ardupilot/ArduPlane/test.pde

689 lines
16 KiB
Plaintext

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
#if CLI_ENABLED == ENABLED
// These are function definitions so the Menu can be constructed before the functions
// are defined below. Order matters to the compiler.
static int8_t test_radio_pwm(uint8_t argc, const Menu::arg *argv);
static int8_t test_radio(uint8_t argc, const Menu::arg *argv);
static int8_t test_failsafe(uint8_t argc, const Menu::arg *argv);
static int8_t test_gps(uint8_t argc, const Menu::arg *argv);
static int8_t test_adc(uint8_t argc, const Menu::arg *argv);
static int8_t test_imu(uint8_t argc, const Menu::arg *argv);
static int8_t test_gyro(uint8_t argc, const Menu::arg *argv);
static int8_t test_battery(uint8_t argc, const Menu::arg *argv);
static int8_t test_current(uint8_t argc, const Menu::arg *argv);
static int8_t test_relay(uint8_t argc, const Menu::arg *argv);
static int8_t test_wp(uint8_t argc, const Menu::arg *argv);
static int8_t test_airspeed(uint8_t argc, const Menu::arg *argv);
static int8_t test_pressure(uint8_t argc, const Menu::arg *argv);
static int8_t test_mag(uint8_t argc, const Menu::arg *argv);
static int8_t test_xbee(uint8_t argc, const Menu::arg *argv);
static int8_t test_eedump(uint8_t argc, const Menu::arg *argv);
static int8_t test_rawgps(uint8_t argc, const Menu::arg *argv);
static int8_t test_modeswitch(uint8_t argc, const Menu::arg *argv);
static int8_t test_dipswitches(uint8_t argc, const Menu::arg *argv);
// Creates a constant array of structs representing menu options
// and stores them in Flash memory, not RAM.
// User enters the string in the console to call the functions on the right.
// See class Menu in AP_Common for implementation details
static const struct Menu::command test_menu_commands[] PROGMEM = {
{"pwm", test_radio_pwm},
{"radio", test_radio},
{"failsafe", test_failsafe},
{"battery", test_battery},
{"relay", test_relay},
{"waypoints", test_wp},
{"xbee", test_xbee},
{"eedump", test_eedump},
{"modeswitch", test_modeswitch},
{"dipswitches", test_dipswitches},
// Tests below here are for hardware sensors only present
// when real sensors are attached or they are emulated
#if HIL_MODE == HIL_MODE_DISABLED
{"adc", test_adc},
{"gps", test_gps},
{"rawgps", test_rawgps},
{"imu", test_imu},
{"gyro", test_gyro},
{"airspeed", test_airspeed},
{"airpressure", test_pressure},
{"compass", test_mag},
{"current", test_current},
#elif HIL_MODE == HIL_MODE_SENSORS
{"adc", test_adc},
{"gps", test_gps},
{"imu", test_imu},
{"gyro", test_gyro},
{"compass", test_mag},
#elif HIL_MODE == HIL_MODE_ATTITUDE
#endif
};
// A Macro to create the Menu
MENU(test_menu, "test", test_menu_commands);
static int8_t
test_mode(uint8_t argc, const Menu::arg *argv)
{
Serial.printf_P(PSTR("Test Mode\n\n"));
test_menu.run();
return 0;
}
static void print_hit_enter()
{
Serial.printf_P(PSTR("Hit Enter to exit.\n\n"));
}
static int8_t
test_eedump(uint8_t argc, const Menu::arg *argv)
{
int i, j;
// hexdump the EEPROM
for (i = 0; i < EEPROM_MAX_ADDR; i += 16) {
Serial.printf_P(PSTR("%04x:"), i);
for (j = 0; j < 16; j++)
Serial.printf_P(PSTR(" %02x"), eeprom_read_byte((const uint8_t *)(i + j)));
Serial.println();
}
return(0);
}
static int8_t
test_radio_pwm(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
delay(20);
// Filters radio input - adjust filters in the radio.pde file
// ----------------------------------------------------------
read_radio();
Serial.printf_P(PSTR("IN:\t1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n"),
g.channel_roll.radio_in,
g.channel_pitch.radio_in,
g.channel_throttle.radio_in,
g.channel_rudder.radio_in,
