mirror of https://github.com/ArduPilot/ardupilot
44 lines
1.0 KiB
Markdown
44 lines
1.0 KiB
Markdown
# CAN Peripheral Firmware
|
|
|
|
This is an ArduPilot based CAN peripheral firmware. Currently two
|
|
targets are supported:
|
|
|
|
- A STM32F103 128k flash part made by mRobotics (target f103-periph)
|
|
- A STM32F412 512k flash part made by CUAV (target CUAV_GPS)
|
|
|
|
# Building
|
|
|
|
Using f103-periph as an example, build the main firmware like this:
|
|
|
|
- ./waf configure --board f103-periph
|
|
- ./waf AP_Periph
|
|
|
|
that will build a file build/f103-periph/bin/AP_Periph.bin. You can
|
|
now load that using the CAN bootloader and either uavcan_gui_tool or
|
|
MissionPlanner.
|
|
|
|
# Flashing
|
|
|
|
To load directly with a stlink-v2, do this:
|
|
|
|
- st-flash write build/f103-periph/bin/AP_Periph.bin 0x8006000
|
|
|
|
for the CUAV_GPS which loads at offset 0x10000 use this:
|
|
|
|
- st-flash write build/CUAV_GPS/bin/AP_Periph.bin 0x8010000
|
|
|
|
# Flashing bootloader
|
|
|
|
To flash the bootloader use this:
|
|
|
|
- st-flash write Tools/bootloaders/f103-periph_bl.bin 0x8000000
|
|
|
|
# Building bootloader
|
|
|
|
To build the bootloader use this:
|
|
|
|
- Tools/scripts/build_bootloader.py f103-periph
|
|
|
|
the resulting bootloader will be in Tools/bootloaders
|
|
|