| .. |
|
AP_Arming.cpp
|
Plane: check for VTOL takeoff in AUTO
|
2021-12-07 12:51:18 +11:00 |
|
AP_Arming.h
|
Plane: move quadplane arming checks to own function and add angle max and tiltrotor / tailsitter checks
|
2021-11-09 10:45:22 +11:00 |
|
ArduPlane.cpp
|
Plane: fix bug causing wrong thr max and slew to be used during takeoff
|
2021-11-17 19:37:39 +11:00 |
|
Attitude.cpp
|
Plane: fixed reset of steering locked course
|
2021-12-04 07:41:35 +11:00 |
|
GCS_Mavlink.cpp
|
Plane: support send_extended_sys_state
|
2021-11-09 10:22:24 +11:00 |
|
GCS_Mavlink.h
|
Plane: support send_extended_sys_state
|
2021-11-09 10:22:24 +11:00 |
|
GCS_Plane.cpp
|
Plane: use float for set/get output scaled
|
2021-10-20 18:29:58 +11:00 |
|
GCS_Plane.h
|
ArduPlane: create and use INTERNAL_ERROR macro so we get line numbers
|
2020-04-30 13:21:36 +10:00 |
|
Log.cpp
|
Plane: quadplane: log postition controller PIDs
|
2021-11-21 09:01:58 +11:00 |
|
Makefile.waf
|
waf: use single entry point for make wrappers
|
2015-12-10 10:40:34 +09:00 |
|
Parameters.cpp
|
Plane: use @CopyValuesFrom for FLTMODEn parameters
|
2021-12-16 07:11:33 +11:00 |
|
Parameters.h
|
Plane: added support for rate yaw control
|
2021-11-30 16:19:26 +11:00 |
|
Plane.cpp
|
Plane: create generic vehicle management and move runcam to it
|
2019-12-30 13:02:04 +11:00 |
|
Plane.h
|
ArduPlane: clean up short failsafe
|
2021-12-07 10:09:33 +11:00 |
|
RC_Channel.cpp
|
Plane: added QRTL as RCn_OPTION
|
2021-12-02 08:29:07 +11:00 |
|
RC_Channel.h
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
ReleaseNotes.txt
|
Plane: updated release notes for 4.1.5
|
2021-12-13 10:55:44 +11:00 |
|
afs_plane.cpp
|
Plane: use float for set/get output scaled
|
2021-10-20 18:29:58 +11:00 |
|
afs_plane.h
|
ArduPlane: use mission singleton inside AP_AdvancedFailsafe
|
2021-08-03 10:35:24 +10:00 |
|
altitude.cpp
|
Plane: remove SpdHgt and use TECS direct
|
2021-11-13 08:05:39 +11:00 |
|
avoidance_adsb.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
avoidance_adsb.h
|
ArduPlane: use an enumeration for the AP_Avoidance recovery action
|
2020-08-19 11:38:19 +10:00 |
|
commands.cpp
|
Plane: reset VTOL takeoff if not armed
|
2021-12-04 16:51:02 +11:00 |
|
commands_logic.cpp
|
Plane: fixed use before init bug in VTOL land
|
2021-12-01 19:42:42 +11:00 |
|
config.h
|
ArduPlane: add thr position trigger to ThrLandCtrl Q_OPTION
|
2021-08-25 12:32:59 +10:00 |
|
control_modes.cpp
|
Plane: support autotune for yaw rate control
|
2021-11-30 16:19:26 +11:00 |
|
createTags
|
ArduPlane: remove mention to .pde files
|
2016-05-07 22:55:48 -03:00 |
|
defines.h
|
Plane: use enum class for StickMixing
|
2021-11-03 18:06:00 +11:00 |
|
ekf_check.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
events.cpp
|
ArduPlane: clean up short failsafe
|
2021-12-07 10:09:33 +11:00 |
|
failsafe.cpp
|
Plane: use float for set/get output scaled
|
2021-10-20 18:29:58 +11:00 |
|
fence.cpp
|
Plane: remove TRIM_AUTO param
|
2021-09-28 09:16:24 +10:00 |
|
is_flying.cpp
|
Plane: suppress rate D terms in ground mode
|
2021-10-30 18:45:53 +11:00 |
|
mode.cpp
|
Plane: fixed reset of steering locked course
|
2021-12-04 07:41:35 +11:00 |
|
mode.h
|
Plane: LoiterAltQLand: support handle_guided_request
|
2021-09-28 09:31:13 +10:00 |
|
mode_LoiterAltQLand.cpp
|
Plane: LoiterAltQLand: support handle_guided_request
|
2021-09-28 09:31:13 +10:00 |
|
mode_acro.cpp
|
Plane: move auto_throttle_mode to being a method on each mode
|
2021-01-10 16:04:30 +11:00 |
|
mode_auto.cpp
|
ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
|
2021-11-15 20:27:40 +11:00 |
|
mode_autotune.cpp
|
Plane: move auto_throttle_mode to being a method on each mode
|
2021-01-10 16:04:30 +11:00 |
|
mode_avoidADSB.cpp
|
Plane: compile out ADSB mode if required
|
2020-09-24 08:22:16 -07:00 |
|
mode_circle.cpp
|
Plane: move auto_throttle_mode to being a method on each mode
|