g.rc_5.radio_in,
g.rc_6.radio_in,
g.rc_7.radio_in,
g.rc_8.radio_in);
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_radio(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
#if THROTTLE_REVERSE == 1
Serial.printf_P(PSTR("Throttle is reversed in config: \n"));
delay(1000);
#endif
// read the radio to set trims
// ---------------------------
trim_radio();
while(1){
delay(20);
read_radio();
update_servo_switches();
g.channel_roll.calc_pwm();
g.channel_pitch.calc_pwm();
g.channel_throttle.calc_pwm();
g.channel_rudder.calc_pwm();
// write out the servo PWM values
// ------------------------------
set_servos();
Serial.printf_P(PSTR("IN 1: %d\t2: %d\t3: %d\t4: %d\t5: %d\t6: %d\t7: %d\t8: %d\n"),
g.channel_roll.control_in,
g.channel_pitch.control_in,
g.channel_throttle.control_in,
g.channel_rudder.control_in,
g.rc_5.control_in,
g.rc_6.control_in,
g.rc_7.control_in,
g.rc_8.control_in);
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_failsafe(uint8_t argc, const Menu::arg *argv)
{
byte fail_test;
print_hit_enter();
for(int i = 0; i < 50; i++){
delay(20);
read_radio();
}
// read the radio to set trims
// ---------------------------
trim_radio();
oldSwitchPosition = readSwitch();
Serial.printf_P(PSTR("Unplug battery, throttle in neutral, turn off radio.\n"));
while(g.channel_throttle.control_in > 0){
delay(20);
read_radio();
}
while(1){
delay(20);
read_radio();
if(g.channel_throttle.control_in > 0){
Serial.printf_P(PSTR("THROTTLE CHANGED %d \n"), g.channel_throttle.control_in);
fail_test++;
}
if(oldSwitchPosition != readSwitch()){
Serial.printf_P(PSTR("CONTROL MODE CHANGED: "));
Serial.println(flight_mode_strings[readSwitch()]);
fail_test++;
}
if(g.throttle_fs_enabled && g.channel_throttle.get_failsafe()){
Serial.printf_P(PSTR("THROTTLE FAILSAFE ACTIVATED: %d, "), g.channel_throttle.radio_in);
Serial.println(flight_mode_strings[readSwitch()]);
fail_test++;
}
if(fail_test > 0){
return (0);
}
if(Serial.available() > 0){
Serial.printf_P(PSTR("LOS caused no change in APM.\n"));
return (0);
}
}
}
static int8_t
test_battery(uint8_t argc, const Menu::arg *argv)
{
if (g.battery_monitoring >=1 && g.battery_monitoring < 4) {
for (int i = 0; i < 80; i++){ // Need to get many samples for filter to stabilize
delay(20);
read_battery();
}
Serial.printf_P(PSTR("Volts: 1:%2.2f, 2:%2.2f, 3:%2.2f, 4:%2.2f\n"),
battery_voltage1,
battery_voltage2,
battery_voltage3,
battery_voltage4);
} else {
Serial.printf_P(PSTR("Not enabled\n"));
}
return (0);
}
static int8_t
test_current(uint8_t argc, const Menu::arg *argv)
{
if (g.battery_monitoring == 4) {
print_hit_enter();
delta_ms_medium_loop = 100;
while(1){
delay(100);
read_radio();
read_battery();
Serial.printf_P(PSTR("V: %4.4f, A: %4.4f, mAh: %4.4f\n"),
battery_voltage,
current_amps,
current_total);
// write out the servo PWM values
// ------------------------------
set_servos();
if(Serial.available() > 0){
return (0);
}
}
} else {
Serial.printf_P(PSTR("Not enabled\n"));
return (0);
}
}
static int8_t
test_relay(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
Serial.printf_P(PSTR("Relay on\n"));
relay.on();
delay(3000);
if(Serial.available() > 0){
return (0);
}
Serial.printf_P(PSTR("Relay off\n"));
relay.off();
delay(3000);
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_wp(uint8_t argc, const Menu::arg *argv)
{
delay(1000);
// save the alitude above home option
if(g.RTL_altitude < 0){
Serial.printf_P(PSTR("Hold current altitude\n"));
}else{
Serial.printf_P(PSTR("Hold altitude of %dm\n"), (int)g.RTL_altitude/100);
}
Serial.printf_P(PSTR("%d waypoints\n"), (int)g.command_total);
Serial.printf_P(PSTR("Hit radius: %d\n"), (int)g.waypoint_radius);
