Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/libraries/AP_NavEKF3/AP_NavEKF3_Control.cpp

860 lines
37 KiB
C++
Raw Blame History

#include <AP_HAL/AP_HAL.h>
#include "AP_NavEKF3.h"
#include "AP_NavEKF3_core.h"
#include <GCS_MAVLink/GCS.h>
#include "AP_DAL/AP_DAL.h"
// Control filter mode transitions
void NavEKF3_core::controlFilterModes()
{
// Determine motor arm status
prevMotorsArmed = motorsArmed;
motorsArmed = dal.get_armed();
if (motorsArmed && !prevMotorsArmed) {
// set the time at which we arm to assist with checks
timeAtArming_ms = imuSampleTime_ms;
}
// Detect if we are in flight on or ground
detectFlight();
// Determine if learning of wind and magnetic field will be enabled and set corresponding indexing limits to
// avoid unnecessary operations
setWindMagStateLearningMode();
// Check the alignmnent status of the tilt and yaw attitude
// Used during initial bootstrap alignment of the filter
checkAttitudeAlignmentStatus();
// Set the type of inertial navigation aiding used
setAidingMode();
}
/*
return effective value for _magCal for this core
*/
NavEKF3_core::MagCal NavEKF3_core::effective_magCal(void) const
{
// force use of simple magnetic heading fusion for specified cores
if (frontend->_magMask & core_index) {
return MagCal::NEVER;
}
// handle deprecated MagCal::EXTERNAL_YAW and MagCal::EXTERNAL_YAW_FALLBACK values
const int8_t magCalParamVal = frontend->_magCal.get();
if (magCalParamVal == 5) {
return MagCal::NEVER;
}
if (magCalParamVal == 6) {
return MagCal::WHEN_FLYING;
}
return MagCal(magCalParamVal);
}
// Determine if learning of wind and magnetic field will be enabled and set corresponding indexing limits to
// avoid unnecessary operations
void NavEKF3_core::setWindMagStateLearningMode()
{
const bool canEstimateWind = ((finalInflightYawInit && dragFusionEnabled) || assume_zero_sideslip()) &&
!onGround &&
PV_AidingMode != AID_NONE;
if (!inhibitWindStates && !canEstimateWind) {
inhibitWindStates = true;
lastAspdEstIsValid = false;
updateStateIndexLim();
} else if (inhibitWindStates && canEstimateWind &&
(sq(stateStruct.velocity.x) + sq(stateStruct.velocity.y) > sq(5.0f) || dragFusionEnabled)) {
inhibitWindStates = false;
updateStateIndexLim();
// set states and variances
if (yawAlignComplete && assume_zero_sideslip()) {
// if we have a valid heading, set the wind states to the reciprocal of the vehicle heading
// which assumes the vehicle has launched into the wind
// use airspeed if if recent data available
Vector3F tempEuler;
stateStruct.quat.to_euler(tempEuler.x, tempEuler.y, tempEuler.z);
ftype trueAirspeedVariance;
const bool haveAirspeedMeasurement = (tasDataDelayed.allowFusion && (imuDataDelayed.time_ms - tasDataDelayed.time_ms < 500) && useAirspeed());
if (haveAirspeedMeasurement) {
trueAirspeedVariance = constrain_ftype(tasDataDelayed.tasVariance, WIND_VEL_VARIANCE_MIN, WIND_VEL_VARIANCE_MAX);
const ftype windSpeed = sqrtF(sq(stateStruct.velocity.x) + sq(stateStruct.velocity.y)) - tasDataDelayed.tas;
stateStruct.wind_vel.x = windSpeed * cosF(tempEuler.z);
stateStruct.wind_vel.y = windSpeed * sinF(tempEuler.z);
} else {
trueAirspeedVariance = sq(WIND_VEL_VARIANCE_MAX); // use 2-sigma for faster initial convergence
}
// set the wind state variances to the measurement uncertainty
zeroCols(P, 22, 23);
zeroRows(P, 22, 23);
P[22][22] = P[23][23] = trueAirspeedVariance;
windStatesAligned = true;
} else {
// set the variances using a typical max wind speed for small UAV operation
zeroCols(P, 22, 23);
zeroRows(P, 22, 23);
for (uint8_t index=22; index<=23; index++) {
P[index][index] = sq(WIND_VEL_VARIANCE_MAX);
}
}
}
// determine if the vehicle is manoeuvring
manoeuvring = accNavMagHoriz > 0.5f;
// Determine if learning of magnetic field states has been requested by the user
bool magCalRequested =
((effectiveMagCal == MagCal::WHEN_FLYING) && inFlight) || // when flying
((effectiveMagCal == MagCal::WHEN_MANOEUVRING) && manoeuvring) || // when manoeuvring
((effectiveMagCal == MagCal::AFTER_FIRST_CLIMB) && finalInflightYawInit && finalInflightMagInit) || // when initial in-air yaw and mag field reset is complete
