ardupilot/libraries/SITL/SIM_Motor.h

85 lines
2.8 KiB
C++

/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
simple electric motor simulation class
*/
#pragma once
#include "SIM_Aircraft.h"
namespace SITL {
/*
class to describe a motor position
*/
class Motor {
public:
float angle;
float yaw_factor;
uint8_t servo;
uint8_t display_order;
// support for tilting motors
int8_t roll_servo = -1;
float roll_min, roll_max;
int8_t pitch_servo = -1;
float pitch_min, pitch_max;
// support for servo slew rate
enum {SERVO_NORMAL, SERVO_RETRACT} servo_type;
float servo_rate = 0.24; // seconds per 60 degrees
uint64_t last_change_usec;
float last_roll_value, last_pitch_value;
Motor(uint8_t _servo, float _angle, float _yaw_factor, uint8_t _display_order) :
servo(_servo), // what servo output drives this motor
angle(_angle), // angle in degrees from front
yaw_factor(_yaw_factor), // positive is clockwise
display_order(_display_order) // order for clockwise display
{}
/*
alternative constructor for tiltable motors
*/
Motor(uint8_t _servo, float _angle, float _yaw_factor, uint8_t _display_order,
int8_t _roll_servo, float _roll_min, float _roll_max,
int8_t _pitch_servo, float _pitch_min, float _pitch_max) :
servo(_servo), // what servo output drives this motor
angle(_angle), // angle in degrees from front
yaw_factor(_yaw_factor), // positive is clockwise
display_order(_display_order), // order for clockwise display
roll_servo(_roll_servo),
roll_min(_roll_min),
roll_max(_roll_max),
pitch_servo(_pitch_servo),
pitch_min(_pitch_min),
pitch_max(_pitch_max)
{}
void calculate_forces(const struct sitl_input &input,
float thrust_scale,
uint8_t motor_offset,
Vector3f &rot_accel, // rad/sec
Vector3f &body_thrust); // Z is down
uint16_t update_servo(uint16_t demand, uint64_t time_usec, float &last_value);
// calculate current and voltage
void current_and_voltage(const struct sitl_input &input, float &voltage, float &current, uint8_t motor_offset);
};
}