Serial.printf_P(PSTR("Loiter radius: %d\n\n"), (int)g.loiter_radius);
for(byte i = 0; i <= g.command_total; i++){
struct Location temp = get_cmd_with_index(i);
test_wp_print(&temp, i);
}
return (0);
}
static void
test_wp_print(struct Location *cmd, byte wp_index)
{
Serial.printf_P(PSTR("command #: %d id:%d options:%d p1:%d p2:%ld p3:%ld p4:%ld \n"),
(int)wp_index,
(int)cmd->id,
(int)cmd->options,
(int)cmd->p1,
cmd->alt,
cmd->lat,
cmd->lng);
}
static int8_t
test_xbee(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
Serial.printf_P(PSTR("Begin XBee X-CTU Range and RSSI Test:\n"));
while(1){
if (Serial3.available())
Serial3.write(Serial3.read());
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_modeswitch(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
Serial.printf_P(PSTR("Control CH "));
Serial.println(FLIGHT_MODE_CHANNEL, DEC);
while(1){
delay(20);
byte switchPosition = readSwitch();
if (oldSwitchPosition != switchPosition){
Serial.printf_P(PSTR("Position %d\n"), switchPosition);
oldSwitchPosition = switchPosition;
}
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_dipswitches(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
if (!g.switch_enable) {
Serial.println_P(PSTR("dip switches disabled, using EEPROM"));
}
while(1){
delay(100);
update_servo_switches();
if (g.mix_mode == 0) {
Serial.printf_P(PSTR("Mix:standard \trev roll:%d, rev pitch:%d, rev rudder:%d\n"),
(int)g.channel_roll.get_reverse(),
(int)g.channel_pitch.get_reverse(),
(int)g.channel_rudder.get_reverse());
} else {
Serial.printf_P(PSTR("Mix:elevons \trev elev:%d, rev ch1:%d, rev ch2:%d\n"),
(int)g.reverse_elevons,
(int)g.reverse_ch1_elevon,
(int)g.reverse_ch2_elevon);
}
if(Serial.available() > 0){
return (0);
}
}
}
//-------------------------------------------------------------------------------------------
// tests in this section are for real sensors or sensors that have been simulated
#if HIL_MODE == HIL_MODE_DISABLED || HIL_MODE == HIL_MODE_SENSORS
static int8_t
test_adc(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
adc.Init();
delay(1000);
Serial.printf_P(PSTR("ADC\n"));
delay(1000);
while(1){
for (int i=0;i<9;i++) Serial.printf_P(PSTR("%u\t"),adc.Ch(i));
Serial.println();
delay(100);
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_gps(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
delay(333);
// Blink GPS LED if we don't have a fix
// ------------------------------------
update_GPS_light();
g_gps->update();
if (g_gps->new_data){
Serial.printf_P(PSTR("Lat: %ld, Lon %ld, Alt: %ldm, #sats: %d\n"),
g_gps->latitude,
g_gps->longitude,
g_gps->altitude/100,
g_gps->num_sats);
}else{
Serial.printf_P(PSTR("."));
}
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_imu(uint8_t argc, const Menu::arg *argv)
{
//Serial.printf_P(PSTR("Calibrating."));
imu.init(IMU::COLD_START);
print_hit_enter();
delay(1000);
while(1){
delay(20);
if (millis() - fast_loopTimer > 19) {
delta_ms_fast_loop = millis() - fast_loopTimer;
G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator
fast_loopTimer = millis();
// IMU
// ---
dcm.update_DCM();
if(g.compass_enabled) {
medium_loopCounter++;
if(medium_loopCounter == 5){
compass.read(); // Read magnetometer
compass.calculate(dcm.get_dcm_matrix()); // Calculate heading
medium_loopCounter = 0;
}
}
// We are using the IMU
// ---------------------
Serial.printf_P(PSTR("r: %d\tp: %d\t y: %d\n"),
(int)dcm.roll_sensor / 100,
(int)dcm.pitch_sensor / 100,
(uint16_t)dcm.yaw_sensor / 100);
}
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_gyro(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
adc.Init();
delay(1000);
