ardupilot/libraries/AP_Airspeed
Peter Barker f9580c0dfe AP_Airspeed: add date for parameter conversion code 2021-11-23 12:27:14 +00:00
..
examples/Airspeed AP_Airspeed: fix examples for AP_AHRS_DCM becoming backend 2021-08-31 14:28:53 +10:00
models AP_Airspeed: add MATLAB based NMEA sensor example 2020-10-27 11:24:49 +11:00
AP_Airspeed.cpp AP_Airspeed: add date for parameter conversion code 2021-11-23 12:27:14 +00:00
AP_Airspeed.h AP_Airspeed: allow for an AIRSPEED list in hwdef.dat 2021-09-21 13:51:40 +10:00
AP_Airspeed_ASP5033.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_ASP5033.h AP_Airspeed: added ASP5033 driver 2021-03-28 07:50:34 +11:00
AP_Airspeed_Backend.cpp AP_Airspeed: support 3 I2C addresses for MS4525 2021-07-12 17:14:59 +10:00
AP_Airspeed_Backend.h AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction 2021-07-12 17:14:59 +10:00
AP_Airspeed_DLVR.cpp AP_Airspeed: allow for an AIRSPEED list in hwdef.dat 2021-09-21 13:51:40 +10:00
AP_Airspeed_DLVR.h AP_Airspeed: allow for an AIRSPEED list in hwdef.dat 2021-09-21 13:51:40 +10:00
AP_Airspeed_Health.cpp AP_Airspeed: add dedicated MAX_WIND param 2020-10-27 11:21:04 +11:00
AP_Airspeed_MS4525.cpp AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
AP_Airspeed_MS4525.h AP_Airspeed: support 3 I2C addresses for MS4525 2021-07-12 17:14:59 +10:00
AP_Airspeed_MS5525.cpp AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
AP_Airspeed_MS5525.h AP_Airspeed: removed #include duplicates 2019-01-03 09:40:50 +09:00
AP_Airspeed_MSP.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_MSP.h AP_Airspeed: added MSP backend 2020-12-08 20:41:12 +11:00
AP_Airspeed_NMEA.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_NMEA.h AP_Airspeed: add NMEA water speed backend 2020-10-27 11:24:49 +11:00
AP_Airspeed_SDP3X.cpp AP_Airspeed: move from HAL_NO_GCS to HAL_GCS_ENABLED 2021-09-22 21:37:00 +10:00
AP_Airspeed_SDP3X.h AP_Airspeed: remove size warning on SDP3X crc function. 2020-10-14 07:52:02 +11:00
AP_Airspeed_UAVCAN.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_UAVCAN.h AP_Airspeed: enable for use in AP_Periph 2019-10-21 19:12:01 +11:00
AP_Airspeed_analog.cpp AP_Airspeed: analog: check valid pin 2021-10-06 18:42:51 +11:00
AP_Airspeed_analog.h AP_Airspeed: support dual airspeed sensors 2018-01-16 07:14:20 +11:00
Airspeed_Calibration.cpp AP_Airspeed: add inflight airspeed cal rc switch 2020-11-25 21:30:15 +11:00