(effectiveMagCal == MagCal::ALWAYS); // all the time
// Deny mag calibration request if we aren't using the compass, it has been inhibited by the user,
// we do not have an absolute position reference or are on the ground (unless explicitly requested by the user)
bool magCalDenied = !use_compass() || (effectiveMagCal == MagCal::NEVER) || (onGround && effectiveMagCal != MagCal::ALWAYS);
// Inhibit the magnetic field calibration if not requested or denied
bool setMagInhibit = !magCalRequested || magCalDenied;
if (!inhibitMagStates && setMagInhibit) {
inhibitMagStates = true;
updateStateIndexLim();
// variances will be reset in CovariancePrediction
} else if (inhibitMagStates && !setMagInhibit) {
inhibitMagStates = false;
updateStateIndexLim();
if (magFieldLearned) {
// if we have already learned the field states, then retain the learned variances
P[16][16] = earthMagFieldVar.x;
P[17][17] = earthMagFieldVar.y;
P[18][18] = earthMagFieldVar.z;
P[19][19] = bodyMagFieldVar.x;
P[20][20] = bodyMagFieldVar.y;
P[21][21] = bodyMagFieldVar.z;
} else {
// set the variances equal to the observation variances
for (uint8_t index=16; index<=21; index++) {
P[index][index] = sq(frontend->_magNoise);
}
// set the NE earth magnetic field states using the published declination
// and set the corresponding variances and covariances
alignMagStateDeclination();
}
// request a reset of the yaw and magnetic field states if not done before
if (!magStateInitComplete || (!finalInflightMagInit && inFlight)) {
magYawResetRequest = true;
}
}
// inhibit delta velocity bias learning if we have not yet aligned the tilt
if (tiltAlignComplete && inhibitDelVelBiasStates) {
// activate the states
inhibitDelVelBiasStates = false;
updateStateIndexLim();
// set the initial covariance values
P[13][13] = sq(ACCEL_BIAS_LIM_SCALER * frontend->_accBiasLim * dtEkfAvg);
P[14][14] = P[13][13];
P[15][15] = P[13][13];
}
if (tiltAlignComplete && inhibitDelAngBiasStates) {
// activate the states
inhibitDelAngBiasStates = false;
updateStateIndexLim();
// set the initial covariance values
P[10][10] = sq(radians(InitialGyroBiasUncertainty() * dtEkfAvg));
P[11][11] = P[10][10];
P[12][12] = P[10][10];
}
// If on ground we clear the flag indicating that the magnetic field in-flight initialisation has been completed
// because we want it re-done for each takeoff
if (onGround) {
finalInflightYawInit = false;
finalInflightMagInit = false;
magFieldLearned = false;
}
updateStateIndexLim();
}
// Adjust the indexing limits used to address the covariance, states and other EKF arrays to avoid unnecessary operations
// if we are not using those states
void NavEKF3_core::updateStateIndexLim()
{
if (inhibitWindStates) {
if (inhibitMagStates) {
if (inhibitDelVelBiasStates) {
if (inhibitDelAngBiasStates) {
stateIndexLim = 9;
} else {
stateIndexLim = 12;
}
} else {
stateIndexLim = 15;
}
} else {
stateIndexLim = 21;
}
} else {
stateIndexLim = 23;
}
}
// set the default yaw source
void NavEKF3_core::setYawSource()
{
AP_NavEKF_Source::SourceYaw yaw_source = frontend->sources.getYawSource();
if (wasLearningCompass_ms > 0) {
// can't use compass while it is being calibrated
if (yaw_source == AP_NavEKF_Source::SourceYaw::COMPASS) {
yaw_source = AP_NavEKF_Source::SourceYaw::NONE;
} else if (yaw_source == AP_NavEKF_Source::SourceYaw::GPS_COMPASS_FALLBACK) {
yaw_source = AP_NavEKF_Source::SourceYaw::GPS;
}
}
if (yaw_source != yaw_source_last) {
yaw_source_last = yaw_source;
yaw_source_reset = true;
}
}
// Set inertial navigation aiding mode
void NavEKF3_core::setAidingMode()
{
resetDataSource posResetSource = resetDataSource::DEFAULT;
resetDataSource velResetSource = resetDataSource::DEFAULT;
// Save the previous status so we can detect when it has changed
PV_AidingModePrev = PV_AidingMode;
setYawSource();
// Check that the gyro bias variance has converged
checkGyroCalStatus();
// Handle the special case where we are on ground and disarmed without a yaw measurement
// and navigating. This can occur if not using a magnetometer and yaw was aligned using GPS
// during the previous flight.
