt position targets from mavlink message
case MAV_MOUNT_MODE_GPS_POINT:
Location target_location;
memset(&target_location, 0, sizeof(target_location));
target_location.lat = pitch_or_lat;
target_location.lng = roll_or_lon;
target_location.alt = yaw_or_alt;
target_location.flags.relative_alt = true;
set_roi_target(target_location);
break;
default:
// do nothing
break;
}
}
// update_targets_from_rc - updates angle targets using input from receiver
void AP_Mount_Backend::update_targets_from_rc()
{
#define rc_ch(i) RC_Channels::rc_channel(i-1)
uint8_t roll_rc_in = _state._roll_rc_in;
uint8_t tilt_rc_in = _state._tilt_rc_in;
uint8_t pan_rc_in = _state._pan_rc_in;
// if joystick_speed is defined then pilot input defines a rate of change of the angle
if (_frontend._joystick_speed) {
// allow pilot speed position input to come directly from an RC_Channel
if (roll_rc_in && rc_ch(roll_rc_in)) {
_angle_ef_target_rad.x += rc_ch(roll_rc_in)->norm_input_dz() * 0.0001f * _frontend._joystick_speed;
_angle_ef_target_rad.x = constrain_float(_angle_ef_target_rad.x, radians(_state._roll_angle_min*0.01f), radians(_state._roll_angle_max*0.01f));
}
if (tilt_rc_in && (rc_ch(tilt_rc_in))) {
_angle_ef_target_rad.y += rc_ch(tilt_rc_in)->norm_input_dz() * 0.0001f * _frontend._joystick_speed;
_angle_ef_target_rad.y = constrain_float(_angle_ef_target_rad.y, radians(_state._tilt_angle_min*0.01f), radians(_state._tilt_angle_max*0.01f));
}
if (pan_rc_in && (rc_ch(pan_rc_in))) {
_angle_ef_target_rad.z += rc_ch(pan_rc_in)->norm_input_dz() * 0.0001f * _frontend._joystick_speed;
_angle_ef_target_rad.z = constrain_float(_angle_ef_target_rad.z, radians(_state._pan_angle_min*0.01f), radians(_state._pan_angle_max*0.01f));
}
} else {
// allow pilot position input to come directly from an RC_Channel
if (roll_rc_in && (rc_ch(roll_rc_in))) {
_angle_ef_target_rad.x = angle_input_rad(rc_ch(roll_rc_in), _state._roll_angle_min, _state._roll_angle_max);
}
if (tilt_rc_in && (rc_ch(tilt_rc_in))) {
_angle_ef_target_rad.y = angle_input_rad(rc_ch(tilt_rc_in), _state._tilt_angle_min, _state._tilt_angle_max);
}
if (pan_rc_in && (rc_ch(pan_rc_in))) {
_angle_ef_target_rad.z = angle_input_rad(rc_ch(pan_rc_in), _state._pan_angle_min, _state._pan_angle_max);
}
}
}
// returns the angle (degrees*100) that the RC_Channel input is receiving
int32_t AP_Mount_Backend::angle_input(RC_Channel* rc, int16_t angle_min, int16_t angle_max)
{
return (rc->get_reverse() ? -1 : 1) * (rc->get_radio_in() - rc->get_radio_min())
* (int32_t)(angle_max - angle_min) / (rc->get_radio_max() - rc->get_radio_min()) + (rc->get_reverse() ? angle_max : angle_min);
}
// returns the angle (radians) that the RC_Channel input is receiving
float AP_Mount_Backend::angle_input_rad(RC_Channel* rc, int16_t angle_min, int16_t angle_max)
{
return radians(angle_input(rc, angle_min, angle_max)*0.01f);
}
// calc_angle_to_location - calculates the earth-frame roll, tilt and pan angles (and radians) to point at the given target
void AP_Mount_Backend::calc_angle_to_location(const struct Location &target, Vector3f& angles_to_target_rad, bool calc_tilt, bool calc_pan, bool relative_pan)
{
float GPS_vector_x = (target.lng-_frontend._current_loc.lng)*cosf(ToRad((_frontend._current_loc.lat+target.lat)*0.00000005f))*0.01113195f;
float GPS_vector_y = (target.lat-_frontend._current_loc.lat)*0.01113195f;
float GPS_vector_z = (target.alt-_frontend._current_loc.alt); // baro altitude(IN CM) should be adjusted to known home elevation before take off (Set altimeter).
float target_distance = 100.0f*norm(GPS_vector_x, GPS_vector_y); // Careful , centimeters here locally. Baro/alt is in cm, lat/lon is in meters.
// initialise all angles to zero
angles_to_target_rad.zero();
// tilt calcs
if (calc_tilt) {
angles_to_target_rad.y = atan2f(GPS_vector_z, target_distance);
}
// pan calcs
if (calc_pan) {
// calc absolute heading and then onvert to vehicle relative yaw
angles_to_target_rad.z = atan2f(GPS_vector_x, GPS_vector_y);
if (relative_pan) {
angles_to_target_rad.z = wrap_PI(angles_to_target_rad.z - _frontend._ahrs.yaw);
}
}
}