ardupilot/libraries/AP_HAL_ChibiOS/hwdef/crazyflie2/hwdef-bl.dat

43 lines
763 B
Plaintext

# hw definition file for processing by chibios_pins.py
# for crazyflie2.0
# MCU class and specific type
MCU STM32F4xx STM32F405xx
# board ID for firmware load
APJ_BOARD_ID 12
# crystal frequency
OSCILLATOR_HZ 8000000
define STM32_ST_USE_TIMER 5
FLASH_SIZE_KB 1024
# don't allow bootloader to use more than 16k
FLASH_USE_MAX_KB 16
# bootloader is installed at zero offset
FLASH_RESERVE_START_KB 0
# LEDs
PD2 LED_BOOTLOADER OUTPUT HIGH
PC0 LED_ACTIVITY OUTPUT HIGH
define HAL_LED_ON 0
# the location where the bootloader will put the firmware
FLASH_BOOTLOADER_LOAD_KB 64
# order of UARTs
SERIAL_ORDER OTG1
PA11 OTG_FS_DM OTG1
PA12 OTG_FS_DP OTG1
# Add CS pins to ensure they are high in bootloader
PC12 E_CS0 CS
PB4 E_CS1 CS
PB5 E_CS2 CS
PB8 E_CS3 CS