if (yaw_source_last == AP_NavEKF_Source::SourceYaw::NONE &&
!motorsArmed &&
onGround &&
PV_AidingMode != AID_NONE)
{
PV_AidingMode = AID_NONE;
yawAlignComplete = false;
yawAlignGpsValidCount = 0;
finalInflightYawInit = false;
ResetVelocity(resetDataSource::DEFAULT);
ResetPosition(resetDataSource::DEFAULT);
ResetHeight();
// preserve quaternion 4x4 covariances, but zero the other rows and columns
for (uint8_t row=0; row<4; row++) {
for (uint8_t col=4; col<24; col++) {
P[row][col] = 0.0f;
}
}
for (uint8_t col=0; col<4; col++) {
for (uint8_t row=4; row<24; row++) {
P[row][col] = 0.0f;
}
}
// keep the IMU bias state variances, but zero the covariances
ftype oldBiasVariance[6];
for (uint8_t row=0; row<6; row++) {
oldBiasVariance[row] = P[row+10][row+10];
}
zeroCols(P,10,15);
zeroRows(P,10,15);
for (uint8_t row=0; row<6; row++) {
P[row+10][row+10] = oldBiasVariance[row];
}
}
// Determine if we should change aiding mode
switch (PV_AidingMode) {
case AID_NONE: {
// Don't allow filter to start position or velocity aiding until the tilt and yaw alignment is complete
// and IMU gyro bias estimates have stabilised
// If GPS usage has been prohiited then we use flow aiding provided optical flow data is present
// GPS aiding is the preferred option unless excluded by the user
if (readyToUseGPS() || readyToUseRangeBeacon() || readyToUseExtNav()) {
PV_AidingMode = AID_ABSOLUTE;
} else if (readyToUseOptFlow() || readyToUseBodyOdm()) {
PV_AidingMode = AID_RELATIVE;
}
break;
}
case AID_RELATIVE: {
// Check if the fusion has timed out (flow measurements have been rejected for too long)
bool flowFusionTimeout = ((imuSampleTime_ms - prevFlowFuseTime_ms) > 5000);
// Check if the fusion has timed out (body odometry measurements have been rejected for too long)
bool bodyOdmFusionTimeout = ((imuSampleTime_ms - prevBodyVelFuseTime_ms) > 5000);
// Enable switch to absolute position mode if GPS or range beacon data is available
// If GPS or range beacons data is not available and flow fusion has timed out, then fall-back to no-aiding
if (readyToUseGPS() || readyToUseRangeBeacon() || readyToUseExtNav()) {
PV_AidingMode = AID_ABSOLUTE;
} else if (flowFusionTimeout && bodyOdmFusionTimeout) {
PV_AidingMode = AID_NONE;
}
break;
}
case AID_ABSOLUTE: {
// Find the minimum time without data required to trigger any check
uint16_t minTestTime_ms = MIN(frontend->tiltDriftTimeMax_ms, MIN(frontend->posRetryTimeNoVel_ms,frontend->posRetryTimeUseVel_ms));
// Check if optical flow data is being used
bool optFlowUsed = (imuSampleTime_ms - prevFlowFuseTime_ms <= minTestTime_ms);
// Check if body odometry data is being used
bool bodyOdmUsed = (imuSampleTime_ms - prevBodyVelFuseTime_ms <= minTestTime_ms);
// Check if airspeed data is being used
bool airSpdUsed = (imuSampleTime_ms - lastTasPassTime_ms <= minTestTime_ms);
// check if drag data is being used
bool dragUsed = (imuSampleTime_ms - lastDragPassTime_ms <= minTestTime_ms);
#if EK3_FEATURE_BEACON_FUSION
// Check if range beacon data is being used
const bool rngBcnUsed = (imuSampleTime_ms - rngBcn.lastPassTime_ms <= minTestTime_ms);
#else
const bool rngBcnUsed = false;
#endif
// Check if GPS or external nav is being used
bool posUsed = (imuSampleTime_ms - lastPosPassTime_ms <= minTestTime_ms);
bool gpsVelUsed = (imuSampleTime_ms - lastVelPassTime_ms <= minTestTime_ms);
// Check if attitude drift has been constrained by a measurement source
bool attAiding = posUsed || gpsVelUsed || optFlowUsed || airSpdUsed || dragUsed || rngBcnUsed || bodyOdmUsed;
// Check if velocity drift has been constrained by a measurement source
// Currently these are all the same source as will stabilise attitude because we do not currently have
// a sensor that only observes attitude
velAiding = posUsed || gpsVelUsed || optFlowUsed || airSpdUsed || dragUsed || rngBcnUsed || bodyOdmUsed;
