.. |
APM_Config.h
|
Rover: major restructuring
|
2013-02-08 09:21:22 +11:00 |
APMrover2.pde
|
Rover: change to new board_voltage() API
|
2014-02-14 21:50:59 +11:00 |
GCS_Mavlink.pde
|
Rover: log power status on Pixhawk
|
2014-02-15 05:00:09 +11:00 |
Log.pde
|
Rover: log power status on Pixhawk
|
2014-02-15 05:00:09 +11:00 |
Makefile
|
Rover Makefile: don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:53 -08:00 |
Parameters.h
|
Rover: enable AP_BoardConfig
|
2014-01-20 17:06:28 +11:00 |
Parameters.pde
|
Rover: check param table on startup
|
2014-01-31 13:10:15 +11:00 |
Steering.pde
|
Rover: removed unused code
|
2014-02-04 21:43:47 +11:00 |
command_description.txt
|
APMrover v2.0 - tested on Traxxas Monster Jam Grinder XL-5 3602
|
2012-04-30 09:17:14 +02:00 |
commands.pde
|
Rover: use L1 controller for navigation
|
2013-09-09 18:04:40 +10:00 |
commands_logic.pde
|
Rover: converted to AP_ServoRelayEvents
|
2014-01-20 17:06:29 +11:00 |
commands_process.pde
|
Rover: first cut at porting rover to AP_HAL
|
2012-12-20 14:52:34 +11:00 |
compat.h
|
Rover: first cut at porting rover to AP_HAL
|
2012-12-20 14:52:34 +11:00 |
compat.pde
|
Rover: remove some unused functions
|
2013-10-11 21:36:50 +11:00 |
config.h
|
Rover: added RC in/out logging
|
2013-12-30 10:24:01 +11:00 |
control_modes.pde
|
Rover: use L1 controller for navigation
|
2013-09-09 18:04:40 +10:00 |
createTags
|
APMrover v2.0 - tested on Traxxas Monster Jam Grinder XL-5 3602
|
2012-04-30 09:17:14 +02:00 |
defines.h
|
Rover: changed LOG_WHEN_DISARMED to 1<<16
|
2014-02-15 05:12:48 +11:00 |
events.pde
|
Rover: converted to AP_ServoRelayEvents
|
2014-01-20 17:06:29 +11:00 |
failsafe.pde
|
Rover: removed demo_servos()
|
2013-10-23 09:40:41 +11:00 |
navigation.pde
|
Rover: use L1 controller for navigation
|
2013-09-09 18:04:40 +10:00 |
nocore.inoflag
|
Rover: added nocore.inoflag
|
2012-12-20 14:52:35 +11:00 |
radio.pde
|
Rover: check for failed RC input
|
2013-12-20 09:48:36 +11:00 |
sensors.pde
|
Rover: integrate BattMonitor
|
2013-10-03 11:16:29 +09:00 |
setup.pde
|
Rover: replace APM with board in cli
|
2013-12-28 10:42:22 +09:00 |
system.pde
|
Rover: change to new board_voltage() API
|
2014-02-14 21:50:59 +11:00 |
test.pde
|
Rover: fixes for AP_Relay API change
|
2014-01-20 17:06:29 +11:00 |