.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: simplify APM_Config after removing APM1,2 support
|
2015-03-13 16:41:05 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: convert to new GPS API
|
2014-04-01 06:38:24 +11:00 |
AP_State.pde
|
Copter: remove GPS glitch and failsafe
|
2015-03-13 16:40:46 +09:00 |
ArduCopter.pde
|
Copter: version to APM:Copter 3.3-rc1
|
2015-04-12 09:21:44 +09:00 |
Attitude.pde
|
Copter: get_pilot_desired_lean_angles uses angle_max of at least 10deg
|
2015-03-11 22:24:44 +09:00 |
GCS_Mavlink.pde
|
Copter: pre-arm check primary compass health
|
2015-04-10 11:08:18 +09:00 |
Log.pde
|
Copter: rename MOT df msg to MOTB
|
2015-03-18 21:25:45 +09:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: remove dcm check
|
2015-03-27 00:04:37 -07:00 |
Parameters.pde
|
Copter: RATE_RLL_P param def max to 0.30
|
2015-04-09 20:19:57 +09:00 |
ReleaseNotes.txt
|
Copter: update 3.3-rc1 release notes
|
2015-04-12 09:41:23 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
commands.pde
|
Copter: only log home when first set
|
2015-04-09 10:57:08 +09:00 |
commands_logic.pde
|
Copter: handle do_mount_control mission commands
|
2015-03-21 21:52:24 +09:00 |
compassmot.pde
|
Copter: remove GPS glitch and failsafe
|
2015-03-13 16:40:46 +09:00 |
compat.h
|
Copter: remove unused HIGH, LOW definitions
|
2014-05-09 16:35:21 +09:00 |
compat.pde
|
Copter: reduced build warnings
|
2015-02-18 11:13:48 +11:00 |
config.h
|
Copter: roll, pitch rate IMAX to 2000
|
2015-04-09 20:19:56 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_acro.pde
|
Copter: minor rename of ACRO circular limits variable
|
2014-11-10 18:36:17 -08:00 |
control_althold.pde
|
Copter: interpret input in stabilize as a tilt vector
|
2015-03-11 22:24:42 +09:00 |
control_auto.pde
|
Copter: fence, rtl, land use alt-above-home
|
2015-02-12 15:08:00 +09:00 |
control_autotune.pde
|
Copter: Adjust Autotune backoff of accel
|
2015-03-27 06:24:53 -07:00 |
control_circle.pde
|
Copter: remove redundant filter status checks
|
2015-01-22 14:39:57 +09:00 |
control_drift.pde
|
Copter: remove THR_MAX parameter
|
2015-03-16 14:49:34 +09:00 |
control_flip.pde
|
Copter: Change Aux Switch function list to enum.
|
2015-03-17 21:18:46 +09:00 |
control_guided.pde
|
Copter: rename xy_mode
|
2015-02-06 17:00:58 +09:00 |
control_land.pde
|
Copter: interpret input in stabilize as a tilt vector
|
2015-03-11 22:24:42 +09:00 |
control_loiter.pde
|
Copter: remove home_is_set checks from Loiter, PosHold, RTL
|
2015-01-22 14:40:19 +09:00 |
control_poshold.pde
|
Copter: interpret input in stabilize as a tilt vector
|
2015-03-11 22:24:42 +09:00 |
control_rtl.pde
|
Copter: fence, rtl, land use alt-above-home
|
2015-02-12 15:08:00 +09:00 |
control_sport.pde
|
Copter: reset target alt to current alt when landed
|
2014-08-04 16:56:03 +09:00 |
control_stabilize.pde
|
Copter: interpret input in stabilize as a tilt vector
|
2015-03-11 22:24:42 +09:00 |
crash_check.pde
|
Copter: fixed some build warnings
|
2014-10-16 14:04:11 +09:00 |
defines.h
|
Copter: fix bitmask for use with SET_POSITION_TARGET
|
2015-04-11 11:57:41 +09:00 |
ekf_check.pde
|
Copter: ekf_check ok if optflow pos available
|
2015-04-10 11:08:21 +09:00 |
esc_calibration.pde
|
Copter: increased ESC auto-cal delay
|
2015-02-03 11:33:54 +09:00 |
events.pde
|
Copter: remove GPS glitch and failsafe
|
2015-03-13 16:40:46 +09:00 |
failsafe.pde
|
Copter: CPU failsafe set motors to min before logging error
|
2014-11-08 11:37:23 +09:00 |
fence.pde
|
Copter: rename manual_flight_mode to mode_has_manual_throttle
|
2015-02-02 22:31:01 +09:00 |
flight_mode.pde
|
Copter: set Notify's autopilot_mode flag
|
2015-03-06 17:26:49 +09:00 |
heli.h
|
TradHeli: Move two static bools into heli_flags structure to save 2 bytes RAM.
|
2014-07-13 17:11:30 +09:00 |
heli.pde
|
Copter: replace GPS_ok with position_ok
|
2015-01-22 14:39:45 +09:00 |
heli_control_acro.pde
|
TradHeli: call passthrough_bf_roll_pitch_rate_yaw
|
2014-08-22 16:29:00 +09:00 |
heli_control_stabilize.pde
|
Copter: interpret input in stabilize as a tilt vector
|
2015-03-11 22:24:42 +09:00 |
inertia.pde
|
Copter: update inertial alt only after home is set
|
2015-04-09 10:57:04 +09:00 |
land_detector.pde
|
Copter: add update_throttle_low_comp
|
2015-03-10 12:20:24 +09:00 |
landing_gear.pde
|
Copter: Create check_if_auxsw_mode_used() to check for function usage
|
2015-03-17 21:18:47 +09:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motor_test.pde
|
Copter: remove GPS glitch and failsafe
|
2015-03-13 16:40:46 +09:00 |
motors.pde
|
Copter: pre-arm check primary compass health
|
2015-04-10 11:08:18 +09:00 |
navigation.pde
|
Copter: always update current_loc regardless of inav state
|
2015-02-12 15:00:56 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
Copter: make PERF info message into a STATUSTEXT message
|
2015-02-16 10:02:53 +11:00 |
position_vector.pde
|
Copter: functions to convert alt-above-home vs alt-above-origin
|
2015-02-12 15:01:05 +09:00 |
radio.pde
|
Copter: remove THR_MAX parameter
|
2015-03-16 14:49:34 +09:00 |
readme.txt
|
Copter: readme file renamed and directs to wiki
|
2014-02-12 21:03:45 +09:00 |
sensors.pde
|
Copter: remove baro_glitch protection
|
2015-03-13 16:40:27 +09:00 |
setup.pde
|
Copter: Update compass to the new interface
|
2015-03-13 18:46:16 +11:00 |
switches.pde
|
Copter: fix compiler error re ch9, ch12 on some boards
|
2015-03-17 22:16:48 +09:00 |
system.pde
|
Copter: integrate Serial Manager instance
|
2015-04-01 14:59:25 -07:00 |
test.pde
|
Copter: reduced build warnings
|
2015-02-18 11:13:48 +11:00 |
tuning.pde
|
Copter: rename loiter_pos to pos_xy
|
2015-03-06 14:02:17 +09:00 |