// Store the last valid airspeed estimate
windStateIsObservable = !inhibitWindStates && (posUsed || gpsVelUsed || optFlowUsed || rngBcnUsed || bodyOdmUsed);
if (windStateIsObservable) {
lastAirspeedEstimate = (stateStruct.velocity - Vector3F(stateStruct.wind_vel.x, stateStruct.wind_vel.y, 0.0F)).length();
lastAspdEstIsValid = true;
}
// check if position drift has been constrained by a measurement source
bool posAiding = posUsed || rngBcnUsed;
// Check if the loss of attitude aiding has become critical
bool attAidLossCritical = false;
if (!attAiding) {
attAidLossCritical = (imuSampleTime_ms - prevFlowFuseTime_ms > frontend->tiltDriftTimeMax_ms) &&
(imuSampleTime_ms - lastTasPassTime_ms > frontend->tiltDriftTimeMax_ms) &&
#if EK3_FEATURE_BEACON_FUSION
(imuSampleTime_ms - rngBcn.lastPassTime_ms > frontend->tiltDriftTimeMax_ms) &&
#endif
(imuSampleTime_ms - lastPosPassTime_ms > frontend->tiltDriftTimeMax_ms) &&
(imuSampleTime_ms - lastVelPassTime_ms > frontend->tiltDriftTimeMax_ms);
}
// Check if the loss of position accuracy has become critical
bool posAidLossCritical = false;
if (!posAiding) {
uint16_t maxLossTime_ms;
if (!velAiding) {
maxLossTime_ms = frontend->posRetryTimeNoVel_ms;
} else {
maxLossTime_ms = frontend->posRetryTimeUseVel_ms;
}
posAidLossCritical =
#if EK3_FEATURE_BEACON_FUSION
(imuSampleTime_ms - rngBcn.lastPassTime_ms > maxLossTime_ms) &&
#endif
(imuSampleTime_ms - lastPosPassTime_ms > maxLossTime_ms);
}
if (attAidLossCritical) {
// if the loss of attitude data is critical, then put the filter into a constant position mode
PV_AidingMode = AID_NONE;
posTimeout = true;
velTimeout = true;
tasTimeout = true;
dragTimeout = true;
gpsIsInUse = false;
} else if (posAidLossCritical) {
// if the loss of position is critical, declare all sources of position aiding as being timed out
posTimeout = true;
velTimeout = !optFlowUsed && !gpsVelUsed && !bodyOdmUsed;
gpsIsInUse = false;
}
break;
}
}
// check to see if we are starting or stopping aiding and set states and modes as required
if (PV_AidingMode != PV_AidingModePrev) {
// set various usage modes based on the condition when we start aiding. These are then held until aiding is stopped.
switch (PV_AidingMode) {
case AID_NONE:
// We have ceased aiding
GCS_SEND_TEXT(MAV_SEVERITY_WARNING, "EKF3 IMU%u stopped aiding",(unsigned)imu_index);
// When not aiding, estimate orientation & height fusing synthetic constant position and zero velocity measurement to constrain tilt errors
posTimeout = true;
velTimeout = true;
// Reset the normalised innovation to avoid false failing bad fusion tests
velTestRatio = 0.0f;
posTestRatio = 0.0f;
// store the current position to be used to keep reporting the last known position
lastKnownPositionNE.x = stateStruct.position.x;
lastKnownPositionNE.y = stateStruct.position.y;
// initialise filtered altitude used to provide a takeoff reference to current baro on disarm
// this reduces the time required for the baro noise filter to settle before the filtered baro data can be used
meaHgtAtTakeOff = baroDataDelayed.hgt;
// reset the vertical position state to faster recover from baro errors experienced during touchdown
stateStruct.position.z = -meaHgtAtTakeOff;
// store the current height to be used to keep reporting
// the last known position
lastKnownPositionD = stateStruct.position.z;
// reset relative aiding sensor fusion activity status
flowFusionActive = false;
bodyVelFusionActive = false;
break;
case AID_RELATIVE:
// We are doing relative position navigation where velocity errors are constrained, but position drift will occur
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u started relative aiding",(unsigned)imu_index);
if (readyToUseOptFlow()) {
// Reset time stamps
flowValidMeaTime_ms = imuSampleTime_ms;
prevFlowFuseTime_ms = imuSampleTime_ms;
} else if (readyToUseBodyOdm()) {
