ardupilot/libraries/AP_Airspeed
Andrew Tridgell 8066478679 AP_Airspeed: fixed airspeed cal on 2nd airspeed sensor
we need to use the pressure from the sensor we are calibrating
2022-05-28 16:08:08 +09:00
..
examples/Airspeed AP_Airspeed: add AP_AIRSPEED_ENABLED 2022-01-19 18:21:32 +11:00
models AP_Airspeed: remove duplicated words from comments 2022-02-07 08:24:14 +09:00
AP_Airspeed.cpp AP_Airspeed: remove negative pressure set unhealthy 2022-05-28 16:08:08 +09:00
AP_Airspeed.h AP_Airspeed: rename get_health_failure_probability to get_health_probability 2022-03-12 08:01:18 +09:00
AP_Airspeed_ASP5033.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_ASP5033.h AP_Airspeed: added ASP5033 driver 2021-03-28 07:50:34 +11:00
AP_Airspeed_Backend.cpp AP_Airspeed: support 3 I2C addresses for MS4525 2021-07-12 17:14:59 +10:00
AP_Airspeed_Backend.h AP_Airspeed: added ARSPD_OPTIONS bit for disabling voltage correction 2021-07-12 17:14:59 +10:00
AP_Airspeed_DLVR.cpp AP_Airspeed: Sanity check DLVR raw data before accumulating it 2022-02-09 09:00:22 +11:00
AP_Airspeed_DLVR.h AP_Airspeed: allow for an AIRSPEED list in hwdef.dat 2021-09-21 13:51:40 +10:00
AP_Airspeed_Health.cpp AP_Airspeed: Health: use reading from correct airspeed sensor 2022-03-12 08:01:18 +09:00
AP_Airspeed_MS4525.cpp AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
AP_Airspeed_MS4525.h AP_Airspeed: support 3 I2C addresses for MS4525 2021-07-12 17:14:59 +10:00
AP_Airspeed_MS5525.cpp AP_Airspeed: make MAV_SEVERITY levels higher 2021-11-03 18:06:48 -07:00
AP_Airspeed_MS5525.h AP_Airspeed: removed #include duplicates 2019-01-03 09:40:50 +09:00
AP_Airspeed_MSP.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_MSP.h AP_Airspeed: added MSP backend 2020-12-08 20:41:12 +11:00
AP_Airspeed_NMEA.cpp AP_Airspeed: added DEVID parameters for airspeed 2021-07-12 17:14:59 +10:00
AP_Airspeed_NMEA.h AP_Airspeed: add NMEA water speed backend 2020-10-27 11:24:49 +11:00
AP_Airspeed_SDP3X.cpp AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C 2022-01-13 18:31:46 +11:00
AP_Airspeed_SDP3X.h AP_Airspeed: remove size warning on SDP3X crc function. 2020-10-14 07:52:02 +11:00
AP_Airspeed_UAVCAN.cpp AP_Airspeed: make C_TO_KELVIN a function macro; create KELVIN_TO_C 2022-01-13 18:31:46 +11:00
AP_Airspeed_UAVCAN.h AP_Airspeed: enable for use in AP_Periph 2019-10-21 19:12:01 +11:00
AP_Airspeed_analog.cpp AP_Airspeed: analog: check valid pin 2021-10-06 18:42:51 +11:00
AP_Airspeed_analog.h AP_Airspeed: support dual airspeed sensors 2018-01-16 07:14:20 +11:00
Airspeed_Calibration.cpp AP_Airspeed: fixed airspeed cal on 2nd airspeed sensor 2022-05-28 16:08:08 +09:00