mirror of https://github.com/ArduPilot/ardupilot
24 lines
1.1 KiB
Markdown
24 lines
1.1 KiB
Markdown
# Mount Viewpro Driver
|
|
|
|
Viewpro gimbal driver lua script
|
|
|
|
How to use
|
|
Connect gimbal UART to one of the autopilot's serial ports
|
|
Set SERIALx_PROTOCOL = 28 (Scripting) where "x" corresponds to the serial port connected to the gimbal
|
|
Set SCR_ENABLE = 1 to enable scripting and reboot the autopilot
|
|
Set MNT1_TYPE = 9 (Scripting) to enable the mount/gimbal scripting driver
|
|
Set CAM_TRIGG_TYPE = 3 (Mount) to enable camera control using the mount driver
|
|
Set RCx_OPTION = 300 (Scripting1) to allow real-time selection of the video feed and camera control
|
|
Copy this script to the autopilot's SD card in the APM/scripts directory and reboot the autopilot
|
|
Set VIEP_CAM_SWLOW, VIEP_CAM_SWMID, VIEP_CAM_SWHIGH to which cameras are controlled by the auxiliary switch
|
|
0: No change in camera selection
|
|
1: EO1
|
|
2: IR thermal
|
|
3: EO1 + IR Picture-in-picture
|
|
4: IR + EO1 Picture-in-picture
|
|
5: Fusion
|
|
6: IR1 13mm
|
|
7: IR2 52mm
|
|
Set VIEP_ZOOM_SPEED to control speed of zoom (value between 0 and 7)
|
|
Set VIEP_DEBUG = 1 or 2 to increase level of debug output to the GCS
|