// Reset time stamps
lastbodyVelPassTime_ms = imuSampleTime_ms;
prevBodyVelFuseTime_ms = imuSampleTime_ms;
}
posTimeout = true;
velTimeout = true;
break;
case AID_ABSOLUTE:
if (readyToUseGPS()) {
// We are commencing aiding using GPS - this is the preferred method
posResetSource = resetDataSource::GPS;
velResetSource = resetDataSource::GPS;
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u is using GPS",(unsigned)imu_index);
#if EK3_FEATURE_BEACON_FUSION
} else if (readyToUseRangeBeacon()) {
// We are commencing aiding using range beacons
posResetSource = resetDataSource::RNGBCN;
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u is using range beacons",(unsigned)imu_index);
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u initial pos NE = %3.1f,%3.1f (m)",(unsigned)imu_index,(double)rngBcn.receiverPos.x,(double)rngBcn.receiverPos.y);
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u initial beacon pos D offset = %3.1f (m)",(unsigned)imu_index,(double)rngBcn.posOffsetNED.z);
#endif // EK3_FEATURE_BEACON_FUSION
#if EK3_FEATURE_EXTERNAL_NAV
} else if (readyToUseExtNav()) {
// we are commencing aiding using external nav
posResetSource = resetDataSource::EXTNAV;
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u is using external nav data",(unsigned)imu_index);
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u initial pos NED = %3.1f,%3.1f,%3.1f (m)",(unsigned)imu_index,(double)extNavDataDelayed.pos.x,(double)extNavDataDelayed.pos.y,(double)extNavDataDelayed.pos.z);
if (useExtNavVel) {
velResetSource = resetDataSource::EXTNAV;
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u initial vel NED = %3.1f,%3.1f,%3.1f (m/s)",(unsigned)imu_index,(double)extNavVelDelayed.vel.x,(double)extNavVelDelayed.vel.y,(double)extNavVelDelayed.vel.z);
}
// handle height reset as special case
hgtMea = -extNavDataDelayed.pos.z;
posDownObsNoise = sq(constrain_ftype(extNavDataDelayed.posErr, 0.1f, 10.0f));
ResetHeight();
#endif // EK3_FEATURE_EXTERNAL_NAV
}
// clear timeout flags as a precaution to avoid triggering any additional transitions
posTimeout = false;
velTimeout = false;
// reset the last fusion accepted times to prevent unwanted activation of timeout logic
lastPosPassTime_ms = imuSampleTime_ms;
lastVelPassTime_ms = imuSampleTime_ms;
#if EK3_FEATURE_BEACON_FUSION
rngBcn.lastPassTime_ms = imuSampleTime_ms;
#endif
break;
}
// Always reset the position and velocity when changing mode
ResetVelocity(velResetSource);
ResetPosition(posResetSource);
}
}
// Check the tilt and yaw alignmnent status
// Used during initial bootstrap alignment of the filter
void NavEKF3_core::checkAttitudeAlignmentStatus()
{
// Check for tilt convergence - used during initial alignment
// Once the tilt variances have reduced, re-set the yaw and magnetic field states
// and declare the tilt alignment complete
if (!tiltAlignComplete) {
if (tiltErrorVariance < sq(radians(5.0))) {
tiltAlignComplete = true;
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u tilt alignment complete",(unsigned)imu_index);
}
}
// submit yaw and magnetic field reset request
if (!yawAlignComplete && tiltAlignComplete && use_compass()) {
magYawResetRequest = true;
}
}
// return true if we should use the airspeed sensor
bool NavEKF3_core::useAirspeed(void) const
{
return dal.airspeed_sensor_enabled();
}
// return true if we should use the range finder sensor
bool NavEKF3_core::useRngFinder(void) const
{
// TO-DO add code to set this based in setting of optical flow use parameter and presence of sensor
return true;
}
// return true if the filter is ready to start using optical flow measurements
bool NavEKF3_core::readyToUseOptFlow(void) const
{
// ensure flow is used for navigation and not terrain alt estimation
if (frontend->_flowUse != FLOW_USE_NAV) {
return false;
}
