mirror of https://github.com/ArduPilot/ardupilot
260 lines
6.8 KiB
C++
260 lines
6.8 KiB
C++
/*
|
|
implement protocol for controlling an IO microcontroller
|
|
|
|
For bootstrapping this will initially implement the px4io protocol,
|
|
but will later move to an ArduPilot specific protocol
|
|
*/
|
|
|
|
#include <AP_HAL/AP_HAL.h>
|
|
|
|
#if HAL_WITH_IO_MCU
|
|
|
|
#include "ch.h"
|
|
#include "iofirmware/ioprotocol.h"
|
|
#include <AP_RCMapper/AP_RCMapper.h>
|
|
|
|
class AP_IOMCU {
|
|
public:
|
|
AP_IOMCU(AP_HAL::UARTDriver &uart);
|
|
|
|
void init(void);
|
|
|
|
// write to one channel
|
|
void write_channel(uint8_t chan, uint16_t pwm);
|
|
|
|
// read from one channel
|
|
uint16_t read_channel(uint8_t chan);
|
|
|
|
// cork output
|
|
void cork(void);
|
|
|
|
// push output
|
|
void push(void);
|
|
|
|
// set output frequency
|
|
void set_freq(uint16_t chmask, uint16_t freq);
|
|
|
|
// get output frequency
|
|
uint16_t get_freq(uint16_t chan);
|
|
|
|
// get state of safety switch
|
|
AP_HAL::Util::safety_state get_safety_switch_state(void) const;
|
|
|
|
// force safety on
|
|
bool force_safety_on(void);
|
|
|
|
// force safety off
|
|
void force_safety_off(void);
|
|
|
|
// set PWM of channels when safety is on
|
|
void set_safety_pwm(uint16_t chmask, uint16_t period_us);
|
|
|
|
// set mask of channels that ignore safety state
|
|
void set_safety_mask(uint16_t chmask);
|
|
|
|
// set PWM of channels when in FMU failsafe
|
|
void set_failsafe_pwm(uint16_t chmask, uint16_t period_us);
|
|
|
|
/*
|
|
enable sbus output
|
|
*/
|
|
bool enable_sbus_out(uint16_t rate_hz);
|
|
|
|
/*
|
|
check for new RC input
|
|
*/
|
|
bool check_rcinput(uint32_t &last_frame_us, uint8_t &num_channels, uint16_t *channels, uint8_t max_channels);
|
|
|
|
// Do DSM receiver binding
|
|
void bind_dsm(uint8_t mode);
|
|
|
|
// get the name of the RC protocol
|
|
const char *get_rc_protocol(void);
|
|
|
|
/*
|
|
get servo rail voltage
|
|
*/
|
|
float get_vservo(void) const { return reg_status.vservo * 0.001; }
|
|
|
|
/*
|
|
get rssi voltage
|
|
*/
|
|
float get_vrssi(void) const { return reg_status.vrssi * 0.001; }
|
|
|
|
// set target for IMU heater
|
|
void set_heater_duty_cycle(uint8_t duty_cycle);
|
|
|
|
// set default output rate
|
|
void set_default_rate(uint16_t rate_hz);
|
|
|
|
// set to oneshot mode
|
|
void set_oneshot_mode(void);
|
|
|
|
// check if IO is healthy
|
|
bool healthy(void);
|
|
|
|
// shutdown IO protocol (for reboot)
|
|
void shutdown();
|
|
|
|
// setup for FMU failsafe mixing
|
|
bool setup_mixing(RCMapper *rcmap, int8_t override_chan,
|
|
float mixing_gain, uint16_t manual_rc_mask);
|
|
|
|
private:
|
|
AP_HAL::UARTDriver &uart;
|
|
|
|
void thread_main(void);
|
|
|
|
// read count 16 bit registers
|
|
bool read_registers(uint8_t page, uint8_t offset, uint8_t count, uint16_t *regs);
|
|
|
|
// write count 16 bit registers
|
|
bool write_registers(uint8_t page, uint8_t offset, uint8_t count, const uint16_t *regs);
|
|
|
|
// write a single register
|
|
bool write_register(uint8_t page, uint8_t offset, uint16_t v) {
|
|
return write_registers(page, offset, 1, &v);
|
|
}
|
|
|
|
// modify a single register
|
|
bool modify_register(uint8_t page, uint8_t offset, uint16_t clearbits, uint16_t setbits);
|
|
|
|
// trigger an ioevent
|
|
void trigger_event(uint8_t event);
|
|
|
|
// IOMCU thread
|
|
thread_t *thread_ctx;
|
|
|
|
eventmask_t initial_event_mask;
|
|
|
|
// time when we last read various pages
|
|
uint32_t last_status_read_ms;
|
|
uint32_t last_rc_read_ms;
|
|
uint32_t last_servo_read_ms;
|
|
uint32_t last_debug_ms;
|
|
uint32_t last_safety_option_check_ms;
|
|
|
|
// last value of safety options
|
|
uint16_t last_safety_options = 0xFFFF;
|
|
|
|
// have we forced the safety off?
