Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ardupilot/libraries/AP_InertialSensor/AP_InertialSensor_ADIS1647x...

322 lines
8.5 KiB
C++
Raw Blame History

/*
* This file is free software: you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This file is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
* See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <utility>
#include <AP_HAL/AP_HAL.h>
#include <AP_Math/AP_Math.h>
#include <AP_HAL/utility/sparse-endian.h>
#include "AP_InertialSensor_ADIS1647x.h"
#define BACKEND_SAMPLE_RATE 2000
/*
device registers
*/
#define REG_PROD_ID 0x72
#define PROD_ID_16470 0x4056
#define PROD_ID_16477 0x405d
#define REG_GLOB_CMD 0x68
#define GLOB_CMD_SW_RESET 0x80
#define REG_RANG_MDL 0x5E // 16477 only
#define REG_DATA_CNTR 0x22
/*
timings
*/
#define T_STALL_US 20U
#define T_RESET_MS 250U
#define TIMING_DEBUG 0
#if TIMING_DEBUG
#define DEBUG_SET_PIN(n,v) hal.gpio->write(55-n, v)
#define DEBUG_TOGGLE_PIN(n) hal.gpio->toggle(55-n)
#else
#define DEBUG_SET_PIN(n,v)
#define DEBUG_TOGGLE_PIN(n)
#endif
extern const AP_HAL::HAL& hal;
AP_InertialSensor_ADIS1647x::AP_InertialSensor_ADIS1647x(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::Device> _dev,
enum Rotation _rotation)
: AP_InertialSensor_Backend(imu)
, dev(std::move(_dev))
, rotation(_rotation)
{
}
AP_InertialSensor_Backend *
AP_InertialSensor_ADIS1647x::probe(AP_InertialSensor &imu,
AP_HAL::OwnPtr<AP_HAL::Device> dev,
enum Rotation rotation)
{
if (!dev) {
return nullptr;
}
auto sensor = new AP_InertialSensor_ADIS1647x(imu, std::move(dev), rotation);
if (!sensor) {
return nullptr;
}
if (!sensor->init()) {
delete sensor;
return nullptr;
}
return sensor;
}
void AP_InertialSensor_ADIS1647x::start()
{
accel_instance = _imu.register_accel(BACKEND_SAMPLE_RATE, dev->get_bus_id_devtype(DEVTYPE_INS_ADIS1647X));
gyro_instance = _imu.register_gyro(BACKEND_SAMPLE_RATE, dev->get_bus_id_devtype(DEVTYPE_INS_ADIS1647X));
// setup sensor rotations from probe()
set_gyro_orientation(gyro_instance, rotation);
set_accel_orientation(accel_instance, rotation);
/*
as the sensor does not have a FIFO we need to jump through some
hoops to ensure we don't lose any samples. This creates a thread
to do the capture, running at very high priority
*/
if (!hal.scheduler->thread_create(FUNCTOR_BIND_MEMBER(&AP_InertialSensor_ADIS1647x::loop, void),
"ADIS1647x",
1024, AP_HAL::Scheduler::PRIORITY_BOOST, 1)) {
AP_HAL::panic("Failed to create ADIS1647x thread");
}
}
/*
check product ID
*/
bool AP_InertialSensor_ADIS1647x::check_product_id(void)
{
uint16_t prod_id = read_reg16(REG_PROD_ID);
switch (prod_id) {
case PROD_ID_16470:
// can do up to 40G
accel_scale = 1.25 * GRAVITY_MSS * 0.001;
_clip_limit = 39.5f * GRAVITY_MSS;
gyro_scale = radians(0.1);
return true;
case PROD_ID_16477:
// can do up to 40G
accel_scale = 1.25 * GRAVITY_MSS * 0.001;
_clip_limit = 39.5f * GRAVITY_MSS;
// RANG_MDL register used for gyro range
uint16_t rang_mdl = read_reg16(REG_RANG_MDL);
switch ((rang_mdl >> 2) & 3) {
case 0:
gyro_scale = radians(1.0/160);
break;
case 1:
gyro_scale = radians(1.0/40);
break;
case 3:
gyro_scale = radians(1.0/10);
break;
default:
return false;
}
return true;
}
return false;
}
bool AP_InertialSensor_ADIS1647x::init()
{
WITH_SEMAPHORE(dev->get_semaphore());
if (!check_product_id()) {
return false;
}
// perform software reset
write_reg16(REG_GLOB_CMD, GLOB_CMD_SW_RESET);
hal.scheduler->delay(T_RESET_MS);
// re-check after reset
if (!check_product_id()) {
return false;
}
// we leave all config registers at defaults
#if TIMING_DEBUG