Serial.printf_P(PSTR("Gyro | Accel\n"));
delay(1000);
while(1){
imu.update(); // need this because we are not calling the DCM
Vector3f gyros = imu.get_gyro();
Vector3f accels = imu.get_accel();
Serial.printf_P(PSTR("%d\t%d\t%d\t|\t%d\t%d\t%d\n"),
(int)gyros.x,
(int)gyros.y,
(int)gyros.z,
(int)accels.x,
(int)accels.y,
(int)accels.z);
delay(100);
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_mag(uint8_t argc, const Menu::arg *argv)
{
if (!g.compass_enabled) {
Serial.printf_P(PSTR("Compass: "));
print_enabled(false);
return (0);
}
compass.set_orientation(MAG_ORIENTATION);
if (!compass.init()) {
Serial.println_P(PSTR("Compass initialisation failed!"));
return 0;
}
dcm.set_compass(&compass);
report_compass();
// we need the DCM initialised for this test
imu.init(IMU::COLD_START);
int counter = 0;
//Serial.printf_P(PSTR("MAG_ORIENTATION: %d\n"), MAG_ORIENTATION);
print_hit_enter();
while(1) {
delay(20);
if (millis() - fast_loopTimer > 19) {
delta_ms_fast_loop = millis() - fast_loopTimer;
G_Dt = (float)delta_ms_fast_loop / 1000.f; // used by DCM integrator
fast_loopTimer = millis();
// IMU
// ---
dcm.update_DCM();
medium_loopCounter++;
if(medium_loopCounter == 5){
compass.read(); // Read magnetometer
compass.calculate(dcm.get_dcm_matrix()); // Calculate heading
compass.null_offsets(dcm.get_dcm_matrix());
medium_loopCounter = 0;
}
counter++;
if (counter>20) {
Vector3f maggy = compass.get_offsets();
Serial.printf_P(PSTR("Heading: %ld, XYZ: %d, %d, %d,\tXYZoff: %6.2f, %6.2f, %6.2f\n"),
(wrap_360(ToDeg(compass.heading) * 100)) /100,
compass.mag_x,
compass.mag_y,
compass.mag_z,
maggy.x,
maggy.y,
maggy.z);
counter=0;
}
}
if (Serial.available() > 0) {
break;
}
}
// save offsets. This allows you to get sane offset values using
// the CLI before you go flying.
Serial.println_P(PSTR("saving offsets"));
compass.save_offsets();
return (0);
}
#endif // HIL_MODE == HIL_MODE_DISABLED || HIL_MODE == HIL_MODE_SENSORS
//-------------------------------------------------------------------------------------------
// real sensors that have not been simulated yet go here
#if HIL_MODE == HIL_MODE_DISABLED
static int8_t
test_airspeed(uint8_t argc, const Menu::arg *argv)
{
unsigned airspeed_ch = adc.Ch(AIRSPEED_CH);
// Serial.println(adc.Ch(AIRSPEED_CH));
Serial.printf_P(PSTR("airspeed_ch: %u\n"), airspeed_ch);
if (g.airspeed_enabled == false){
Serial.printf_P(PSTR("airspeed: "));
print_enabled(false);
return (0);
}else{
print_hit_enter();
zero_airspeed();
Serial.printf_P(PSTR("airspeed: "));
print_enabled(true);
while(1){
delay(20);
read_airspeed();
Serial.printf_P(PSTR("%fm/s\n"), airspeed / 100.0);
if(Serial.available() > 0){
return (0);
}
}
}
}
static int8_t
test_pressure(uint8_t argc, const Menu::arg *argv)
{
Serial.printf_P(PSTR("Uncalibrated relative airpressure\n"));
print_hit_enter();
home.alt = 0;
wp_distance = 0;
init_barometer();
while(1){
delay(100);
current_loc.alt = read_barometer() + home.alt;
Serial.printf_P(PSTR("Alt: %0.2fm, Raw: %ld\n"),
current_loc.alt / 100.0,
abs_pressure);
if(Serial.available() > 0){
return (0);
}
}
}
static int8_t
test_rawgps(uint8_t argc, const Menu::arg *argv)
{
print_hit_enter();
delay(1000);
while(1){
if (Serial3.available()){
digitalWrite(B_LED_PIN, HIGH); // Blink Yellow LED if we are sending data to GPS
Serial1.write(Serial3.read());
digitalWrite(B_LED_PIN, LOW);
}
if (Serial1.available()){
digitalWrite(C_LED_PIN, HIGH); // Blink Red LED if we are receiving data from GPS
Serial3.write(Serial1.read());
digitalWrite(C_LED_PIN, LOW);
}
if(Serial.available() > 0){
return (0);
}
}
}
#endif // HIL_MODE == HIL_MODE_DISABLED
#endif // CLI_ENABLED