if (!frontend->sources.useVelXYSource(AP_NavEKF_Source::SourceXY::OPTFLOW)) {
return false;
}
// We need stable roll/pitch angles and gyro bias estimates but do not need the yaw angle aligned to use optical flow
return (imuSampleTime_ms - flowMeaTime_ms < 200) && tiltAlignComplete && delAngBiasLearned;
}
// return true if the filter is ready to start using body frame odometry measurements
bool NavEKF3_core::readyToUseBodyOdm(void) const
{
#if EK3_FEATURE_BODY_ODOM
if (!frontend->sources.useVelXYSource(AP_NavEKF_Source::SourceXY::EXTNAV) &&
!frontend->sources.useVelXYSource(AP_NavEKF_Source::SourceXY::WHEEL_ENCODER)) {
// exit immediately if sources not configured to fuse external nav or wheel encoders
return false;
}
// Check for fresh visual odometry data that meets the accuracy required for alignment
bool visoDataGood = (imuSampleTime_ms - bodyOdmMeasTime_ms < 200) && (bodyOdmDataNew.velErr < 1.0f);
// Check for fresh wheel encoder data
bool wencDataGood = (imuDataDelayed.time_ms - wheelOdmDataDelayed.time_ms < 200);
// We require stable roll/pitch angles and gyro bias estimates but do not need the yaw angle aligned to use odometry measurements
// because they are in a body frame of reference
return (visoDataGood || wencDataGood)
&& tiltAlignComplete
&& delAngBiasLearned;
#else
return false;
#endif // EK3_FEATURE_BODY_ODOM
}
// return true if the filter to be ready to use gps
bool NavEKF3_core::readyToUseGPS(void) const
{
if (frontend->sources.getPosXYSource() != AP_NavEKF_Source::SourceXY::GPS) {
return false;
}
return validOrigin && tiltAlignComplete && yawAlignComplete && (delAngBiasLearned || assume_zero_sideslip()) && gpsGoodToAlign && gpsDataToFuse;
}
// return true if the filter to be ready to use the beacon range measurements
bool NavEKF3_core::readyToUseRangeBeacon(void) const
{
#if EK3_FEATURE_BEACON_FUSION
if (frontend->sources.getPosXYSource() != AP_NavEKF_Source::SourceXY::BEACON) {
return false;
}
return tiltAlignComplete && yawAlignComplete && delAngBiasLearned && rngBcn.alignmentCompleted && rngBcn.dataToFuse;
#else
return false;
#endif // EK3_FEATURE_BEACON_FUSION
}
// return true if the filter is ready to use external nav data
bool NavEKF3_core::readyToUseExtNav(void) const
{
#if EK3_FEATURE_EXTERNAL_NAV
if (frontend->sources.getPosXYSource() != AP_NavEKF_Source::SourceXY::EXTNAV) {
return false;
}
return tiltAlignComplete && extNavDataToFuse;
#else
return false;
#endif // EK3_FEATURE_EXTERNAL_NAV
}
// return true if we should use the compass
bool NavEKF3_core::use_compass(void) const
{
if ((yaw_source_last != AP_NavEKF_Source::SourceYaw::COMPASS) &&
(yaw_source_last != AP_NavEKF_Source::SourceYaw::GPS_COMPASS_FALLBACK)) {
// not using compass as a yaw source
return false;
}
const auto &compass = dal.compass();
return compass.use_for_yaw(magSelectIndex) &&
!allMagSensorsFailed;
}
// are we using (aka fusing) a non-compass yaw?
bool NavEKF3_core::using_noncompass_for_yaw(void) const
{
#if EK3_FEATURE_EXTERNAL_NAV
if (yaw_source_last == AP_NavEKF_Source::SourceYaw::EXTNAV) {
return ((imuSampleTime_ms - last_extnav_yaw_fusion_ms < 5000) || (imuSampleTime_ms - lastSynthYawTime_ms < 5000));
}
#endif
if (yaw_source_last == AP_NavEKF_Source::SourceYaw::GPS || yaw_source_last == AP_NavEKF_Source::SourceYaw::GPS_COMPASS_FALLBACK ||
yaw_source_last == AP_NavEKF_Source::SourceYaw::GSF || !use_compass()) {
return imuSampleTime_ms - last_gps_yaw_ms < 5000 || imuSampleTime_ms - lastSynthYawTime_ms < 5000;
}
return false;
}
// are we using (aka fusing) external nav for yaw?
bool NavEKF3_core::using_extnav_for_yaw() const
{
#if EK3_FEATURE_EXTERNAL_NAV
if (yaw_source_last == AP_NavEKF_Source::SourceYaw::EXTNAV) {
return ((imuSampleTime_ms - last_extnav_yaw_fusion_ms < 5000) || (imuSampleTime_ms - lastSynthYawTime_ms < 5000));
}
#endif
return false;
}
/*
should we assume zero sideslip?
