ardupilot/ArduSub/events.cpp

#include "Sub.h"

void Sub::failsafe_battery_event(void)
{
    //    // return immediately if low battery event has already been triggered
    //    if (failsafe.battery) {
    //        return;
    //    }
    //
    //    // failsafe check
    //  if (g.failsafe_battery_enabled != FS_BATT_DISABLED && motors.armed()) {
    //      if (should_disarm_on_failsafe()) {
    //          init_disarm_motors();
    //      } else {
    //          if (g.failsafe_battery_enabled == FS_BATT_RTL || control_mode == AUTO) {
    //              set_mode_RTL_or_land_with_pause(MODE_REASON_BATTERY_FAILSAFE);
    //          } else {
    //              set_mode_land_with_pause(MODE_REASON_BATTERY_FAILSAFE);
    //          }
    //      }
    //  }
    //
    //    // set the low battery flag
    //    set_failsafe_battery(true);
    //
    //    // warn the ground station and log to dataflash
    //    gcs_send_text(MAV_SEVERITY_WARNING,"Low battery");
    //    Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_BATT, ERROR_CODE_FAILSAFE_OCCURRED);

}

void Sub::failsafe_manual_control_check()
{
#if CONFIG_HAL_BOARD != HAL_BOARD_SITL
    uint32_t tnow = AP_HAL::millis();

    // Require at least 2Hz update
    if (tnow > failsafe.last_manual_control_ms + 500) {
        if (!failsafe.manual_control) {
            failsafe.manual_control = true;
            set_neutral_controls();
            init_disarm_motors();
            Log_Write_Error(ERROR_SUBSYSTEM_INPUT, ERROR_CODE_FAILSAFE_OCCURRED);
            gcs_send_text(MAV_SEVERITY_CRITICAL, "Lost manual control");
        }
        return;
    }

    failsafe.manual_control = false;
#endif
}

void Sub::failsafe_internal_pressure_check()
{

    if (g.failsafe_pressure == FS_PRESS_DISABLED) {
        return; // Nothing to do
    }

    uint32_t tnow = AP_HAL::millis();
    static uint32_t last_pressure_warn_ms;
    static uint32_t last_pressure_good_ms;
    if (barometer.get_pressure(0) < g.failsafe_pressure_max) {
        last_pressure_good_ms = tnow;
        last_pressure_warn_ms = tnow;
        failsafe.internal_pressure = false;
        return;
    }

    // 2 seconds with no readings below threshold triggers failsafe
    if (tnow > last_pressure_good_ms + 2000) {
        failsafe.internal_pressure = true;
    }

    // Warn every 30 seconds
    if (failsafe.internal_pressure && tnow > last_pressure_warn_ms + 30000) {
        last_pressure_warn_ms = tnow;
        gcs_send_text(MAV_SEVERITY_WARNING, "Internal pressure critical!");
    }
}

void Sub::failsafe_internal_temperature_check()
{

    if (g.failsafe_temperature == FS_TEMP_DISABLED) {
        return; // Nothing to do
    }

    uint32_t tnow = AP_HAL::millis();
    static uint32_t last_temperature_warn_ms;
    static uint32_t last_temperature_good_ms;
    if (barometer.get_temperature(0) < g.failsafe_temperature_max) {
        last_temperature_good_ms = tnow;
        last_temperature_warn_ms = tnow;
        failsafe.internal_temperature = false;
        return;
    }

    // 2 seconds with no readings below threshold triggers failsafe
    if (tnow > last_temperature_good_ms + 2000) {
        failsafe.internal_temperature = true;
    }

    // Warn every 30 seconds
    if (failsafe.internal_temperature && tnow > last_temperature_warn_ms + 30000) {
        last_temperature_warn_ms = tnow;
        gcs_send_text(MAV_SEVERITY_WARNING, "Internal temperature critical!");
    }
}

void Sub::set_leak_status(bool status)
{
    AP_Notify::flags.leak_detected = status;

    // Do nothing if we are dry, or if leak failsafe action is disabled
    if (status == false || g.failsafe_leak == FS_LEAK_DISABLED) {
        if (failsafe.leak) {
            Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_LEAK, ERROR_CODE_FAILSAFE_RESOLVED);
        }
        failsafe.leak = false;
        return;
    }

    uint32_t tnow = AP_HAL::millis();

    // We have a leak
    // Always send a warning every 20 seconds
    if (tnow > failsafe.last_leak_warn_ms + 20000) {
        failsafe.last_leak_warn_ms = tnow;
        gcs_send_text(MAV_SEVERITY_CRITICAL, "Leak Detected");
    }

    // Do nothing if we have already triggered the failsafe action, or if the motors are disarmed
    if (failsafe.leak) {
        return;
    }

    failsafe.leak = true;

    Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_LEAK, ERROR_CODE_FAILSAFE_OCCURRED);

    // Handle failsafe action
    if (failsafe.leak && g.failsafe_leak == FS_LEAK_SURFACE && motors.armed()) {
        set_mode(SURFACE, MODE_REASON_LEAK_FAILSAFE);
    }
}

// failsafe_gcs_check - check for ground station failsafe
void Sub::failsafe_gcs_check()
{
    // return immediately if we have never had contact with a gcs, or if gcs failsafe action is disabled
    // this also checks to see if we have a GCS failsafe active, if we do, then must continue to process the logic for recovery from this state.
    if (failsafe.last_heartbeat_ms == 0 || (!g.failsafe_gcs && g.failsafe_gcs == FS_GCS_DISABLED)) {
        return;
    }

    uint32_t tnow = AP_HAL::millis();

