ardupilot/libraries/SITL/SIM_Helicopter.cpp

179 lines
5.5 KiB
C++

/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
helicopter simulator class
*/
#include "SIM_Helicopter.h"
#include <stdio.h>
namespace SITL {
Helicopter::Helicopter(const char *home_str, const char *frame_str) :
Aircraft(home_str, frame_str)
{
mass = 2.13f;
/*
scaling from motor power to Newtons. Allows the copter
to hover against gravity when the motor is at hover_throttle
*/
thrust_scale = (mass * GRAVITY_MSS) / hover_throttle;
// calculate lateral thrust ratio for tail rotor
tail_thrust_scale = sinf(radians(hover_lean)) * thrust_scale / yaw_zero;
frame_height = 0.1;
if (strstr(frame_str, "-dual")) {
frame_type = HELI_FRAME_DUAL;
} else if (strstr(frame_str, "-compound")) {
frame_type = HELI_FRAME_COMPOUND;
} else {
frame_type = HELI_FRAME_CONVENTIONAL;
}
gas_heli = (strstr(frame_str, "-gas") != NULL);
}
/*
update the helicopter simulation by one time step
*/
void Helicopter::update(const struct sitl_input &input)
{
// get wind vector setup
update_wind(input);
float rsc = constrain_float((input.servos[7]-1000) / 1000.0f, 0, 1);
// ignition only for gas helis
bool ignition_enabled = gas_heli?(input.servos[5] > 1500):true;
float thrust = 0;
float roll_rate = 0;
float pitch_rate = 0;
float yaw_rate = 0;
float torque_effect_accel = 0;
float lateral_x_thrust = 0;
float lateral_y_thrust = 0;
float swash1 = (input.servos[0]-1000) / 1000.0f;
float swash2 = (input.servos[1]-1000) / 1000.0f;
float swash3 = (input.servos[2]-1000) / 1000.0f;
if (!ignition_enabled) {
rsc = 0;
}
float rsc_scale = rsc/rsc_setpoint;
switch (frame_type) {
case HELI_FRAME_CONVENTIONAL: {
// simulate a traditional helicopter
float tail_rotor = (input.servos[3]-1000) / 1000.0f;
thrust = (rsc/rsc_setpoint) * (swash1+swash2+swash3) / 3.0f;
torque_effect_accel = (rsc_scale+thrust) * rotor_rot_accel;
roll_rate = swash1 - swash2;
pitch_rate = (swash1+swash2) / 2.0f - swash3;
yaw_rate = tail_rotor - 0.5f;
lateral_y_thrust = yaw_rate * rsc_scale * tail_thrust_scale;
break;
}
case HELI_FRAME_DUAL: {
// simulate a tandem helicopter
float swash4 = (input.servos[3]-1000) / 1000.0f;
float swash5 = (input.servos[4]-1000) / 1000.0f;
float swash6 = (input.servos[5]-1000) / 1000.0f;
thrust = (rsc / rsc_setpoint) * (swash1+swash2+swash3+swash4+swash5+swash6) / 6.0f;
torque_effect_accel = (rsc_scale + rsc / rsc_setpoint) * rotor_rot_accel * ((swash1+swash2+swash3) - (swash4+swash5+swash6));
roll_rate = (swash1-swash2) + (swash4-swash5);
pitch_rate = (swash1+swash2+swash3) - (swash4+swash5+swash6);
yaw_rate = (swash1-swash2) + (swash5-swash4);
break;
}
case HELI_FRAME_COMPOUND: {
// simulate a compound helicopter
float right_rotor = (input.servos[3]-1000) / 1000.0f;
float left_rotor = (input.servos[4]-1000) / 1000.0f;
thrust = (rsc/rsc_setpoint) * (swash1+swash2+swash3) / 3.0f;
torque_effect_accel = (rsc_scale+thrust) * rotor_rot_accel;
roll_rate = swash1 - swash2;
pitch_rate = (swash1+swash2) / 2.0f - swash3;
yaw_rate = right_rotor - left_rotor;
lateral_x_thrust = (left_rotor+right_rotor-1) * rsc_scale * tail_thrust_scale;
break;
}
}
roll_rate *= rsc_scale;
pitch_rate *= rsc_scale;
yaw_rate *= rsc_scale;
// rotational acceleration, in rad/s/s, in body frame
Vector3f rot_accel;
rot_accel.x = roll_rate * roll_rate_max;
rot_accel.y = pitch_rate * pitch_rate_max;
rot_accel.z = yaw_rate * yaw_rate_max;
// rotational air resistance
rot_accel.x -= gyro.x * radians(5000.0) / terminal_rotation_rate;
rot_accel.y -= gyro.y * radians(5000.0) / terminal_rotation_rate;
rot_accel.z -= gyro.z * radians(400.0) / terminal_rotation_rate;
// torque effect on tail
rot_accel.z += torque_effect_accel;
// air resistance
Vector3f air_resistance = -velocity_air_ef * (GRAVITY_MSS/terminal_velocity);
// scale thrust to newtons
thrust *= thrust_scale;
accel_body = Vector3f(lateral_x_thrust, lateral_y_thrust, -thrust / mass);
accel_body += dcm * air_resistance;
bool was_on_ground = on_ground(position);
update_dynamics(rot_accel);
// constrain height to the ground
if (on_ground(position) && !was_on_ground) {
// zero roll/pitch, but keep yaw
float r, p, y;
dcm.to_euler(&r, &p, &y);
dcm.from_euler(0, 0, y);
position.z = -(ground_level + frame_height - home.alt*0.01f);
velocity_ef.zero();
}
// update lat/lon/altitude
update_position();
}
} // namespace SITL