ardupilot/ArduSub/tuning.cpp

#include "Sub.h"
#if CH6_TUNE_ENABLED == ENABLED

/*
 * tuning.pde - function to update various parameters in flight using the ch6 tuning knob
 */

// tuning - updates parameters based on the ch6 tuning knob's position
//  should be called at 3.3hz
void Sub::tuning()
{

    // exit immediately if not tuning of when radio failsafe is invoked so tuning values are not set to zero
    if ((g.radio_tuning <= 0) || failsafe.manual_control) {
        return;
    }

    float tuning_value = (float)g.rc_6.get_control_in() / 1000.0f;
    g.rc_6.set_range(g.radio_tuning_low,g.radio_tuning_high);

    Log_Write_Parameter_Tuning(g.radio_tuning, tuning_value, g.rc_6.get_control_in(), g.radio_tuning_low, g.radio_tuning_high);

    switch (g.radio_tuning) {

        // Roll, Pitch tuning
    case TUNING_STABILIZE_ROLL_PITCH_KP:
        attitude_control.get_angle_roll_p().kP(tuning_value);
        attitude_control.get_angle_pitch_p().kP(tuning_value);
        break;

    case TUNING_RATE_ROLL_PITCH_KP:
        attitude_control.get_rate_roll_pid().kP(tuning_value);
        attitude_control.get_rate_pitch_pid().kP(tuning_value);
        break;

    case TUNING_RATE_ROLL_PITCH_KI:
        attitude_control.get_rate_roll_pid().kI(tuning_value);
        attitude_control.get_rate_pitch_pid().kI(tuning_value);
        break;

    case TUNING_RATE_ROLL_PITCH_KD:
        attitude_control.get_rate_roll_pid().kD(tuning_value);
        attitude_control.get_rate_pitch_pid().kD(tuning_value);
        break;

        // Yaw tuning
    case TUNING_STABILIZE_YAW_KP:
        attitude_control.get_angle_yaw_p().kP(tuning_value);
        break;

    case TUNING_YAW_RATE_KP:
        attitude_control.get_rate_yaw_pid().kP(tuning_value);
        break;

    case TUNING_YAW_RATE_KD:
        attitude_control.get_rate_yaw_pid().kD(tuning_value);
        break;

        // Altitude and throttle tuning
    case TUNING_ALTITUDE_HOLD_KP:
        g.p_alt_hold.kP(tuning_value);
        break;

    case TUNING_THROTTLE_RATE_KP:
        g.p_vel_z.kP(tuning_value);
        break;

    case TUNING_ACCEL_Z_KP:
        g.pid_accel_z.kP(tuning_value);
        break;

    case TUNING_ACCEL_Z_KI:
        g.pid_accel_z.kI(tuning_value);
        break;

    case TUNING_ACCEL_Z_KD:
        g.pid_accel_z.kD(tuning_value);
        break;

        // Loiter and navigation tuning
    case TUNING_LOITER_POSITION_KP:
        g.p_pos_xy.kP(tuning_value);
        break;

    case TUNING_VEL_XY_KP:
        g.pi_vel_xy.kP(tuning_value);
        break;

    case TUNING_VEL_XY_KI:
        g.pi_vel_xy.kI(tuning_value);
        break;

    case TUNING_WP_SPEED:
        // set waypoint navigation horizontal speed to 0 ~ 1000 cm/s
        wp_nav.set_speed_xy(g.rc_6.get_control_in());
        break;

        // Acro roll pitch gain
    case TUNING_ACRO_RP_KP:
        g.acro_rp_p = tuning_value;
        break;

        // Acro yaw gain
    case TUNING_ACRO_YAW_KP:
        g.acro_yaw_p = tuning_value;
        break;

    case TUNING_DECLINATION:
        // set declination to +-20degrees
        compass.set_declination(ToRad((2.0f * g.rc_6.get_control_in() - g.radio_tuning_high)/100.0f), false);     // 2nd parameter is false because we do not want to save to eeprom because this would have a performance impact
        break;

    case TUNING_CIRCLE_RATE:
        // set circle rate up to approximately 45 deg/sec in either direction
        circle_nav.set_rate((float)g.rc_6.get_control_in()/25.0f-20.0f);
        break;

    case TUNING_RANGEFINDER_GAIN:
        // set rangefinder gain
        g.rangefinder_gain.set(tuning_value);
        break;

#if 0
        // disabled for now - we need accessor functions
    case TUNING_EKF_VERTICAL_POS:
        // Tune the EKF that is being used
        // EKF's baro vs accel (higher rely on accels more, baro impact is reduced)
        if (!ahrs.get_NavEKF2().enabled()) {
            ahrs.get_NavEKF()._gpsVertPosNoise = tuning_value;
        } else {
            ahrs.get_NavEKF2()._gpsVertPosNoise = tuning_value;
        }
        break;

    case TUNING_EKF_HORIZONTAL_POS:
        // EKF's gps vs accel (higher rely on accels more, gps impact is reduced)
        if (!ahrs.get_NavEKF2().enabled()) {
            ahrs.get_NavEKF()._gpsHorizPosNoise = tuning_value;
        } else {
            ahrs.get_NavEKF2()._gpsHorizPosNoise = tuning_value;
        }
        break;

    case TUNING_EKF_ACCEL_NOISE:
        // EKF's accel noise (lower means trust accels more, gps & baro less)
        if (!ahrs.get_NavEKF2().enabled()) {
            ahrs.get_NavEKF()._accNoise = tuning_value;
        } else {
            ahrs.get_NavEKF2()._accNoise = tuning_value;
        }
        break;
#endif

    case TUNING_RC_FEEL_RP:
        // roll-pitch input smoothing
        g.rc_feel_rp = g.rc_6.get_control_in() / 10;
        break;

    case TUNING_RATE_PITCH_KP:
        attitude_control.get_rate_pitch_pid().kP(tuning_value);
        break;

    case TUNING_RATE_PITCH_KI:
        attitude_control.get_rate_pitch_pid().kI(tuning_value);
        break;

    case TUNING_RATE_PITCH_KD:
        attitude_control.get_rate_pitch_pid().kD(tuning_value);
        break;

    case TUNING_RATE_ROLL_KP:
        attitude_control.get_rate_roll_pid().kP(tuning_value);
        break;

    case TUNING_RATE_ROLL_KI:
        attitude_control.get_rate_roll_pid().kI(tuning_value);
        break;

    case TUNING_RATE_ROLL_KD:
        attitude_control.get_rate_roll_pid().kD(tuning_value);
        break;

    case TUNING_RATE_MOT_YAW_HEADROOM:
        motors.set_yaw_headroom(tuning_value*1000);
        break;

    case TUNING_RATE_YAW_FILT:
        attitude_control.get_rate_yaw_pid().filt_hz(tuning_value);
        break;
    }
}
#endif