    // Check if we have gotten a GCS heartbeat recently (GCS sysid must match SYSID_MYGCS parameter)
    if (tnow < failsafe.last_heartbeat_ms + FS_GCS_TIMEOUT_MS) {
        // Log event if we are recovering from previous gcs failsafe
        if (failsafe.gcs) {
            Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_RESOLVED);
        }
        failsafe.gcs = false;
        return;
    }

    //////////////////////////////
    // GCS heartbeat has timed out
    //////////////////////////////

    // Send a warning every 30 seconds
    if (tnow > failsafe.last_gcs_warn_ms + 30000) {
        failsafe.last_gcs_warn_ms = tnow;
        gcs_send_text_fmt(MAV_SEVERITY_WARNING, "MYGCS: %d, heartbeat lost", g.sysid_my_gcs);
    }

    // do nothing if we have already triggered the failsafe action, or if the motors are disarmed
    if (failsafe.gcs || !motors.armed()) {
        return;
    }

    // update state, log to dataflash
    failsafe.gcs = true;
    Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_OCCURRED);

    // handle failsafe action
    if (g.failsafe_gcs == FS_GCS_DISARM) {
        init_disarm_motors();
    } else if (g.failsafe_gcs == FS_GCS_HOLD && motors.armed()) {
        set_mode(ALT_HOLD, MODE_REASON_GCS_FAILSAFE);
    } else if (g.failsafe_gcs == FS_GCS_SURFACE && motors.armed()) {
        set_mode(SURFACE, MODE_REASON_GCS_FAILSAFE);
    }
}

// executes terrain failsafe if data is missing for longer than a few seconds
//  missing_data should be set to true if the vehicle failed to navigate because of missing data, false if navigation is proceeding successfully
void Sub::failsafe_terrain_check()
{
    // trigger with 5 seconds of failures while in AUTO mode
    bool valid_mode = (control_mode == AUTO || control_mode == GUIDED);
    bool timeout = (failsafe.terrain_last_failure_ms - failsafe.terrain_first_failure_ms) > FS_TERRAIN_TIMEOUT_MS;
    bool trigger_event = valid_mode && timeout;

    // check for clearing of event
    if (trigger_event != failsafe.terrain) {
        if (trigger_event) {
            gcs_send_text(MAV_SEVERITY_CRITICAL,"Failsafe terrain triggered");
            failsafe_terrain_on_event();
        } else {
            Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_TERRAIN, ERROR_CODE_ERROR_RESOLVED);
            failsafe.terrain = false;
        }
    }
}

// This gets called if mission items are in ALT_ABOVE_TERRAIN frame
// Terrain failure occurs when terrain data is not found, or rangefinder is not enabled or healthy
// set terrain data status (found or not found)
void Sub::failsafe_terrain_set_status(bool data_ok)
{
    uint32_t now = millis();

    // record time of first and latest failures (i.e. duration of failures)
    if (!data_ok) {
        failsafe.terrain_last_failure_ms = now;
        if (failsafe.terrain_first_failure_ms == 0) {
            failsafe.terrain_first_failure_ms = now;
        }
    } else {
        // failures cleared after 0.1 seconds of persistent successes
        if (now - failsafe.terrain_last_failure_ms > 100) {
            failsafe.terrain_last_failure_ms = 0;
            failsafe.terrain_first_failure_ms = 0;
        }
    }
}

// terrain failsafe action
void Sub::failsafe_terrain_on_event()
{
    failsafe.terrain = true;
    Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_TERRAIN, ERROR_CODE_FAILSAFE_OCCURRED);

    // If rangefinder is enabled, we can recover from this failsafe
    if (!rangefinder_state.enabled || !auto_terrain_recover_start()) {
        failsafe_terrain_act();
    }


}

// Recovery failed, take action
void Sub::failsafe_terrain_act()
{
    switch (g.failsafe_terrain) {
    case FS_TERRAIN_HOLD:
        if (!set_mode(POSHOLD, MODE_REASON_TERRAIN_FAILSAFE)) {
            set_mode(ALT_HOLD, MODE_REASON_TERRAIN_FAILSAFE);
        }
        AP_Notify::events.failsafe_mode_change = 1;
        break;

    case FS_TERRAIN_SURFACE:
        set_mode(SURFACE, MODE_REASON_TERRAIN_FAILSAFE);
        AP_Notify::events.failsafe_mode_change = 1;
        break;

    case FS_TERRAIN_DISARM:
    default:
        init_disarm_motors();
    }
}

bool Sub::should_disarm_on_failsafe()
{
    switch (control_mode) {
    case STABILIZE:
    case ACRO:
        // if throttle is zero OR vehicle is landed disarm motors
        return ap.throttle_zero;
        break;
    case AUTO:
        // if mission has not started AND vehicle is landed, disarm motors
        return !ap.auto_armed;
        break;
    default:
        // used for AltHold, Guided, Loiter, RTL, Circle, Drift, Sport, Flip, PosHold
        // if landed disarm
        //            return ap.land_complete;
        return false;
        break;
    }
}

void Sub::update_events()
{
    ServoRelayEvents.update_events();
}