mirror of https://github.com/ArduPilot/ardupilot
89 lines
3.8 KiB
C++
89 lines
3.8 KiB
C++
#include "AP_Frsky_D.h"
|
|
|
|
#if AP_FRSKY_D_TELEM_ENABLED
|
|
|
|
#include <AP_AHRS/AP_AHRS.h>
|
|
#include <AP_BattMonitor/AP_BattMonitor.h>
|
|
#include <AP_GPS/AP_GPS.h>
|
|
#include <GCS_MAVLink/GCS.h>
|
|
|
|
/*
|
|
send 1 byte and do byte stuffing
|
|
*/
|
|
void AP_Frsky_D::send_byte(uint8_t byte)
|
|
{
|
|
if (byte == START_STOP_D) {
|
|
_port->write(0x5D);
|
|
_port->write(0x3E);
|
|
} else if (byte == BYTESTUFF_D) {
|
|
_port->write(0x5D);
|
|
_port->write(0x3D);
|
|
} else {
|
|
_port->write(byte);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* send one uint16 frame of FrSky data - for FrSky D protocol (D-receivers)
|
|
*/
|
|
void AP_Frsky_D::send_uint16(uint16_t id, uint16_t data)
|
|
{
|
|
_port->write(START_STOP_D); // send a 0x5E start byte
|
|
uint8_t *bytes = (uint8_t*)&id;
|
|
send_byte(bytes[0]);
|
|
bytes = (uint8_t*)&data;
|
|
send_byte(bytes[0]); // LSB
|
|
send_byte(bytes[1]); // MSB
|
|
}
|
|
|
|
/*
|
|
* send frame1 and frame2 telemetry data
|
|
* one frame (frame1) is sent every 200ms with baro alt, nb sats, batt volts and amp, control_mode
|
|
* a second frame (frame2) is sent every second (1000ms) with gps position data, and ahrs.yaw_sensor heading (instead of GPS heading)
|
|
* for FrSky D protocol (D-receivers)
|
|
*/
|
|
void AP_Frsky_D::send(void)
|
|
{
|
|
const AP_BattMonitor &_battery = AP::battery();
|
|
uint32_t now = AP_HAL::millis();
|
|
// send frame1 every 200ms
|
|
if (now - _D.last_200ms_frame >= 200) {
|
|
_D.last_200ms_frame = now;
|
|
send_uint16(DATA_ID_TEMP2, (uint16_t)(AP::gps().num_sats() * 10 + AP::gps().status())); // send GPS status and number of satellites as num_sats*10 + status (to fit into a uint8_t)
|
|
send_uint16(DATA_ID_TEMP1, gcs().custom_mode()); // send flight mode
|
|
uint8_t percentage = 0;
|
|
IGNORE_RETURN(_battery.capacity_remaining_pct(percentage));
|
|
send_uint16(DATA_ID_FUEL, (uint16_t)roundf(percentage)); // send battery remaining
|
|
send_uint16(DATA_ID_VFAS, (uint16_t)roundf(_battery.voltage() * 10.0f)); // send battery voltage
|
|
float current;
|
|
if (!_battery.current_amps(current)) {
|
|
current = 0;
|
|
}
|
|
send_uint16(DATA_ID_CURRENT, (uint16_t)roundf(current * 10.0f)); // send current consumption
|
|
calc_nav_alt();
|
|
send_uint16(DATA_ID_BARO_ALT_BP, _SPort_data.alt_nav_meters); // send nav altitude integer part
|
|
send_uint16(DATA_ID_BARO_ALT_AP, _SPort_data.alt_nav_cm); // send nav altitude decimal part
|
|
}
|
|
// send frame2 every second
|
|
if (now - _D.last_1000ms_frame >= 1000) {
|
|
_D.last_1000ms_frame = now;
|
|
AP_AHRS &_ahrs = AP::ahrs();
|
|
send_uint16(DATA_ID_GPS_COURS_BP, (uint16_t)((_ahrs.yaw_sensor / 100) % 360)); // send heading in degree based on AHRS and not GPS
|
|
calc_gps_position();
|
|
if (AP::gps().status() >= 3) {
|
|
send_uint16(DATA_ID_GPS_LAT_BP, _SPort_data.latdddmm); // send gps lattitude degree and minute integer part
|
|
send_uint16(DATA_ID_GPS_LAT_AP, _SPort_data.latmmmm); // send gps lattitude minutes decimal part
|
|
send_uint16(DATA_ID_GPS_LAT_NS, _SPort_data.lat_ns); // send gps North / South information
|
|
send_uint16(DATA_ID_GPS_LONG_BP, _SPort_data.londddmm); // send gps longitude degree and minute integer part
|
|
send_uint16(DATA_ID_GPS_LONG_AP, _SPort_data.lonmmmm); // send gps longitude minutes decimal part
|
|
send_uint16(DATA_ID_GPS_LONG_EW, _SPort_data.lon_ew); // send gps East / West information
|
|
send_uint16(DATA_ID_GPS_SPEED_BP, _SPort_data.speed_in_meter); // send gps speed integer part
|
|
send_uint16(DATA_ID_GPS_SPEED_AP, _SPort_data.speed_in_centimeter); // send gps speed decimal part
|
|
send_uint16(DATA_ID_GPS_ALT_BP, _SPort_data.alt_gps_meters); // send gps altitude integer part
|
|
send_uint16(DATA_ID_GPS_ALT_AP, _SPort_data.alt_gps_cm); // send gps altitude decimal part
|
|
}
|
|
}
|
|
}
|
|
|
|
#endif // AP_FRSKY_D_TELEM_ENABLED
|