mirror of https://github.com/ArduPilot/ardupilot
160 lines
3.5 KiB
Plaintext
160 lines
3.5 KiB
Plaintext
# hw definition file for processing by chibios_hwdef.py
|
|
# for H743
|
|
|
|
# MCU class and specific type
|
|
MCU STM32H7xx STM32H743xx
|
|
|
|
env OPTIMIZE -O2
|
|
|
|
# USB setup
|
|
USB_STRING_MANUFACTURER "ArduPilot"
|
|
USB_STRING_PRODUCT "%BOARD%"
|
|
|
|
|
|
# crystal frequency
|
|
OSCILLATOR_HZ 25000000
|
|
|
|
|
|
FLASH_SIZE_KB 2048
|
|
|
|
# setup build for a peripheral firmware
|
|
env AP_PERIPH 1
|
|
|
|
define HAL_BUILD_AP_PERIPH
|
|
|
|
# bootloader is installed at zero offset
|
|
FLASH_RESERVE_START_KB 128
|
|
FLASH_BOOTLOADER_LOAD_KB 128
|
|
|
|
# reserve 256 bytes for comms between app and bootloader
|
|
RAM_RESERVE_START 256
|
|
|
|
MAIN_STACK 0x2000
|
|
PROCESS_STACK 0x6000
|
|
|
|
# board ID for firmware load
|
|
APJ_BOARD_ID 1315
|
|
|
|
PA13 JTMS-SWDIO SWD
|
|
PA14 JTCK-SWCLK SWD
|
|
|
|
###########################
|
|
|
|
# CAN setup
|
|
PB8 CAN1_RX CAN1
|
|
PB9 CAN1_TX CAN1
|
|
|
|
###########################
|
|
|
|
# UART 1 - Avionics
|
|
PA9 USART1_TX USART1
|
|
PA10 USART1_RX USART1
|
|
|
|
# UART 2 - Avionics
|
|
PD5 USART2_TX USART2
|
|
PD6 USART2_RX USART2
|
|
|
|
# UART 3 - unused, J2 (2 pin)
|
|
PC10 UART4_TX UART4
|
|
PC11 UART4_RX UART4
|
|
|
|
# UART 4 - debug console, J6 (4 pin)
|
|
PE7 UART7_RX UART7
|
|
PE8 UART7_TX UART7
|
|
|
|
# Now we define the pins that USB is connected on.
|
|
PA11 OTG_FS_DM OTG1
|
|
PA12 OTG_FS_DP OTG1
|
|
|
|
# order of UARTs (and USB)
|
|
SERIAL_ORDER OTG1 USART1 USART2
|
|
#SERIAL_ORDER OTG1 USART1 USART2 OTG2
|
|
#SERIAL_ORDER OTG1 USART1 USART2 UART4 UART7
|
|
#SERIAL_ORDER OTG1 USART1 USART2 UART4 UART7 OTG2
|
|
|
|
define AP_CAN_SLCAN_ENABLED 0
|
|
|
|
###########################
|
|
# storage
|
|
###########################
|
|
define HAL_STORAGE_SIZE 32768
|
|
STORAGE_FLASH_PAGE 14
|
|
###########################
|
|
|
|
|
|
# Ethernet
|
|
PC1 ETH_MDC ETH1
|
|
PA2 ETH_MDIO ETH1
|
|
PC4 ETH_RMII_RXD0 ETH1
|
|
PC5 ETH_RMII_RXD1 ETH1
|
|
PB12 ETH_RMII_TXD0 ETH1
|
|
PB13 ETH_RMII_TXD1 ETH1
|
|
PB11 ETH_RMII_TX_EN ETH1
|
|
PA7 ETH_RMII_CRS_DV ETH1
|
|
PA1 ETH_RMII_REF_CLK ETH1
|
|
|
|
PA15 GPIO_ETH_ENABLE INPUT FLOATING GPIO(113)
|
|
define HAL_GPIO_ETH_ENABLE 113
|
|
|
|
define BOARD_PHY_ID MII_LAN8742A_ID
|
|
define BOARD_PHY_RMII
|
|
define HAL_PERIPH_ENABLE_NETWORKING
|
|
|
|
###################
|
|
|
|
#Communications and debug
|
|
# use DNA
|
|
define HAL_CAN_DEFAULT_NODE_ID 0
|
|
#################################
|
|
|
|
# Multi-purpose pins like SPI, I2C, GPIO, PWMs, LEDs, ADC
|
|
|
|
I2C_ORDER I2C4
|
|
PD12 I2C4_SCL I2C4
|
|
PD13 I2C4_SDA I2C4
|
|
|
|
|
|
# LEDs
|
|
PE11 LED1 OUTPUT LOW GPIO(3)
|
|
PE12 LED2 OUTPUT LOW GPIO(4)
|
|
define HAL_GPIO_PIN_LED HAL_GPIO_PIN_LED1
|
|
#define HAL_GPIO_PIN_LED_CAN1 HAL_GPIO_PIN_LED2
|
|
define HAL_LED_ON 1
|
|
|
|
define HAL_USE_ADC FALSE
|
|
define STM32_ADC_USE_ADC1 FALSE
|
|
define HAL_DISABLE_ADC_DRIVER TRUE
|
|
|
|
#################################
|
|
|
|
|
|
# ---------------------------------------------------------------------------------------------
|
|
# AP_Periph - boiler-plate configurations that all HW AP-Periph need
|
|
# ---------------------------------------------------------------------------------------------
|
|
define DISABLE_SERIAL_ESC_COMM TRUE
|
|
define HAL_NO_RCIN_THREAD
|
|
#define HAL_NO_GPIO_IRQ
|
|
define HAL_DISABLE_LOOP_DELAY
|
|
|
|
|
|
define PERIPH_FW TRUE
|
|
#define NO_DATAFLASH TRUE
|
|
define HAL_LOGGING_ENABLED TRUE
|
|
|
|
#################################
|
|
# AP_Periph - configurations specific to this App
|
|
#################################
|
|
|
|
# listen for reboot command from uploader.py script
|
|
# undefine to disable. Use -1 to allow on all ports, otherwise serial number index defined in SERIAL_ORDER starting at 0
|
|
define HAL_PERIPH_LISTEN_FOR_SERIAL_UART_REBOOT_CMD_PORT 0
|
|
#################################
|
|
|
|
|
|
DMA_NOSHARE USART1* USART2* CAN1*
|
|
|
|
# bootloader embedding / bootloader flashing not available
|
|
define AP_BOOTLOADER_FLASHING_ENABLED 0
|
|
|
|
AUTOBUILD_TARGETS None
|