*/
bool NavEKF3_core::assume_zero_sideslip(void) const
{
// we don't assume zero sideslip for ground vehicles as EKF could
// be quite sensitive to a rapid spin of the ground vehicle if
// traction is lost
return dal.get_fly_forward() && dal.get_vehicle_class() != AP_DAL::VehicleClass::GROUND;
}
// sets the local NED origin using a LLH location (latitude, longitude, height)
// returns false if the origin is already set
bool NavEKF3_core::setOriginLLH(const Location &loc)
{
return setOrigin(loc);
}
// populates the Earth magnetic field table using the given location
void NavEKF3_core::setEarthFieldFromLocation(const Location &loc)
{
const auto &compass = dal.compass();
if (compass.have_scale_factor(magSelectIndex) &&
compass.auto_declination_enabled()) {
getEarthFieldTable(loc);
if (frontend->_mag_ef_limit > 0) {
// initialise earth field from tables
stateStruct.earth_magfield = table_earth_field_ga;
}
}
}
// sets the local NED origin using a LLH location (latitude, longitude, height)
// returns false is the origin has already been set
bool NavEKF3_core::setOrigin(const Location &loc)
{
// if the origin is valid reject setting a new origin
if (validOrigin) {
return false;
}
EKF_origin = loc;
ekfGpsRefHgt = (double)0.01 * (double)EKF_origin.alt;
// define Earth rotation vector in the NED navigation frame at the origin
calcEarthRateNED(earthRateNED, EKF_origin.lat);
validOrigin = true;
// but we do want to populate the WMM table even if we don't have a GPS at all
if (!stateStruct.quat.is_zero()) {
alignMagStateDeclination();
setEarthFieldFromLocation(EKF_origin);
}
GCS_SEND_TEXT(MAV_SEVERITY_INFO, "EKF3 IMU%u origin set",(unsigned)imu_index);
if (!frontend->common_origin_valid) {
frontend->common_origin_valid = true;
// put origin in frontend as well to ensure it stays in sync between lanes
public_origin = EKF_origin;
}
return true;
}
// record all requested yaw resets completed
void NavEKF3_core::recordYawResetsCompleted()
{
gpsYawResetRequest = false;
magYawResetRequest = false;
yawAlignComplete = true;
if (inFlight) {
finalInflightYawInit = true;
}
}
// set the class variable true if the delta angle bias variances are sufficiently small
void NavEKF3_core::checkGyroCalStatus(void)
{
// check delta angle bias variances
const ftype delAngBiasVarMax = sq(radians(0.15 * dtEkfAvg));
if (!use_compass() && (yaw_source_last != AP_NavEKF_Source::SourceYaw::GPS) && (yaw_source_last != AP_NavEKF_Source::SourceYaw::GPS_COMPASS_FALLBACK) &&
(yaw_source_last != AP_NavEKF_Source::SourceYaw::EXTNAV)) {
// rotate the variances into earth frame and evaluate horizontal terms only as yaw component is poorly observable without a yaw reference
// which can make this check fail
const Vector3F delAngBiasVarVec { P[10][10], P[11][11], P[12][12] };
const Vector3F temp = prevTnb * delAngBiasVarVec;
delAngBiasLearned = (fabsF(temp.x) < delAngBiasVarMax) &&
(fabsF(temp.y) < delAngBiasVarMax);
} else {
delAngBiasLearned = (P[10][10] <= delAngBiasVarMax) &&
(P[11][11] <= delAngBiasVarMax) &&
(P[12][12] <= delAngBiasVarMax);
}
}
// Update the filter status
void NavEKF3_core::updateFilterStatus(void)
{
// init return value
nav_filter_status status;
status.value = 0;
bool doingBodyVelNav = (PV_AidingMode != AID_NONE) && (imuSampleTime_ms - prevBodyVelFuseTime_ms < 5000);
bool doingFlowNav = (PV_AidingMode != AID_NONE) && flowDataValid;
bool doingWindRelNav = (!tasTimeout && assume_zero_sideslip()) || !dragTimeout;
bool doingNormalGpsNav = !posTimeout && (PV_AidingMode == AID_ABSOLUTE);
bool someVertRefData = (!velTimeout && (useGpsVertVel || useExtNavVel)) || !hgtTimeout;
bool someHorizRefData = !(velTimeout && posTimeout && tasTimeout && dragTimeout) || doingFlowNav || doingBodyVelNav;
bool filterHealthy = healthy() && tiltAlignComplete && (yawAlignComplete || (!use_compass() && (PV_AidingMode != AID_ABSOLUTE)));
// If GPS height usage is specified, height is considered to be inaccurate until the GPS passes all checks
bool hgtNotAccurate = (frontend->sources.getPosZSource() == AP_NavEKF_Source::SourceZ::GPS) && !validOrigin;
// set individual flags
status.flags.attitude = !stateStruct.quat.is_nan() && filterHealthy; // attitude valid (we need a better check)
status.flags.horiz_vel = someHorizRefData && filterHealthy; // horizontal velocity estimate valid
