.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: cleanup enabling of cli and frsky telem for APM
|
2014-09-20 14:41:26 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
AP_State.pde
|
Copter: add land_complete_maybe flag
|
2014-09-19 16:43:15 +09:00 |
ArduCopter.pde
|
Copter: add land_complete_maybe flag
|
2014-09-19 16:43:15 +09:00 |
Attitude.pde
|
Copter: sanity check throttle deadzone
|
2014-09-02 12:40:15 +09:00 |
GCS_Mavlink.pde
|
Copter: print frame type in log headers
|
2014-09-27 16:11:21 +09:00 |
Log.pde
|
Copter: print frame type in log headers
|
2014-09-27 16:11:21 +09:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: throttle deadzone parameter
|
2014-08-29 15:54:34 +09:00 |
Parameters.pde
|
Copter: add AC3.2 default to LOG_BITMASK value
|
2014-09-25 15:32:21 +09:00 |
ReleaseNotes.txt
|
Copter: update AC3.2-rc10 release notes
|
2014-09-24 14:30:10 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
commands.pde
|
Copter: bug fix to remove home variable
|
2014-06-11 12:01:48 +09:00 |
commands_logic.pde
|
Copter: bugfix to condition-yaw for relative angles
|
2014-09-26 12:22:58 +09:00 |
compassmot.pde
|
AP_Motors: throttle_pass_through accepts pwm
|
2014-09-19 22:21:45 +09:00 |
compat.h
|
Copter: remove unused HIGH, LOW definitions
|
2014-05-09 16:35:21 +09:00 |
compat.pde
|
Copter: remove unused compat.pde entries
|
2014-01-30 14:33:55 +09:00 |
config.h
|
Copter: print frame type in log headers
|
2014-09-27 16:11:21 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_acro.pde
|
Copter: range check ACRO_EXPO to be no more than 1
|
2014-08-18 12:56:22 +09:00 |
control_althold.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_auto.pde
|
Copter: shift pos targets to current location before takeoff
|
2014-09-29 15:26:54 +09:00 |
control_autotune.pde
|
Copter: increase autotune limits
|
2014-09-22 21:33:35 +09:00 |
control_circle.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_drift.pde
|
Copter: move drift thr assist to separate function
|
2014-08-31 14:22:56 +09:00 |
control_flip.pde
|
Copter: ensure motors don't stop during flip
|
2014-08-23 23:40:13 +09:00 |
control_guided.pde
|
Copter: shift pos targets to current location before takeoff
|
2014-09-29 15:26:54 +09:00 |
control_land.pde
|
Copter: rename land_maybe_complete function
|
2014-09-19 16:43:17 +09:00 |
control_loiter.pde
|
Copter: rename land_maybe_complete function
|
2014-09-19 16:43:17 +09:00 |
control_ofloiter.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_poshold.pde
|
Copter: rename land_maybe_complete function
|
2014-09-19 16:43:17 +09:00 |
control_rtl.pde
|
Copter: rename land_maybe_complete function
|
2014-09-19 16:43:17 +09:00 |
control_sport.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_stabilize.pde
|
Copter: Don't use land detector to stop stabilizing in stabilize
|
2014-07-08 19:41:41 +09:00 |
crash_check.pde
|
Copter: check parachute is enabled before manual_release
|
2014-04-07 13:37:15 +09:00 |
defines.h
|
Copter: add land_complete_maybe flag
|
2014-09-19 16:43:15 +09:00 |
ekf_check.pde
|
Copter: increase EKF_CHECK_THRESH default to 0.8
|
2014-09-09 14:59:27 +09:00 |
esc_calibration.pde
|
Copter: auto esc calibration
|
2014-09-19 22:21:49 +09:00 |
events.pde
|
Copter: low battery msg to severity high
|
2014-09-21 17:33:19 +09:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: remove unused variables from fence.pde
|
2014-04-27 11:11:12 +09:00 |
flight_mode.pde
|
Copter: remove get_angle_targets_for_reporting fn
|
2014-08-22 22:56:21 +09:00 |
heli.h
|
TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM.
|
2014-07-13 17:11:30 +09:00 |
heli.pde
|
TradHeli: Force recalc scalers after setting main loop time in MotorsHeli so that ramp scalers are right for 32-bit.
|
2014-07-13 17:11:25 +09:00 |
heli_control_acro.pde
|
TradHeli: call passthrough_bf_roll_pitch_rate_yaw
|
2014-08-22 16:29:00 +09:00 |
heli_control_stabilize.pde
|
TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM.
|
2014-07-13 17:11:30 +09:00 |
inertia.pde
|
Copter: flag current alt as relative
|
2014-06-17 14:11:42 +10:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motor_test.pde
|
Copter: remove meaningless check from motor_test
|
2014-05-09 13:48:44 +09:00 |
motors.pde
|
Copter: use disparity threshold define for pre-arm checks
|
2014-09-23 19:33:04 +09:00 |
navigation.pde
|
Copter: bug fix for conditional_distance command
|
2014-04-17 22:23:28 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
Copter: bug fix display of PerfMon log's num long loops
|
2014-03-08 15:17:03 +09:00 |
position_vector.pde
|
Copter: restore pv_get_horizontal_distance_cm function
|
2014-07-06 17:01:05 +09:00 |
radio.pde
|
Copter: allow passthru for ch 9 ~ 14
|
2014-09-23 22:55:19 +09:00 |
readme.txt
|
Copter: readme file renamed and directs to wiki
|
2014-02-12 21:03:45 +09:00 |
sensors.pde
|
Copter: integrate EPM ver2
|
2014-09-17 21:13:35 +09:00 |
setup.pde
|
Copter: move esc calibration to separate file
|
2014-09-19 22:21:47 +09:00 |
switches.pde
|
Copter: remove EPM neutral from ch7/ch8 switch
|
2014-09-17 21:13:45 +09:00 |
system.pde
|
Copter: low battery msg to severity high
|
2014-09-21 17:33:19 +09:00 |
test.pde
|
Copter: use baro healthy()
|
2014-08-14 16:03:23 +09:00 |