2021-01-10 16:04:30 +11:00 |
|
mode_cruise.cpp
|
ArduPlane: Add missing const in member functions
|
2021-02-03 18:45:14 +11:00 |
|
mode_fbwa.cpp
|
Plane: move FBWA_TDRAG_CHAN to RC Options
|
2021-03-17 19:18:46 +11:00 |
|
mode_fbwb.cpp
|
Plane: move auto_throttle_mode to being a method on each mode
|
2021-01-10 16:04:30 +11:00 |
|
mode_guided.cpp
|
Plane: handle_guided_request per mode
|
2021-09-28 09:31:13 +10:00 |
|
mode_loiter.cpp
|
Plane: fix loiter terrain following
|
2021-05-02 18:51:27 +10:00 |
|
mode_manual.cpp
|
Plane: manual stabilize: keep nav pitch and roll up to date
|
2021-11-09 13:44:30 +00:00 |
|
mode_qacro.cpp
|
Plane: Qacro: use new transition class
|
2021-11-02 10:14:36 +11:00 |
|
mode_qautotune.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
mode_qhover.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
mode_qland.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
mode_qloiter.cpp
|
Plane: quadplane: limit pitch for all transitions into position control modes
|
2021-11-17 19:10:56 +11:00 |
|
mode_qrtl.cpp
|
Plane: remove SpdHgt and use TECS direct
|
2021-11-13 08:05:39 +11:00 |
|
mode_qstabilize.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
mode_rtl.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
mode_stabilize.cpp
|
Plane: manual stabilize: keep nav pitch and roll up to date
|
2021-11-09 13:44:30 +00:00 |
|
mode_takeoff.cpp
|
Plane: use float for set/get output scaled
|
2021-10-20 18:29:58 +11:00 |
|
mode_thermal.cpp
|
Plane: mode_thermal: adjust messages to reference parameter names
|
2021-06-30 18:21:03 +10:00 |
|
mode_training.cpp
|
Plane: move auto_throttle_mode to being a method on each mode
|
2021-01-10 16:04:30 +11:00 |
|
motor_test.cpp
|
Plane: get throttle input return float
|
2021-10-20 18:29:58 +11:00 |
|
navigation.cpp
|
AP_Soaring: Override airspeed and flap angle.
|
2021-12-16 07:12:24 +11:00 |
|
parachute.cpp
|
Plane: integrate parachute check_sink_rate
|
2020-10-06 16:14:59 +11:00 |
|
qautotune.cpp
|
Plane: seperate kinimatic shaping from pid limit setting
|
2021-07-10 20:25:05 +09:00 |
|
qautotune.h
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
quadplane.cpp
|
Plane: fix divide by zero in transition time
|
2021-12-10 19:10:51 -08:00 |
|
quadplane.h
|
Plane: limiting POS1 landing target speed
|
2021-11-24 07:15:21 +11:00 |
|
radio.cpp
|
ArduPlane: fix flare rc switch action with flight option bit 10 active
|
2021-11-21 21:00:04 +11:00 |
|
reverse_thrust.cpp
|
Plane: get throttle input return float
|
2021-10-20 18:29:58 +11:00 |
|
sensors.cpp
|
Plane: moved accel cal update to vehicle code
|
2021-09-17 14:07:14 +10:00 |
|
servos.cpp
|
AP_Soaring: Override airspeed and flap angle.
|
2021-12-16 07:12:24 +11:00 |
|
soaring.cpp
|
Plane: soaring: No action if in landing sequence.
|
2021-08-04 06:52:56 +10:00 |
|
system.cpp
|
ArduPlane: move from ENABLE_SCRIPTING to AP_SCRIPTING_ENABLED
|
2021-11-15 20:27:40 +11:00 |
|
tailsitter.cpp
|
Plane: tailsitter: start transtion from desired pitch not actual
|
2021-11-09 13:44:30 +00:00 |
|
tailsitter.h
|
Plane: tailsitter: start transtion from desired pitch not actual
|
2021-11-09 13:44:30 +00:00 |
|
takeoff.cpp
|
Plane: remove SpdHgt and use TECS direct
|
2021-11-13 08:05:39 +11:00 |
|
tiltrotor.cpp
|
Plane: tiltrottor: add missing ff terms
|
2021-12-14 10:14:28 +09:00 |
|
tiltrotor.h
|
Plane: tiltrotor: allow tilt wing as flap
|
2021-11-09 10:46:09 +11:00 |
|
transition.h
|
Plane: quadplane: limit pitch for all transitions into position control modes
|
2021-11-17 19:10:56 +11:00 |
|
tuning.cpp
|
ArduPlane: add and use HAL_QUADPLANE_ENABLED
|
2021-09-14 11:23:18 +10:00 |
|
tuning.h
|
Plane: Add TX FF tuning for Pitch/Roll/Yaw QuadPlane PIDs
|
2021-07-06 09:00:16 +10:00 |
|
version.h
|
Plane: mark master as 4.2.0dev
|
2021-08-01 06:06:26 +10:00 |
|
wscript
|
Plane: remove SpdHgt and use TECS direct
|
2021-11-13 08:05:39 +11:00 |
c44fed34d4