|
|
bool safety_forced_off;
|
|
|
|
void send_servo_out(void);
|
|
void read_rc_input(void);
|
|
void read_servo(void);
|
|
void read_status(void);
|
|
void print_debug(void);
|
|
void discard_input(void);
|
|
void event_failed(uint8_t event);
|
|
void update_safety_options(void);
|
|
|
|
// CONFIG page
|
|
struct page_config config;
|
|
|
|
// PAGE_STATUS values
|
|
struct page_reg_status reg_status;
|
|
|
|
// PAGE_RAW_RCIN values
|
|
struct page_rc_input rc_input;
|
|
|
|
// MIXER values
|
|
struct page_mixing mixing;
|
|
|
|
// output pwm values
|
|
struct {
|
|
uint8_t num_channels;
|
|
uint16_t pwm[IOMCU_MAX_CHANNELS];
|
|
uint8_t safety_pwm_set;
|
|
uint8_t safety_pwm_sent;
|
|
uint16_t safety_pwm[IOMCU_MAX_CHANNELS];
|
|
uint16_t safety_mask;
|
|
uint16_t failsafe_pwm[IOMCU_MAX_CHANNELS];
|
|
uint8_t failsafe_pwm_set;
|
|
uint8_t failsafe_pwm_sent;
|
|
} pwm_out;
|
|
|
|
// read back pwm values
|
|
struct {
|
|
uint16_t pwm[IOMCU_MAX_CHANNELS];
|
|
} pwm_in;
|
|
|
|
// output rates
|
|
struct {
|
|
uint16_t freq;
|
|
uint16_t chmask;
|
|
uint16_t default_freq = 50;
|
|
uint16_t sbus_rate_hz;
|
|
} rate;
|
|
|
|
// IMU heater duty cycle
|
|
uint8_t heater_duty_cycle;
|
|
|
|
uint32_t last_servo_out_us;
|
|
|
|
bool corked;
|
|
bool do_shutdown;
|
|
bool done_shutdown;
|
|
|
|
bool crc_is_ok;
|
|
bool initialised;
|
|
bool is_chibios_backend;
|
|
|
|
uint32_t protocol_fail_count;
|
|
|
|
// firmware upload
|
|
const char *fw_name = "io_firmware.bin";
|
|
uint8_t *fw;
|
|
uint32_t fw_size;
|
|
|
|
bool upload_fw(void);
|
|
bool recv_byte_with_timeout(uint8_t *c, uint32_t timeout_ms);
|
|
bool recv_bytes(uint8_t *p, uint32_t count);
|
|
void drain(void);
|
|
bool send(uint8_t c);
|
|
bool send(const uint8_t *p, uint32_t count);
|
|
bool get_sync(uint32_t timeout = 40);
|
|
bool sync();
|
|
bool get_info(uint8_t param, uint32_t &val);
|
|
bool erase();
|
|
bool program(uint32_t fw_size);
|
|
bool verify_rev2(uint32_t fw_size);
|
|
bool verify_rev3(uint32_t fw_size_local);
|
|
bool reboot();
|
|
|
|
bool check_crc(void);
|
|
|
|
enum {
|
|
PROTO_NOP = 0x00,
|
|
PROTO_OK = 0x10,
|
|
PROTO_FAILED = 0x11,
|
|
PROTO_INSYNC = 0x12,
|
|
PROTO_INVALID = 0x13,
|
|
PROTO_BAD_SILICON_REV = 0x14,
|
|
PROTO_EOC = 0x20,
|
|
PROTO_GET_SYNC = 0x21,
|
|
PROTO_GET_DEVICE = 0x22,
|
|
PROTO_CHIP_ERASE = 0x23,
|
|
PROTO_CHIP_VERIFY = 0x24,
|
|
PROTO_PROG_MULTI = 0x27,
|
|
PROTO_READ_MULTI = 0x28,
|
|
PROTO_GET_CRC = 0x29,
|
|
PROTO_GET_OTP = 0x2a,
|
|
PROTO_GET_SN = 0x2b,
|
|
PROTO_GET_CHIP = 0x2c,
|
|
PROTO_SET_DELAY = 0x2d,
|
|
PROTO_GET_CHIP_DES = 0x2e,
|
|
PROTO_REBOOT = 0x30,
|
|
|
|
INFO_BL_REV = 1, /**< bootloader protocol revision */
|
|
BL_REV = 5, /**< supported bootloader protocol */
|
|
INFO_BOARD_ID = 2, /**< board type */
|
|
INFO_BOARD_REV = 3, /**< board revision */
|
|
INFO_FLASH_SIZE = 4, /**< max firmware size in bytes */
|
|
|
|
PROG_MULTI_MAX = 248, /**< protocol max is 255, must be multiple of 4 */
|
|
};
|
|
};
|
|
|
|
#endif // HAL_WITH_IO_MCU
|