// useful for debugging scheduling of transfers
hal.gpio->pinMode(52, HAL_GPIO_OUTPUT);
hal.gpio->pinMode(53, HAL_GPIO_OUTPUT);
hal.gpio->pinMode(54, HAL_GPIO_OUTPUT);
hal.gpio->pinMode(55, HAL_GPIO_OUTPUT);
#endif
// we need to use low speed for burst transfers
dev->set_speed(AP_HAL::Device::SPEED_LOW);
return true;
}
/*
read a 16 bit register value
*/
uint16_t AP_InertialSensor_ADIS1647x::read_reg16(uint8_t regnum) const
{
uint8_t req[2] = {regnum, 0};
uint8_t reply[2] {};
dev->transfer(req, sizeof(req), nullptr, 0);
hal.scheduler->delay_microseconds(T_STALL_US);
dev->transfer(nullptr, 0, reply, sizeof(reply));
uint16_t ret = (reply[0]<<8U) | reply[1];
return ret;
}
/*
write a 16 bit register value
*/
void AP_InertialSensor_ADIS1647x::write_reg16(uint8_t regnum, uint16_t value) const
{
uint8_t req[2];
req[0] = (regnum | 0x80);
req[1] = value & 0xFF;
dev->transfer(req, sizeof(req), nullptr, 0);
hal.scheduler->delay_microseconds(T_STALL_US);
req[0] = ((regnum+1) | 0x80);
req[1] = (value>>8) & 0xFF;
dev->transfer(req, sizeof(req), nullptr, 0);
hal.scheduler->delay_microseconds(T_STALL_US);
}
/*
loop to read the sensor
*/
void AP_InertialSensor_ADIS1647x::read_sensor(void)
{
struct adis_data {
uint8_t cmd[2];
uint16_t diag_stat;
int16_t gx;
int16_t gy;
int16_t gz;
int16_t ax;
int16_t ay;
int16_t az;
int16_t temp;
uint16_t counter;
uint8_t pad;
uint8_t checksum;
} data {};
uint64_t sample_start_us = AP_HAL::micros64();
do {
WITH_SEMAPHORE(dev->get_semaphore());
data.cmd[0] = REG_GLOB_CMD;
DEBUG_SET_PIN(2, 1);
if (!dev->transfer((const uint8_t *)&data, sizeof(data), (uint8_t *)&data, sizeof(data))) {
break;
}
DEBUG_SET_PIN(2, 0);
} while (be16toh(data.counter) == last_counter);
DEBUG_SET_PIN(1, 1);
/*
check the 8 bit checksum of the packet
*/
uint8_t sum = 0;
const uint8_t *b = (const uint8_t *)&data.diag_stat;
for (uint8_t i=0; i<offsetof(adis_data, pad) - offsetof(adis_data, diag_stat); i++) {
sum += b[i];
}
if (sum != data.checksum) {
DEBUG_TOGGLE_PIN(3);
DEBUG_TOGGLE_PIN(3);
DEBUG_TOGGLE_PIN(3);
DEBUG_TOGGLE_PIN(3);
// corrupt data
return;
}
/*
check if we have lost a sample
*/
uint16_t counter = be16toh(data.counter);
if (done_first_read && uint16_t(last_counter+1) != counter) {
DEBUG_TOGGLE_PIN(3);
}
done_first_read = true;
last_counter = counter;
Vector3f accel{float(int16_t(be16toh(data.ax))), float(int16_t(be16toh(data.ay))), float(int16_t(be16toh(data.az)))};
Vector3f gyro{float(int16_t(be16toh(data.gx))), float(int16_t(be16toh(data.gy))), float(int16_t(be16toh(data.gz)))};
accel *= accel_scale;
gyro *= gyro_scale;
_rotate_and_correct_accel(accel_instance, accel);
_notify_new_accel_raw_sample(accel_instance, accel, sample_start_us);
_rotate_and_correct_gyro(gyro_instance, gyro);
_notify_new_gyro_raw_sample(gyro_instance, gyro, sample_start_us);
/*
publish average temperature at 20Hz
*/
temp_sum += float(int16_t(be16toh(data.temp))*0.1);
temp_count++;
if (temp_count == 100) {
_publish_temperature(accel_instance, temp_sum/temp_count);
temp_sum = 0;
temp_count = 0;
}
DEBUG_SET_PIN(1, 0);
}
/*
sensor read loop
*/
void AP_InertialSensor_ADIS1647x::loop(void)
{
while (true) {
uint32_t tstart = AP_HAL::micros();
// we deliberately set the period a bit fast to ensure we
// don't lose a sample
const uint32_t period_us = 480;
read_sensor();
uint32_t dt = AP_HAL::micros() - tstart;
if (dt < period_us) {
hal.scheduler->delay_microseconds(period_us - dt);
}
}
}
bool AP_InertialSensor_ADIS1647x::update()
{
update_accel(accel_instance);
update_gyro(gyro_instance);
return true;
}
Reference in New Issue View Git Blame Copy Permalink