mirror of https://github.com/ArduPilot/ardupilot
55 lines
1.8 KiB
Markdown
55 lines
1.8 KiB
Markdown
# AP_Scripting
|
|
|
|
## Enabling Scripting Support in Builds
|
|
|
|
Scripting is automatically enabled on all boards with at least 1MB of flash space.
|
|
The following example enables scripting, builds the ArduPlane firmware for the Cube, and uploads it.
|
|
|
|
```
|
|
$ waf configure --board=CubeBlack
|
|
|
|
$ waf plane
|
|
|
|
$ waf plane --upload
|
|
```
|
|
|
|
To run SITL you can simply use the `sim_vehicle.py` script which will wrap the configuration, compilation,
|
|
and launching of the simulation into one command for you.
|
|
|
|
|
|
```
|
|
$ Tools/autotest/sim_vehicle.py -v ArduPlane
|
|
```
|
|
|
|
Once you have a vehicle flashed with scripting you need to set the `SCR_ENABLE` parameter to 1 to enable scripting and reboot.
|
|
|
|
## Adding Scripts
|
|
|
|
The vehicle will automatically look for and launch any scripts that are contained in the `scripts` folder when it starts.
|
|
On real hardware this should be inside of the `APM` folder of the SD card. In SITL this should be in the working directory (typically the main `ardupilot` directory).
|
|
|
|
An example script is given below:
|
|
|
|
```lua
|
|
function update () -- periodic function that will be called
|
|
current_pos = ahrs:get_position()
|
|
home = ahrs:get_home()
|
|
if current_pos and home then
|
|
distance = current_pos:get_distance(ahrs:get_home()) -- calculate the distance from home
|
|
if distance > 1000 then -- if more then 1000 meters away
|
|
distance = 1000; -- clamp the distance to 1000 meters
|
|
end
|
|
SRV_Channels:set_output_pwm(96, 1000 + distance) -- set the servo assigned function 96 (scripting3) to a proportional value
|
|
end
|
|
|
|
return update, 1000 -- request to be rerun again 1000 milliseconds (1 second) from now
|
|
end
|
|
|
|
return update, 1000 -- request to be rerun again 1000 milliseconds (1 second) from now
|
|
```
|
|
|
|
## Working with bindings
|
|
|
|
Edit bindings.desc and rebuild. The waf build will automatically
|
|
re-run the code generator.
|