status.flags.vert_vel = someVertRefData && filterHealthy; // vertical velocity estimate valid
status.flags.horiz_pos_rel = ((doingFlowNav && gndOffsetValid) || doingWindRelNav || doingNormalGpsNav || doingBodyVelNav) && filterHealthy; // relative horizontal position estimate valid
status.flags.horiz_pos_abs = doingNormalGpsNav && filterHealthy; // absolute horizontal position estimate valid
status.flags.vert_pos = !hgtTimeout && filterHealthy && !hgtNotAccurate; // vertical position estimate valid
status.flags.terrain_alt = gndOffsetValid && filterHealthy; // terrain height estimate valid
status.flags.const_pos_mode = (PV_AidingMode == AID_NONE) && filterHealthy; // constant position mode
status.flags.pred_horiz_pos_rel = status.flags.horiz_pos_rel; // EKF3 enters the required mode before flight
status.flags.pred_horiz_pos_abs = status.flags.horiz_pos_abs; // EKF3 enters the required mode before flight
status.flags.takeoff_detected = takeOffDetected; // takeoff for optical flow navigation has been detected
status.flags.takeoff = dal.get_takeoff_expected(); // The EKF has been told to expect takeoff is in a ground effect mitigation mode and has started the EKF-GSF yaw estimator
status.flags.touchdown = dal.get_touchdown_expected(); // The EKF has been told to detect touchdown and is in a ground effect mitigation mode
status.flags.using_gps = ((imuSampleTime_ms - lastPosPassTime_ms) < 4000) && (PV_AidingMode == AID_ABSOLUTE);
status.flags.gps_glitching = !gpsAccuracyGood && (PV_AidingMode == AID_ABSOLUTE) && (frontend->sources.getPosXYSource() == AP_NavEKF_Source::SourceXY::GPS); // GPS glitching is affecting navigation accuracy
status.flags.gps_quality_good = gpsGoodToAlign;
// for reporting purposes we report rejecting airspeed after 3s of not fusing when we want to fuse the data
status.flags.rejecting_airspeed = lastTasFailTime_ms != 0 &&
(imuSampleTime_ms - lastTasFailTime_ms) < 1000 &&
(imuSampleTime_ms - lastTasPassTime_ms) > 3000;
status.flags.initalized = status.flags.initalized || healthy();
status.flags.dead_reckoning = (PV_AidingMode != AID_NONE) && doingWindRelNav && !((doingFlowNav && gndOffsetValid) || doingNormalGpsNav || doingBodyVelNav);
filterStatus.value = status.value;
}
void NavEKF3_core::runYawEstimatorPrediction()
{
// exit immediately if no yaw estimator
if (yawEstimator == nullptr) {
return;
}
// ensure GPS is used for horizontal position and velocity
if (frontend->sources.getPosXYSource() != AP_NavEKF_Source::SourceXY::GPS ||
!frontend->sources.useVelXYSource(AP_NavEKF_Source::SourceXY::GPS)) {
return;
}
ftype trueAirspeed;
if (tasDataDelayed.allowFusion && assume_zero_sideslip()) {
trueAirspeed = MAX(tasDataDelayed.tas, 0.0f);
} else {
trueAirspeed = 0.0f;
}
yawEstimator->update(imuDataDelayed.delAng, imuDataDelayed.delVel, imuDataDelayed.delAngDT, imuDataDelayed.delVelDT, EKFGSF_run_filterbank, trueAirspeed);
}
void NavEKF3_core::runYawEstimatorCorrection()
{
// exit immediately if no yaw estimator
if (yawEstimator == nullptr) {
return;
}
// ensure GPS is used for horizontal position and velocity
if (frontend->sources.getPosXYSource() != AP_NavEKF_Source::SourceXY::GPS ||
!frontend->sources.useVelXYSource(AP_NavEKF_Source::SourceXY::GPS)) {
return;
}
if (EKFGSF_run_filterbank) {
if (gpsDataToFuse) {
Vector2F gpsVelNE = Vector2F(gpsDataDelayed.vel.x, gpsDataDelayed.vel.y);
ftype gpsVelAcc = fmaxF(gpsSpdAccuracy, ftype(frontend->_gpsHorizVelNoise));
yawEstimator->fuseVelData(gpsVelNE, gpsVelAcc);
// after velocity data has been fused the yaw variance estimate will have been refreshed and
// is used maintain a history of validity
ftype gsfYaw, gsfYawVariance;
if (EKFGSF_getYaw(gsfYaw, gsfYawVariance)) {
if (EKFGSF_yaw_valid_count < GSF_YAW_VALID_HISTORY_THRESHOLD) {
EKFGSF_yaw_valid_count++;
}
} else {
EKFGSF_yaw_valid_count = 0;
}
}
// action an external reset request
if (EKFGSF_yaw_reset_request_ms > 0 && imuSampleTime_ms - EKFGSF_yaw_reset_request_ms < YAW_RESET_TO_GSF_TIMEOUT_MS) {
EKFGSF_resetMainFilterYaw(true);
}
} else {
EKFGSF_yaw_valid_count = 0;
}
}
// request a reset the yaw to the GSF estimate
// request times out after YAW_RESET_TO_GSF_TIMEOUT_MS if it cannot be actioned
void NavEKF3_core::EKFGSF_requestYawReset()
{
EKFGSF_yaw_reset_request_ms = imuSampleTime_ms;
}
Reference in New Issue View Git Blame Copy Permalink