Andy Piper 3f681e4626 AP_HAL_ChibiOS: BlitzF745AIO update to ICM-42688 ... enable OSD use minimal FPV config enable compass probing pull uart pins high in bootloader for ELRS		2024-03-12 09:26:58 +11:00
..
hwdef	AP_HAL_ChibiOS: BlitzF745AIO update to ICM-42688	2024-03-12 09:26:58 +11:00
AP_HAL_ChibiOS.h	…
AP_HAL_ChibiOS_Namespace.h	…
AP_HAL_ChibiOS_Private.h	…
AnalogIn.cpp	AP_HAL_ChibiOS: Use correct pin config for ADC2 and ADC3	2024-01-24 08:03:24 +11:00
AnalogIn.h	…
CANFDIface.cpp	HAL_ChibiOS: fixed CANFD timings (again!)	2024-02-09 18:55:08 +11:00
CANFDIface.h	HAL_ChibiOS: fixed CANFD timings	2024-01-25 11:44:02 +11:00
CANIface.h	…
CanIface.cpp	…
DSP.cpp	…
DSP.h	…
Device.cpp	…
Device.h	…
Flash.h	…
GPIO.cpp	HAL_ChibiOS: support building with no GPIOs	2024-01-21 12:30:08 +11:00
GPIO.h	…
HAL_ChibiOS_Class.cpp	waf: remove SKETCH and SKETCHNAME from build sysmte	2024-02-26 15:42:25 +11:00
HAL_ChibiOS_Class.h	…
I2CDevice.cpp	…
I2CDevice.h	…
LogStructure.h	…
RCInput.cpp	…
RCInput.h	…
RCOutput.cpp	AP_HAL_ChibiOS: provide start time and timeout to all dshot APIs that require it	2024-02-28 22:25:48 +11:00
RCOutput.h	AP_HAL_ChibiOS: provide start time and timeout to all dshot APIs that require it	2024-02-28 22:25:48 +11:00
RCOutput_bdshot.cpp	AP_HAL_ChibiOS: provide start time and timeout to all dshot APIs that require it	2024-02-28 22:25:48 +11:00
RCOutput_iofirmware.cpp	AP_HAL_ChibiOS: provide start time and timeout to all dshot APIs that require it	2024-02-28 22:25:48 +11:00
RCOutput_serial.cpp	…
SPIDevice.cpp	…
SPIDevice.h	…
Scheduler.cpp	AP_HAL_ChibiOS: set scheduler task to -4 when running callback tasks	2024-02-21 18:56:50 +11:00
Scheduler.h	…
Semaphores.cpp	HAL_ChibiOS: allow HAL_Semaphore in the bootloader	2024-01-21 12:30:08 +11:00
Semaphores.h	…
SoftSigReader.cpp	…
SoftSigReader.h	…
SoftSigReaderInt.cpp	…
SoftSigReaderInt.h	…
Storage.cpp	waf: remove SKETCH and SKETCHNAME from build sysmte	2024-02-26 15:42:25 +11:00
Storage.h	HAL_ChibiOS: support flash storage with 8k sectors	2024-02-01 11:43:24 +11:00
UARTDriver.cpp	…
UARTDriver.h	…
Util.cpp	AP_HAL_ChibiOS: use HAL_LOGGING_ENABLED in place of HAL_BOOTLOADER_BUILD	2024-02-02 19:21:58 +11:00
Util.h	…
WSPIDevice.cpp	…
WSPIDevice.h	…
bxcan.hpp	…
sdcard.cpp	…
sdcard.h	…
shared_dma.cpp	…
shared_dma.h	…
stdio.cpp	…
system.cpp	HAL_ChibiOS: switched G4 FDCAN clock to 80MHz	2024-01-25 11:44:02 +11:00